WorldLII Home | Databases | WorldLII | Search | Feedback

Maltese Laws

You are here:  WorldLII >> Databases >> Maltese Laws >> National Interest (Enabling Powers) Act (Cap. 365) Enforcement Of European Union Sanctions (Iran) Regulations, 2010 (L.N. 15 Of 2011 )

Database Search | Name Search | Noteup | Download | Help

National Interest (Enabling Powers) Act (Cap. 365) Enforcement Of European Union Sanctions (Iran) Regulations, 2010 (L.N. 15 Of 2011 )



L.N. 15 of 2011

VERŻJONI ELETTRONIKA

B 253

NATIONAL INTEREST (ENABLING POWERS) ACT (CAP. 365)Enforcement of European Union Sanctions (Iran) Regulations, 2010

IN exercise of the powers conferred by article 3 of the National Interest (Enabling Powers) Act, the Prime Minister has made the following regulations:-

1. The title of these regulations is the Enforcement of

European Union Sanctions (Iran) Regulations, 2010.

2. In these regulations, unless the context otherwise requires –

Citation.

Interpretation.

Act;

“the Act” means the National Interest (Enabling Powers)

“Annex IV” means Annex IV to the Council Regulation referred to in regulation 3;

“the Council Regulation” means the Council Regulation referred to in regulation 3;

“IAEA” means the International Atomic Energy Agency; “Iran” means the Islamic Republic of Iran;

“Sanctions Monitoring Board” means the Monitoring Board established under regulation 2 of the Sanctions (Monitoring Board) Regulations, 2006;

“the Treaty” means the Treaty referred to in article 2 of the European Union Act.

3. For the purpose of article 3(4) of the Act, Council Regulation (EU) No 961/2010 of 25 October, 2010 on restrictive measures against Iran and repealing Regulation (EC) No 423/2007, is published in the English language in the Schedule to these regulations.

L.N. 327 of 2006

.

Cap. 460.

Text of Council

Regulation (EU) No

961/2010.

B 254 VERŻJONI ELETTRONIKA

Applicability

of the European

Union Act.

Authorisations for sale, supply, etc. of goods and technology.

Penalty.

4. For the purposes of article 3 of the European Union Act, the Council Regulation is binding in its entirety on Malta and shall be part of the domestic law thereof under the conditions laid down in the Treaty.5. (1) The Sanctions Monitoring Board may refuse to grant any authorisation for any sale, supply, transfer or export of the goods or technology included in Annex IV, where it has reasonable grounds to determine that the sale, supply, transfer or export thereof would contribute to one of the following activities:

(a) enrichment, reprocessing or heavy water-related activities of Iran;

(b) the development of nuclear weapon delivery systems by Iran; or

(c) the pursuit by Iran of activities related to other topics about which the IAEA has expressed concerns or has identified as outstanding.

(2) Where any authorisation for any sale, supply, transfer or export of the goods or technology included in Annex IV has been granted, the Sanctions Monitoring Board may annul, suspend, modify or revoke such authorisation where it has reasonable grounds to determine that the sale, supply, transfer or export thereof would contribute to the activities contained in sub- regulation (1).

(3) Where the Sanctions Monitoring Board refuses to grant an authorisation, or annuls, suspends, substantially limits or revokes an authorisation in accordance with sub-regulations (1) and (2), the respective authorities of Malta shall notify the authorities of other Member States of the European Union and the European Commission thereof, and share the relevant information with them, in compliance with applicable laws protecting the confidentiality of such information.

6 . A n y p e r s o n w h o c o m m i t s a n o ff e n c e a g a i n s t a n y provision of the Council Regulation to which these regulations apply, or against these regulations shall, on conviction, be liable to a fine (multa) not exceeding one hundred and sixteen thousand, four hundred and sixty-eight euro (€116,468).SCHEDULE (Regulation 3)VERŻJONI ELETTRONIKA

REGULATIONS

B 255

COUNCIL REGULATION (EU) No 961/2010 of 25 October 2010on restrictive measures against Iran and repealing Regulation (EC) No 423/2007

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European
Union, and in particular Article 215 thereof,
Having regard to Council Decision 2010/413/CFSP of 26 July
2010 concerning restrictive measures against Iran and repealing
Common Position 2007/140/CFSP (1),
Having regard to the joint proposal from the High Represen­ tative of the Union for Foreign Affairs and Security Policy and the European Commission,
Whereas:

(1) On 26 July 2010, the Council approved Decision

2010/413/CFSP confirming the restrictive measures taken since 2007 and providing for additional restrictive measures against the Islamic Republic of Iran (‘Iran’) in order to comply with UN Security Council Resolution 1929 (2010), as well as for accompanying measures as requested by the European Council in its Declaration of 17 June 2010.

(2) Those restrictive measures comprise, in particular, addi­ tional restrictions on trade in dual-use goods and tech­ nology, as well as equipment which might be used for internal repression, restrictions on trade in key equipment and technology for, and restrictions on investment in the Iranian oil and gas industry, restrictions on Iranian investment in the uranium mining and nuclear industry, restrictions on transfers of funds to and from Iran, restrictions concerning the Iranian banking sector, restrictions on Iran's access to the insurance and bonds markets of the Union and restrictions on providing certain services to Iranian ships and cargo aircraft.

(3) Decision 2010/413/CFSP also provided for additional categories of persons to be made subject to the

(1) OJ L 195, 27.7.2010, p. 39.

freezing of funds and economic resources and for certain other technical amendments to existing measures.

(4) Those restrictive measures fall within the scope of the Treaty on the Functioning of the European Union and, therefore, notably with a view to ensuring their uniform application by economic operators in all Member States, legislation at the level of the Union is necessary in order to implement them as far as the Union is concerned.

(5) Regulation (EC) No 423/2007 of 19 April 2007 concerning restrictive measures against Iran (2) enacted the restrictive measures taken by the Union further to Common Position 2007/140/CFSP (3). For the sake of clarity, Regulation (EC) No 423/2007 should be repealed and replaced by this Regulation.
(6) The revised restrictive measures concerning dual-use goods should cover all goods and technology set out in Annex I to Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items (4), with the exception of certain items in Category 5 thereof. Those Category 5 items which relate to nuclear and missile technology and are currently subject to a prohibition on their transfer to and from Iran should, nevertheless, remain subject to such prohibition. Moreover, a prohibition should also be imposed on the transfer to and from Iran of certain goods and technology which were previously subject to a prior authorisation requirement under Article 3 of Regulation (EC) No 423/2007.

(7) In order to ensure the effective implementation of the prohibition on the sale, supply, transfer or export to Iran of certain key equipment or technology which could be used in the key sectors of the oil and natural gas industries, a list of such key equipment and technology should be provided.

(2) OJ L 103, 20.4.2007, p. 1. (3) OJ L 61, 28.2.2007, p. 49. (4) OJ L 134, 29.5.2009, p. 1.

B 256 VERŻJONI ELETTRONIKA

(8) In addition, to be effective, restrictions on investment in the Iranian oil and gas sector should cover certain key activities, such as bulk gas transmission services for the purpose of transit or delivery to directly interconnected grids, and, for the same reason, should apply to joint ventures as well as other forms of associations and coop­ eration with Iran in the sector of the transmission of natural gas.

(9) The restrictive measures should not affect the import or export of oil or gas to and from Iran, including the fulfilment of payment obligations in connection with such import or export.

(10) Effective restrictions on Iranian investment in the Union require that measures be taken to prohibit natural or legal persons, entities and bodies subject to the juris­ diction of the Member States from enabling or auth­ orising such investment.

(11) It is prohibited, pursuant to the obligation to freeze the funds and economic resources of Islamic Republic of Iran Shipping Line (IRISL) and of designated entities owned or controlled by IRISL to load and unload cargoes on and from vessels owned or chartered by IRISL or by such entities in ports of Member States. However, the obli­ gation to freeze the funds and economic resources of IRISL and of designated entities owned or controlled by IRISL does not require the impounding or detention of vessels owned by such entities or the cargoes carried by them insofar as such cargoes belong to third parties, nor does it require the detention of the crew contracted by them.

(12) It should be clarified that submitting and forwarding the necessary documents to a bank for the purpose of their final transfer to a person, entity or body that is not listed, to trigger payments allowed under Article 18 of this Regulation, does not constitute making funds available within the meaning of Article 16(3) of this Regulation.

(13) This Regulation respects the fundamental rights and observes the principles recognised in particular by the Charter of Fundamental Rights of the European Union and notably the right to an effective remedy and to a fair trial, the right to property and the right to protection of personal data. This Regulation should be applied in accordance with those rights and principles.

(14) This Regulation also fully respects the obligations of Member States under the Charter of the United Nations and the legally binding nature of the United Nations Security Council Resolutions.

(15) The power to amend the lists in Annexes VII and VIII to this Regulation should be exercised by the Council, in

view of the specific threat to international peace and security posed by Iran as manifested by the deepening concern about its nuclear programme underlined by the European Council on 17 June 2010, and to ensure consistency with the process for amending and reviewing Annexes I and II to Decision 2010/413/CFSP.

(16) The procedure for amending the lists in Annexes VII and VIII to this Regulation should include providing designated natural or legal persons, entities or bodies with the grounds for listing, so as to give them an opportunity to submit observations. Where observations are submitted, or substantial new evidence is presented, the Council should review its decision in light of those observations and inform the person, entity or body concerned accordingly.

(17) For the implementation of this Regulation, and to create maximum legal certainty within the Union, the names and other relevant data concerning natural and legal persons, entities and bodies whose funds and economic resources must be frozen in accordance with the Regu­ lation, should be made public. Any processing of personal data of natural persons under this Regulation should respect Regulation (EC) No 45/2001 of the European Parliament and of the Council of

18 December 2000 on the protection of individuals with regard to the processing of personal data by the Community institutions and bodies and on the free movement of such data (1) and Directive 95/46/EC of the European Parliament and of the Council of
24 October 1995 on the protection of individuals with regard to the processing of personal data and on the free movement of such data (2).

(18) In order to ensure that the measures provided for in this Regulation are effective, it should enter into force on the day of its publication,

HAS ADOPTED THIS REGULATION: CHAPTER I

DEFINITIONS

Article 1

For the purposes of this Regulation the following definitions shall apply:
(a) ‘branch’ of a financial or credit institution means a place of business which forms a legally dependent part of a financial or credit institution and which carries out directly all or some of the transactions inherent in the business of financial or credit institutions;

(1) OJ L 8, 12.1.2001, p. 1.

(2) OJ L 281, 23.11.1995, p. 31.

VERŻJONI ELETTRONIKA

B 257

(b) ‘brokering services’ means:
(i) the negotiation or arrangement of transactions for the purchase, sale or supply of goods and technology from a third country to any other third country, or
(ii) the selling or buying of goods and technology that are located in third countries for their transfer to another third country.
(c) ‘contract or transaction’ means any transaction of whatever form and whatever the applicable law, whether comprising one or more contracts or similar obligations made between the same or different parties; for this purpose ‘contract’ includes a bond, guarantee or indemnity, particularly a financial guarantee or financial indemnity, and credit, whether legally independent or not, as well as any related provision arising under, or in connection with, the trans­ action;
(d) ‘credit institution’ means a credit institution as defined in Article 4(1) of Directive 2006/48/EC of the European Parliament and of the Council of 14 June 2006 relating to the taking up and pursuit of the business of credit institutions (1), including its branches inside or outside the Union;
(e) ‘customs territory of the Union’ means the territory as defined in Article 3 of Council Regulation (EEC) No
2913/92 of 12 October 1992 establishing the Community Customs Code (2) and in Commission Regu­ lation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Regulation (EEC) No 2913/92 (3);
(f) ‘economic resources’ means assets of every kind, whether tangible or intangible, movable or immovable, which are not funds, but which may be used to obtain funds, goods or services;
(g) ‘financial institution’ means
(i) an undertaking, other than a credit institution, which carries out one or more of the operations included in points 2 to 12 and points 14 and 15 of Annex I to Directive 2006/48/EC, including the activities of currency exchange offices (bureaux de change);
(ii) an insurance company duly authorised in accordance with Directive 2002/83/EC of the European Parliament
and of the Council of 5 November 2002 concerning life assurance (4), insofar as it carries out activities covered by that Directive;
(iii) an investment firm as defined in point 1 of Article 4(1) of Directive 2004/39/EC of the European Parliament and of the Council of 21 April 2004 on markets in financial instruments (5);
(iv) a collective investment undertaking marketing its units or shares; or
(v) an insurance intermediary as defined in Article 2(5) of Directive 2002/92/EC of the European Parliament and of the Council of 9 December 2002 on insurance mediation (6), with the exception of intermediaries referred to in Article 2(7) of that Directive, when they act in respect of life insurance and other investment related services;
including its branches inside or outside the Union.
(h) ‘freezing of economic resources’ means preventing the use of economic resources to obtain funds, goods or services in any way, including, but not limited to, by selling, hiring or mortgaging them;
(i) ‘freezing of funds’ means preventing any move, transfer, alteration, use of, access to, or dealing with funds in any way that would result in any change in their volume, amount, location, ownership, possession, character, desti­ nation or other change that would enable the funds to be used, including portfolio management;
(j) ‘funds’ means financial assets and benefits of every kind, including, but not limited to:
(i) cash, cheques, claims on money, drafts, money orders and other payment instruments;
(ii) deposits with financial institutions or other entities, balances on accounts, debts and debt obligations;
(iii) publicly-and privately-traded securities and debt instruments, including stocks and shares, certificates representing securities, bonds, notes, warrants, debentures and derivatives contracts;
(iv) interest, dividends or other income on or value accruing from or generated by assets;

(1) OJ L 177, 30.6.2006, p. 1. (2) OJ L 302, 19.10.1992, p. 1. (3) OJ L 253, 11.10.1993, p. 1.

(4) OJ L 345, 19.12.2002, p. 1. (5) OJ L 145, 30.4.2004, p. 1. (6) OJ L 9, 15.1.2003, p. 3.

B 258 VERŻJONI ELETTRONIKA

(v) credit, right of set-off, guarantees, performance bonds or other financial commitments;
(vi) letters of credit, bills of lading, bills of sale; and
(vii) documents showing evidence of an interest in funds or financial resources;
(k) ‘goods’ includes items, materials and equipment;
(l) ‘insurance’ means an undertaking or commitment whereby one or more natural or legal persons is or are obliged, in return for a payment, to provide one or more other persons, in the event of materialisation of a risk, with an indemnity or a benefit as determined by the undertaking or commitment;
(m) ‘Iranian person, entity or body’ means:
(i) the State of Iran or any public authority thereof; (ii) any natural person in, or resident in, Iran;
(iii) any legal person, entity or body having its registered office in Iran;
(iv) any legal person, entity or body, inside or outside Iran, owned or controlled directly or indirectly by one or more of the above mentioned persons or bodies;
(n) ‘reinsurance’ means the activity consisting in accepting risks ceded by an insurance undertaking or by another rein­ surance undertaking or, in the case of the association of underwriters known as Lloyd’s, the activity consisting in accepting risks, ceded by any member of Lloyd’s, by an insurance or reinsurance undertaking other than the association of underwriters known as Lloyd’s;
(r) ‘transfer of funds’ means any transaction carried out on behalf of a payer through a payment service provider by electronic means, with a view to making funds available to a payee at a payment service provider, irrespective of whether the payer and the payee are the same person. The terms payer, payee and payment service provider have the same meaning as in Regulation (EC) No
1781/2006 of the European Parliament and of
the Council of 15 November 2006 on information on the payer accompanying transfers of funds (1);
(s) ‘claim’ means any claim, whether asserted by legal proceedings or not, made before or after the date of entry into force of this Regulation, under or in connection with a contract or transaction, and includes in particular:
(i) a claim for performance of any obligation arising under or in connection with a contract or transaction;
(ii) a claim for extension or payment of a bond, financial guarantee or indemnity of whatever form;
(iii) a claim for compensation in respect of a contract or transaction;
(iv) a counterclaim;
(v) a claim for the recognition or enforcement, including by the procedure of exequatur, of a judgment, an arbi­ tration award or an equivalent decision, wherever made or given.

CHAPTER II

EXPORT AND IMPORT RESTRICTIONS

Article 2

(o) ‘Sanctions Committee’ means the Committee of the United Nations Security Council which was established pursuant to paragraph 18 of United Nations Security Council Resolution (‘UNSCR’) 1737 (2006);
(p) ‘technical assistance’ means any technical support related to repairs, development, manufacture, assembly, testing, main­ tenance, or any other technical service, and may take forms such as instruction, advice, training, transmission of working knowledge or skills or consulting services; including verbal forms of assistance;
(q) ‘territory of the Union’ means the territories of the Member
1. It shall be prohibited:
(a) to sell, supply, transfer or export, directly or indirectly, the goods and technology listed in Annexes I and II, whether or not originating in the Union, to any Iranian person, entity or body or for use in Iran; or
(b) to sell, supply, transfer or export, directly or indirectly, equipment which might be used for internal repression as listed in Annex III, whether or not originating in the Union, to any Iranian person, entity or body or for use in Iran;
States to which the Treaty is applicable, under the
conditions laid down in the Treaty, including their airspace;

(1) OJ L 345, 8.12.2006, p. 1.

VERŻJONI ELETTRONIKA

B 259

(c) to participate, knowingly and intentionally, in activities the object or effect of which is to circumvent the prohibitions referred to in points (a) and (b).
2. Annex I shall include goods and technology, including software, which are dual-use items or technology as defined in Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items, except for the goods and technology defined in Category 5 of Annex I to that Regu­ lation which are not included in the Nuclear Suppliers Group and Missile Technology Control Regime lists.
3. Annex II shall include other goods and technology which could contribute to Iran's enrichment-related, reprocessing or heavy-water-related activities, to the development of nuclear weapon delivery systems, or to the pursuit of activities related to other topics about which the IAEA has expressed concerns or has identified as outstanding, including those determined by the UN Security Council or by the Sanctions Committee.
4. Annexes I, II and III shall not include goods and tech­ nology included in the Common Military List of the European Union (1) (‘Common Military List’).

Article 3

1. A prior authorisation shall be required for the sale, supply, transfer or export, directly or indirectly, of the goods and tech­ nology listed in Annex IV, whether or not originating in the Union, to any Iranian person, entity or body or for use in Iran.
2. For all exports for which an authorisation is required under this Article, such authorisation shall be granted by the competent authorities of the Member State where the exporter is established and shall be in accordance with the detailed rules laid down in Article 11 of Regulation (EC) No 428/2009. The authorisation shall be valid throughout the Union.
3. Annex IV shall include any goods and technology, other than those included in Annexes I and II, which could contribute to enrichment-related, reprocessing or heavy water-related activities, to the development of nuclear weapon delivery systems, or to the pursuit of activities related to other topics about which the International Atomic Energy Agency (IAEA) has expressed concerns or has identified as outstanding.
or export thereof would contribute to one of the following activities:
(a) Iran's enrichment-related, reprocessing or heavy water- related activities;
(b) the development of nuclear weapon delivery systems by
Iran; or
(c) the pursuit by Iran of activities related to other topics about which the IAEA has expressed concerns or has identified as outstanding.
6. Under the conditions set out in paragraph 5, the competent authorities of the Member States, as identified on the websites listed in Annex V, may annul, suspend, modify or revoke an export authorisation which they have granted.
7. Where the competent authority of a Member State refuses to grant an authorisation, or annul, suspend, substantially limit or revoke an authorisation in accordance with paragraph 5, the Member State shall notify the other Member States and the Commission thereof and share the relevant information with them, while complying with the provisions concerning the confidentiality of such information of Council Regulation (EC) No 515/97 of 13 March 1997 on mutual assistance between the administrative authorities of the Member States and cooperation between the latter and the Commission to ensure the correct application of the law on customs and agri­ cultural matters (2).
8. Before a Member State grants an authorisation in accordance with paragraph 5 for a transaction which is essentially identical to a transaction which is the subject of a still valid denial issued by another Member State or by other Member States under paragraphs 6 and 7, it will first consult the Member State or States which issued the denial. If, following such consultations, the Member State concerned decides to grant an authorisation, it shall inform the other Member States and the Commission thereof, providing all relevant information to explain the decision.

Article 4

It shall be prohibited to purchase, import or transport from Iran the goods and technology listed in Annexes I, II and III, whether the item concerned originates in Iran or not.
4. Exporters shall supply the competent authorities with all relevant information required for their application for an export authorisation.
1. It shall be prohibited:

Article 5

5. The competent authorities of the Member States, as identified on the websites listed in Annex V, shall not grant any authorisation for any sale, supply, transfer or export of the goods or technology included in Annex IV, if they have reasonable grounds to determine that the sale, supply, transfer
(a) to provide, directly or indirectly, technical assistance related to the goods and technology listed in the Common Military List, or related to the provision, manufacture, maintenance and use of goods included in that list, to any Iranian person, entity or body or for use in Iran;

(1) OJ C 69, 18.3.2010, p. 19. (2) OJ L 82, 22.3.1997, p. 1.

B 260 VERŻJONI ELETTRONIKA

(b) to provide, directly or indirectly, technical assistance or brokering services related to the goods and technology listed in Annexes I and II, or related to the provision, manu­ facture, maintenance and use of goods listed in Annexes I and II, to any Iranian person, entity or body or for use in Iran;
(c) to provide, directly or indirectly, technical assistance or brokering services related to equipment which might be used for internal repression as listed in Annex III, to any Iranian person, entity or body or for use in Iran;
(d) to provide, directly or indirectly, financing or financial assistance related to the goods and technology listed in the Common Military List or in Annexes I, II and III, including in particular grants, loans and export credit insurance, for any sale, supply, transfer or export of such items, or for any provision of related technical assistance to any Iranian person, entity or body or for use in Iran;
(e) to participate, knowingly and intentionally, in activities the object or effect of which is to circumvent the prohibitions referred to in points (a) to (d).
2. The provision of the following shall be subject to an authorisation from the competent authority of the Member State concerned:
(a) technical assistance or brokering services related to goods and technology listed in Annex IV and to the provision, manufacture, maintenance and use of those items, directly or indirectly to any Iranian person, entity or body or for use in Iran;
(b) financing or financial assistance related to goods and tech­ nologies referred to in Annex IV, including in particular grants, loans and export credit insurance, for any sale, supply, transfer or export of those items, or for any provision of related technical assistance, directly or indirectly, to any Iranian person, entity or body or for use in Iran.
3. The competent authorities of the Member States, as identified on the websites listed in Annex V, shall not grant any authorisation for the transactions referred to in paragraph
2, if they have reasonable grounds to determine that the action would contribute to one of the following activities:
(a) Iran's enrichment-related, reprocessing or heavy water- related activities;
(b) the development of nuclear weapon delivery systems by
Iran; or
(c) the pursuit by Iran of activities related to other topics about which the IAEA has expressed concerns or has identified as outstanding.

Article 6

Article 2(1)(a) shall not apply to:
(a) the direct or indirect transfer of goods falling within Part B of Annex I, through the territories of Member States when those goods are sold, supplied, transferred or exported to, or for use in, Iran for a light water reactor in Iran the construction of which has begun before December 2006;
(b) transactions mandated by the International Atomic Energy
Agency (IAEA) technical cooperation programme;
(c) goods supplied, transferred to or for use in, Iran due to obligations of State Parties under the Paris Convention on the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons and on their Destruction of
13 January 1993.

Article 7

1. The competent authorities of the Member States, as identified on the websites listed in Annex V, may grant, under such terms and conditions as they deem appropriate, an authorisation for a transaction in relation to goods and technology referred to in Article 2(1) or assistance or brokering services referred to in Article 5(1), if they determine, except when subparagraph (c) applies, that the transaction would clearly not contribute to the development of technologies in support of Iran's proliferation-sensitive nuclear activities, or to the development of nuclear weapon delivery systems, including where such goods and technology, assistance or brokering services are for food, agricultural, medical or other humanitarian purposes, and if the following conditions are met:
(a) the contract for delivery of the goods or technology, or for the provision of assistance or brokering services, includes appropriate end-user guarantees;
(b) Iran has undertaken not to use the goods or technology concerned, or if applicable, the assistance or brokering services concerned, in proliferation-sensitive nuclear activities or for development of nuclear weapon delivery systems; and
(c) in those cases where the transaction concerns goods or technology contained in the Nuclear Suppliers Group or Missile Technology Control Regime lists, the Sanctions Committee has determined in advance and on a case-by- case basis that the transaction would clearly not contribute to the development of technologies in support of Iran's proliferation-sensitive nuclear activities, or to the devel­ opment of nuclear weapon development delivery systems.

VERŻJONI ELETTRONIKA

B 261

2. The Member State concerned shall inform the other Member States and the Commission when it rejects a request for an authorisation.
3. Paragraph 1 shall not apply to transactions or brokering services in relation to goods and technology referred to in Annex III.

Article 8

1. It shall be prohibited to sell, supply, transfer or export key equipment or technology listed in Annex VI, directly or indirectly, to any Iranian person, entity or body or for use in, Iran.
2. Annex VI shall include key equipment and technology for the following key sectors of the oil and gas industry in Iran:
(a) exploration of crude oil and natural gas; (b) production of crude oil and natural gas; (c) refining;
(d) liquefaction of natural gas.
3. Annex VI shall not include items included in the Common
Military List, or in Annex I, Annex II or Annex IV.
date of entry into force of this Regulation, or by a contract or agreement concluded before 26 July 2010 and relating to an investment in Iran made before 26 July 2010, nor shall they prevent the execution of an obligation arising therefrom, provided that the natural or legal person, entity or body seeking to engage in the transaction or to provide assistance has notified, at least 20 working days in advance, the trans­ action or assistance to the competent authorities of the Member State in which it is established, as identified on the websites listed in Annex V.

CHAPTER III

RESTRICTIONS ON FINANCING OF CERTAIN ENTREPRISES

Article 11

1. The following shall be prohibited:
(a) the granting of any financial loan or credit to any Iranian person, entity or body referred to in paragraph (2);
(b) the acquisition or extension of a participation in any Iranian person, entity or body referred to in paragraph (2);
(c) the creation of any joint venture with any Iranian person, entity or body referred to in paragraph (2).
(d) the participation, knowingly and intentionally, in activities, the object or effect of which is to circumvent the prohibitions referred to in points (a), (b) and (c).
It shall be prohibited:

Article 9

2. The prohibition in paragraph (1) shall apply to any Iranian person, entity or body engaged:
(a) to provide, directly or indirectly, technical assistance or brokering services related to the key equipment and tech­ nology listed in Annex VI, or related to the provision, manufacture, maintenance and use of goods listed in Annex VI, to any Iranian person, entity or body or for use in Iran.
(b) to provide, directly or indirectly, financing or financial assistance related to the key equipment and technology listed in Annex VI, to any Iranian person, entity or body or for use in Iran.
(c) to participate, knowingly and intentionally, in activities the object or effect of which is to circumvent the prohibitions referred to in points (a) and (b).

Article 10

The prohibitions in Articles 8 and 9 shall not apply to transactions required by a trade contract concluded before the
(a) in the manufacture of goods or technology listed in the
Common Military List or in Annex I or II;
(b) in the manufacture of equipment which might be used for internal repression as listed in Annex III;
(c) in the exploration or production of crude oil and natural gas, the refining of fuels or the liquefaction of natural gas.
3. For the purposes of paragraph 2(c) only, the following definitions shall apply:
(a) ‘exploration of crude oil and natural gas’ includes the explo­ ration for, prospection of and management of crude oil and natural gas reserves, as well as the provision of geological services in relation to such reserves;

B 262 VERŻJONI ELETTRONIKA

(b) ‘production of crude oil and natural gas’ includes bulk gas transmission services for the purpose of transit or delivery to directly interconnected grids;
(c) ‘refining’ means the processing, conditioning or preparation for the ultimately final sale of fuels.
4. It shall be prohibited to establish cooperation with an Iranian person, entity or body engaged in the transmission of natural gas as referred to in paragraph 3(b).
5. For the purposes of paragraph 4, ‘cooperation’ means:
(a) the sharing of investment costs in an integrated or managed supply chain for the receipt or delivery of natural gas directly from or to the territory of Iran; and
(b) direct co-operation for the purpose of investing in liquefied natural gas facilities within the territory of Iran or in liquefied natural gas facilities directly connected thereto.

Article 12

1. The making of an investment through transactions referred to in Article 11(1) in an Iranian person, entity or body engaged in the manufacture of goods or technology listed in Annex IV shall be subject to an authorisation from the competent authority of the Member State concerned.
(a) the Iranian person, entity or body has committed itself to apply appropriate end-user guarantees as regards the goods or technology concerned;
(b) Iran has undertaken not to use the goods or technology concerned in proliferation-sensitive nuclear activities or for development of nuclear weapon delivery systems; and
(c) in those cases where the investment is made in an Iranian person, entity or body engaged in the manufacture of goods or technology contained in the Nuclear Suppliers Group and Missile Technology Control Regime lists, the Sanctions Committee has determined in advance and on a case-by- case basis that the transaction would clearly not contribute to the development of technologies in support of Iran's proliferation-sensitive nuclear activities, or to the devel­ opment of nuclear weapon development delivery systems.

Article 14

Article 11(2)(c) shall not apply to the granting of a financial loan or credit or to the acquisition or extension of a partici­ pation , if the following conditions are met:
(a) the transaction is required by an agreement or contract concluded before 26 July 2010; and
(b) the competent authority has been informed at least 20 working days in advance of that agreement or contract.
2. The competent authorities of the Member States, as identified on the websites listed in Annex V, shall not grant any authorisation for the transactions referred to in paragraph
1, if they have reasonable grounds to determine that the action would contribute to one of the following activities:
It shall be prohibited:

Article 15

(a) Iran's enrichment-related, reprocessing or heavy water- related activities;
(b) the development of nuclear weapon delivery systems by
Iran; or
(c) the pursuit by Iran of activities related to other topics about which the IAEA has expressed concerns or has identified as outstanding.

Article 13

By way of derogation from Article 11(2)(a), the competent authorities of the Member States, as identified on the websites listed in Annex V, may grant, under such terms and conditions as they deem appropriate, an authorisation to make an investment through transactions referred to in Article 11(1), if the following conditions are met:
(a) to accept or approve, by concluding an agreement or by any other means, that the granting of any finacial loan or credit, or the acquisition or extension of a participation, or the creation of any joint venture be made by one or more Iranian persons, entities or bodies, in an enterprise engaged in any of the following activities:
(i) uranium mining,
(ii) uranium enrichment and reprocessing of uranium;
(iii) the manufacture of goods or technology included in the Nuclear Suppliers Group and Missile Technology Control Regime lists.
(b) to participate, knowingly and intentionally, in activities, the object or effect of which is to circumvent the prohibition in point (a).

VERŻJONI ELETTRONIKA

B 263

CHAPTER IV

FREEZING OF FUNDS AND ECONOMIC RESOURCES

Article 16

1. All funds and economic resources belonging to, owned, held or controlled by the persons, entities and bodies listed in Annex VII shall be frozen. Annex VII shall include the persons, entities and bodies designated by the United Nations Security Council or by the Sanctions Committee in accordance with paragraph 12 of UNSCR 1737 (2006), paragraph 7 of UNSCR 1803 (2008) or paragraph 11, 12 or 19 of UNSCR 1929 (2010).
2. All funds and economic resources belonging to, owned, held or controlled by the persons, entities and bodies listed in Annex VIII shall be frozen. Annex VIII shall include the natural and legal persons, entities and bodies, not covered by Annex VII, who, in accordance with Article 20(1)(b) of Council Decision 2010/413/CFSP, have been identified as:
(a) being engaged in, directly associated with, or providing support for Iran's proliferation-sensitive nuclear activities or the development of nuclear weapon delivery systems by Iran, including through involvement in the procurement of prohibited goods and technology, or being owned or controlled by such a person, entity or body, including through illicit means, or acting on their behalf or at their direction;
(b) being a natural or legal person, entity or body that has assisted a listed person, entity or body to evade or violate the provisions of this Regulation, Council Decision 2010/413/CFSP or UNSCR 1737 (2006), UNSCR
1747 (2007), UNSCR 1803 (2008) and UNSCR 1929 (2010);
(c) being a senior member of the Islamic Revolutionary Guard Corps or a legal person, entity or body owned or controlled by the Islamic Revolutionary Guard Corps or by one of more of its senior members;
(d) being a legal person, entity or body owned or controlled by the Islamic Republic of Iran Shipping Lines (IRISL).
It shall be prohibited, pursuant to the obligation to freeze the funds and economic resources of IRISL and of designated entities owned or controlled by IRISL, to load and unload cargoes on and from vessels owned or chartered by IRISL or by such entities in ports of Member States. That prohibition shall not prevent the execution of a contract concluded before the entry into force of this Regulation.
The obligation to freeze the funds and economic resources of IRISL and of designated entities owned or controlled by IRISL shall not require the impounding or detention of
vessels owned by such entities or the cargoes carried by them insofar as such cargoes belong to third parties, nor does it require the detention of the crew contracted by them.
3. No funds or economic resources shall be made available, directly or indirectly, to or for the benefit of the natural or legal persons, entities or bodies listed in Annexes VII and VIII.
4. The participation, knowingly and intentionally, in activities the object or effect of which is, directly or indirectly, to circumvent the measures referred to in paragraphs 1, 2 and 3 shall be prohibited.
5. Annexes VII and VIII shall include the grounds for listing of listed persons, entities and bodies, as provided by the Security Council or by the Sanctions Committee for Annex VII.
6. Annexes VII and VIII shall also include, where available, information necessary to identify the natural or legal persons, entities and bodies concerned, as provided by the Security Council or by the Sanctions Committee for Annex VII. With regard to natural persons, such information may include names including aliases, date and place of birth, nationality, passport and ID card numbers, gender, adress, if known, and function or profession. With regard to legal persons, entities and bodies, such information may include names, place and date of regis­ tration, registration number and place of business. Annex VII shall also include the date of designation by the Security Council or by the Sanctions Committee.

Article 17

By way of derogation from Article 16, the competent authorities of the Member States, as indicated on the websites listed in Annex V, may authorise the release of certain frozen funds or economic resources, if the following conditions are met:
(a) the funds or economic resources are the subject of a judicial, administrative or arbitral lien established before the date on which the person, entity or body referred to in Article 16 has been designated by the Sanctions Committee, the Security Council or the Council or of a judicial, administrative or arbitral judgment rendered prior to that date;
(b) the funds or economic resources will be used exclusively to satisfy claims secured by such a lien or recognised as valid in such a judgment, within the limits set by applicable laws and regulations governing the rights of persons having such claims;
(c) the lien or judgment is not for the benefit of a person, entity or body listed in Annex VII or VIII;

B 264 VERŻJONI ELETTRONIKA

(d) recognising the lien or judgment is not contrary to public policy in the Member State concerned; and
(e) where Article 16(1) applies, the Sanctions Committee has been notified by the Member State of the lien or judgment.

Article 18

By way of derogation from Article 16 and provided that a payment by a person, entity or body listed in Annex VII or VIII is due under a contract or agreement that was concluded by, or an obligation that arose for the person, entity or body concerned, before the date on which that person, entity or body had been designated by the Sanctions Committee, the Security Council or by the Council, the competent authorities of the Member States, as indicated on the websites listed in Annex V, may authorise, under such conditions as they deem appropriate, the release of certain frozen funds or economic resources, if the following conditions are met:
(a) the competent authority concerned has determined that:
(i) the funds or economic resources shall be used for a payment by a person, entity or body listed in Annex VII or VIII;
(ii) the contract, agreement or obligation will not contribute to the manufacture, sale, purchase, transfer, export, import, transport or use of goods and tech­ nology listed in Annexes I, II, III and VI; and
(iii) the payment is not in breach of Article 16(3);
(b) where Article 16(1) applies, the Member State concerned has notified the Sanctions Committee of that determination and its intention to grant an authorisation, and the Sanctions Committee has not objected to that course of action within ten working days of notification; and
(c) where Article 16(2) applies, the Member State concerned has, at least two weeks prior to the grant of the authori­ sation, notified the other Member States and the Commision of that determination and its intention to grant an auth­ orisation.

Article 19

1. By way of derogation from Article 16, the competent authorities of the Member States, as identified on the websites listed in Annex V, may authorise, under such conditions as they deem appropriate, the release of certain frozen funds or economic resources, or the making available of certain funds or economic resources, provided that the following conditions are met:
(a) the competent authority concerned has determined that the funds or economic resources are:
(i) necessary to satisfy the basic needs of persons listed in Annex VII or VIII, and their dependent family members, including payments for foodstuffs, rent or mortgage, medicines and medical treatment, taxes, insurance premiums, and public utility charges;
(ii) intended exclusively for payment of reasonable profes­ sional fees and reimbursement of incurred expenses associated with the provision of legal services; or
(iii) intended exclusively for payment of fees or service charges for routine holding or maintenance of frozen funds or economic resources; and
(b) where the authorisation concerns a person, entity or body listed in Annex VII, the Member State concerned has notified the Sanctions Committee of that determination and its intention to grant an authorisation, and the Sanctions Committee has not objected to that course of action within five working days of notification.
2. By way of derogation from Article 16, the competent authorities of the Member States, as indicated on the websites listed in Annex V, may authorise the release of certain frozen funds or economic resources or the making available of certain funds or economic resources, after having determined that the funds or economic resources are necessary for extraordinary expenses or for payment for or transfer of goods when procured for a light water reactor in Iran the construction of which has begun before December 2006, or for goods referred to in Article 6(b) and (c), provided that the following conditions are met:
(a) where the authorisation concerns a person, entity or body listed in Annex VII, the Sanctions Committee has been notified of that determination by the Member State concerned and the determination has been approved by that Committee; and
(b) where the authorisation concerns a person, entity or body listed in Annex VIII, the competent authority has notified the grounds on which it considers that a specific authori­ sation should be granted to the other competent authorities of the Member States and to the Commission at least two weeks before the authorisation.
3. The relevant Member State shall inform the other Member States and the Commission of any authorisation granted under paragraphs 1 or 2.

VERŻJONI ELETTRONIKA

B 265

Article 20

1. Article 16(3) shall not prevent financial or credit insti­ tutions from crediting frozen accounts where they receive funds transferred onto the account of a listed natural or legal person, entity or body, provided that any additions to such accounts shall also be frozen. The financial or credit institution shall inform the competent authorities about such transactions without delay.
2. Article 16(3) shall not apply to the addition to frozen accounts of:
(a) interest or other earnings on those accounts; or
(b) payments due under contracts, agreements or obligations that were concluded or arose before the date on which the person, entity or body referred to in Article 16 has been designated by the Sanctions Committee, the Security Council or by the Council;
provided that any such interest or other earnings and payments are frozen in accordance with Article 16(1) or (2).
3. This Article shall not be construed as authorising transfers of funds referred to in Article 21.

CHAPTER V

RESTRICTIONS ON TRANSFERS OF FUNDS AND ON FINANCIAL SERVICES

Article 21

1. Transfer of funds to and from an Iranian person, entity or body shall be processed as follows:
(a) transfers due on transactions regarding foodstuffs, healthcare, medical equipment, or for humanitarian purposes shall be carried out without any prior authori­ sation. The transfer shall be notified in advance in writing to the competent authorities of the Member States, as identified on the websites listed in Annex V, if above EUR 10 000 or equivalents;
(b) any other transfer below EUR 40 000 shall be carried out without any prior authorisation. The transfer shall be notified in advance in writing to the competent authorities of the Member States, as identified on the websites listed in Annex V, if above EUR 10 000 or equivalent;
(c) any other transfer of or above EUR 40 000 or equivalent shall require a prior authorisation of the competent authorities of the Member States, as identified on the websites listed in Annex V.
2. These provisions shall apply regardless of whether the transfer of funds is executed in a single operation or in several operations which appear to be linked.
3. Notifications and requests for authorisation relating to the transfer of funds to an Iranian person, entity or body shall be addressed by or on behalf of the payment service provider of the payer as referred to in Article 1(r) to the competent authorities of the Member State where the initial order to execute the transfer is given.
Notifications and requests for authorisation relating to the transfer of funds from an Iranian person, entity or body shall be addressed by or on behalf of the payment service provider of the payee as referred to in Article 1(r) to the competent authorities of the Member State in which the payee is resident or the payment service provider is established.
If the payments service provider of the payer or the payee does not fall under the scope of Article 39, notifications and requests for authorisation shall be addressed by the payer or payee to the competent authorities of the Member State in which the payer or payee is resident.
4. For the purposes of paragraph 1(c), the competent authorities of the Member States, as identified on the websites listed in Annex V, shall grant, under such terms and conditions as they deem appropriate, an authorisation for a transfer of funds having a value of EUR 40 000 or more, unless they have reasonable grounds to determine that the transfer of funds for which the authorisation is requested, would contribute to one of the following activities:
(a) Iran's enrichment-related, reprocessing or heavy water- related activities;
(b) the development of nuclear weapon delivery systems by
Iran;
(c) the pursuit by Iran of activities related to other topics about which the IAEA has expressed concerns or has identified as outstanding; or
(d) prohibited activities related to the exploration of crude oil and natural gas, production of crude oil and natural gas, refining, or liquefaction of natural gas as referred to in Articles 8, 9 and 11 by an Iranian person, entity or body.
A competent authority may charge a fee for the assessment of requests for authorisation.

B 266 VERŻJONI ELETTRONIKA

An authorisation shall be deemed granted if a competent authority has received a request in writing for authorisation and, within four weeks, the competent authority has not objected in writing to the transfer of funds. If the objection is raised because an investigation is pending, the competent authority shall state this and communicate its decision as soon as possible. The competent authorities shall have access, directly or indirectly, on a timely basis to the financial, administrative and law enforcement related information necessary for carrying out the investigation.
The Member State concerned shall inform the other Member States and the Commission when it rejects a request for authorisation.
5. This article shall not apply where an authorisation for a transfer has been granted in accordance with Articles 13, 17,
18, 19 or 20.

Article 22

1. Branches and subsidiaries, falling within the scope of Article 39, of credit and financial institutions domiciled in Iran shall notify the competent authority of the Member State where they are established, as identified on the website mentioned in Annex V, of all transfers of funds carried out or received by them, the names of the parties and the amount and the date of the transaction, within five working days after carrying out or receiving the transfer of funds concerned. If the information is available, the notification must specify the nature of the transaction and, where appro­ priate, the nature of the goods covered by the transaction and must, in particular, state whether the goods are covered by Annex I, II, III, IV or VI of this Regulation and, if their export is subject to authorisation, indicate the number of the licence granted.
2. Subject to and in accordance with the information-sharing arrangements, the other notified competent authorities shall without delay transmit that data, as necessary, in order to prevent any transaction that could contribute to proliferation- sensitive nuclear activities or to the development of nuclear weapons delivery systems, to the competent authorities of other Member States where the counterparts to such trans­ actions are established.

Article 23

1. Credit and financial institutions which fall within the scope of Article 39 shall, in their activities with credit and financial institutions referred to in paragraph 2, and in order to prevent such activities from contributing to proliferation- sensitive nuclear activities or to the development of nuclear weapon delivery systems:
(a) exercise continuous vigilance over account activity, particularly through their programmes on customer due diligence and under their obligations relating to money laundering and financing of terrorism;
(b) require that in payment instructions all information fields which relate to the originator and beneficiary of the trans­ action in question be completed and if that information is not supplied, refuse the transaction;
(c) maintain all records of transactions for a period of five years and make them available to national authorities on request;
(d) if they suspect or have reasonable grounds to suspect that funds are related to proliferation financing, promptly report their suspicions to the financial intelligence unit (FIU) or to another competent authority designated by the Member State concerned, as indicated on the websites listed in Annex V, without prejudice to Articles 5 and 16. The FIU or such other competent authority will serve as a national centre for receiving and analysing suspicious transaction reports regarding potential proliferation financing. The FIU or such other competent authority shall have access, directly or indirectly, on a timely basis to the financial, adminis­ trative and law enforcement information that it requires to properly undertake this function, including the analysis of suspicious transaction reports.
The above requirements for credit and financial institutions shall be complementary to existing obligations deriving from Regu­ lation (EC) No 1781/2006 and from the implementation of Directive 2005/60/EC of the European Parliament and of the Council of 26 October 2005 on the prevention of the use of the financial system for the purpose of money laundering and terrorist financing (1).
2. The measures set out in paragraph 1 shall apply to credit and financial institutions in their activities with:
(a) credit and financial institutions domiciled in Iran, including the Central Bank of Iran;
(b) branches and subsidiaries, where they fall within the scope of Article 39, of credit and financial institutions domiciled in Iran;
(c) branches and subsidiaries, where they do not fall within the scope of Article 39, of credit and financial institutions domiciled in Iran;
(d) credit and financial institutions that are not domiciled in Iran but are controlled by persons and entities domiciled in Iran.

(1) OJ L 309, 25.11.2005, p. 15.

VERŻJONI ELETTRONIKA

B 267

Article 24

1. It shall be prohibited for credit and financial institutions falling within the scope of Article 39 to do any of the following:
(d) to acquire or to extend a participation, or to acquire any other ownership interest, in a credit or financial institution falling within the scope of Article 39 by any credit or financial institution referred to in Article 23(2).
(a) to open a new bank account with a credit or financial institution domiciled in Iran, including the Central Bank of Iran, or with any credit or financial institution referred
It shall be prohibited:

Article 25

to in Article 23(2);
(b) to establish a new correspondent banking relationship with a credit or financial institution domiciled in Iran, including the Central Bank of Iran, or with any credit or financial institution referred to in Article 23(2),
(c) to open a new representative office in Iran or to establish a new branch or subsidiary in Iran;
(d) to establish a new joint venture with a credit or financial institution domiciled in Iran, including the Central Bank of Iran, or with any credit or financial institution referred to in Article 23(2).
2. It shall be prohibited:
(a) to authorise the opening of a representative office or the establishment of a branch or subsidiary in the Union of a credit or financial institution domiciled in Iran, including the Central Bank of Iran, or of any credit or financial insti­ tution referred to in Article 23(2);
(b) to conclude agreements for, or on behalf of, a credit or financial institution domiciled in Iran, including the Central Bank of Iran, or for, or on behalf of, any credit or financial institution referred to in Article 23(2) pertaining to the opening of a representative office or the estab­ lishment of a branch or subsidiary in the Union;
(c) to grant an authorisation for taking up and pursuing the business of credit institution or for any other business requiring prior authorisation, by a representative office, branch or subsidiary of a credit or financial institution domiciled in Iran, including the Central Bank of Iran, or of any credit or financial institution referred to in Article 23(2), if the representative office, branch or subsidiary was not operational before 26 July 2010.
(a) to sell or purchase public or public-guaranteed bonds issued after 26 July 2010, directly or indirectly, to or from any of the following:
(i) Iran or its Government, and its public bodies, corporations and agencies;
(ii) a credit or financial institution domiciled in Iran, including the Central Bank of Iran, or any credit or financial institution referred to in Article 23(2);
(iii) a natural person or a legal person, entity or body acting on behalf or at the direction of a legal person, entity or body referred to in (i) or (ii);
(iv) a legal person, entity or body owned or controlled by a person, entity or body referred to in (i), (ii) or (iii);
(b) to provide brokering services with regard to public or public-guaranteed bonds issued after 26 July 2010 to a person, entity or body referred to in point (a);
(c) to assist a person, entity or body referred to in point (a) in order to issue public or public-guaranteed bonds, by providing brokering services, advertising or any other service with regard to such bonds.

Article 26

1. It shall be prohibited:
(a) to provide insurance or re-insurance to:
(i) Iran or its Government, and its public bodies, corporations and agencies;
(ii) an Iranian person, entity or body other than a natural person; or
(iii) a natural person or a legal person, entity or body when acting on behalf or at the direction of a legal person, entity or body referred to in (i) or (ii).

B 268 VERŻJONI ELETTRONIKA

(b) to participate, knowingly and intentionally, in activities, the object or effect of which is to circumvent the prohibition in point (a).
2. Points (i) and (ii) of paragraph 1(a) shall not apply to the provision of compulsory or third party insurance to Iranian persons, entities or bodies based in the Union.
3. Point (iii) of paragraph 1(a) shall not apply to the provision of insurance, including health and travel insurance, to individuals acting in their private capacity, except for persons listed in Annexes VII and VIII, and re-insurance relating thereto.
Point (iii) of paragraph 1(a) shall not prevent the provision of insurance or re-insurance to the owner of a vessel, aircraft or vehicle chartered by a person, entity or body referred to in point (i) or (ii) of paragraph 1(a) and which is not listed in Annexes VII or VIII.
For the purpose of point (iii) of paragraph 1(a), a person, entity or body shall not be considered to act at the direction of a person, entity or body referred to in points (i) and (ii) of paragraph 1(a) where that direction is for the purposes of docking, loading, unloading or safe transit of a vessel or aircraft temporarly in Iranian waters or airspace.
4. This Article prohibits the extension or renewal of insurance and re-insurance agreements concluded before the entry into force of this Regulation, but, without prejudice to Article 16(3), it does not prohibit compliance with agreements concluded before that date.

CHAPTER VI RESTRICTIONS ON TRANSPORT Article 27

1. To prevent the transfer of goods and technology which
are covered by the Common Military List or the supply, sale, transfer, export or import of which is prohibited by this Regu­ lation, all goods brought into or leaving the customs territory of the Union from or to Iran shall be made subject to pre-arrival or pre-departure information to be submitted to the competent customs authorities of the Member State concerned.
2. The rules governing the obligation to provide pre-arrival and pre-departure information, in particular regarding the person who provides that information, the time limits to be respected and the data required, shall be as determined in the relevant provisions concerning entry and exit summary declar­ ations as well as customs declarations in Regulation (EEC) No
2913/92 and in Regulation (EEC) No 2454/93.
3. Furthermore, the person who provides the information referred to in paragraph 2, shall declare whether the goods are covered by the Common Military List or by this Regulation and, where their export is subject to authorisation, specify the particulars of the export licence granted.
4. Until 31 December 2010 the entry and exit summary declarations and the required additional elements referred to in paragraph 3 may be submitted in written form using commercial, port or transport information, provided that they contain the necessary details.
5. As from 1 January 2011, the required additional elements referred to in this Article shall be submitted either in written form or using a customs declaration as appropriate.

Article 28

1. The provision by nationals of Member States or from the territories of Member States of bunkering or ship supply services, or any other servicing of vessels, to vessels owned or controlled, directly or indirectly, by an Iranian person, entity or body shall be prohibited where the providers of the service have information, including from the competent customs authorities on the basis of the pre-arrival and pre-departure information referred to in Article 27, that provides reasonable grounds to believe that the vessels carry goods covered by the Common Military List or goods whose supply, sale, transfer or export is prohibited under this Regulation, unless the provision of such services is necessary for humanitarian purposes.
2. The provision by nationals of Member States, or from the territories of Member States, of engineering and maintenance services to cargo aircraft owned or controlled, directly or indirectly, by an Iranian person, entity or body shall be prohibited, where the providers of the service have information, including from the competent customs authorities on the basis of the pre-arrival and pre-departure information referred to in Article 27, that provides reasonable grounds to believe that the cargo aircraft carry goods covered by the Common Military List or goods the supply, sale, transfer or export of which is prohibited under this Regulation, unless the provision of such services is necessary for humanitarian and safety purposes.
3. The prohibitions in paragraphs 1 and 2 shall apply until the cargo has been inspected and, if necessary, seized or disposed of, as the case may be.
Any seizure and disposal may, in accordance with national legislation or the decision of a competent authority, be carried out at the expense of the importer or be recovered from any other person or entity responsible for the attempted illicit supply, sale, transfer or export.

VERŻJONI ELETTRONIKA

B 269

CHAPTER VII

GENERAL AND FINAL PROVISIONS

Article 29

1. No claims in connection with any contract or transaction the performance of which would have been affected, directly or indirectly, in whole or in part, by the measures imposed under Regulation (EC) No 423/2007 or this Regulation, including claims for indemnity or any other claim of this type, such as a claim for compensation or a claim under a guarantee, notably a claim for extension or payment of a bond, guarantee or indemnity, particularly a financial guarantee or financial indemnity, of whatever form, shall be satisfied, if they are made by:
(a) designated persons, entities or bodies listed in Annexes VII
and VIII;
(b) any other Iranian person, entity or body, including the
Iranian government;
(c) any person, entity or body acting through or on behalf of one of the persons, entities or bodies referred to in points (a) and (b).
2. The performance of a contract or transaction shall be regarded as having been affected by the measures imposed under Regulation (EC) No 423/2007 or by this Regulation where the existence or content of the claim results directly or indirectly from those measures.
3. In any proceedings for the enforcement of a claim, the onus of proving that satisfying the claim is not prohibited by paragraph 1 shall be on the person seeking the enforcement of that claim.
4. This Article is without prejudice to the right of the persons, entities and bodies referred to in paragraph 1 to judicial review of the legality of the non-performance of contractual obligations in accordance with Regulation (EC) No
423/2007 or this Regulation.

Article 30

For the purposes of Articles 8 and 9, point (c) of Article 11(2), and Articles 21 and 26, any body, entity or holder of rights derived from an original award before the entry into force of this Regulation by a sovereign Government other than Iran, of a production sharing agreement shall not be considered an Iranian person, entity or body. In such cases and in relation to Article 8, the competent authority of the Member State may require appropriate end-user guarantees from any body or entity for any sale, supply, transfer or export of any key equipment or technology listed in Annex VI.

Article 31

1. Without prejudice to the applicable rules concerning reporting, confidentiality and professional secrecy, natural and legal persons, entities and bodies shall:
(a) supply immediately any information which would facilitate compliance with this Regulation, such as information on accounts and amounts frozen in accordance with Article 16, to the competent authorities of the Member States, as indicated on the websites listed in Annex V, where they are resident or located, and shall transmit such information, directly or through the Member States, to the Commission;
(b) cooperate with the competent authorities, as indicated on the websites listed in Annex V, in any verification of this information.
2. Any additional information received directly by the Commission shall be made available to the Member State concerned.
3. Any information provided or received in accordance with this Article shall be used only for the purposes for which it was provided or received.

Article 32

1. The freezing of funds and economic resources or the refusal to make funds or economic resources available, carried out in good faith on the basis that such action is in accordance with this Regulation, shall not give rise to liability of any kind on the part of the natural or legal person or entity or body implementing it, or its directors or employees, unless it is proved that the funds and economic resources were frozen or withheld as a result of negligence.
2. The prohibitions set out in the present Regulation shall not give rise to liability of any kind on the part of the natural or legal persons or entities concerned, if they did not know, and had no reasonable cause to suspect, that their actions would infringe these prohibitions.
3. The disclosure in good faith, as provided for in Articles
21, 22 and 23, by an institution or by a person covered by this
Regulation or an employee or director of such an institution, of the information referred to in Articles 21, 22 and 23 shall not
give rise to liability of any kind on the part of the institution or person or its directors or employees.

Article 33

1. A Member State may take all action it deems necessary to ensure that relevant international, Union or national legal obli­ gations concerning the health and safety of workers and envi­ ronmental protection are respected where cooperation with an Iranian person, entity or body may be affected by the imple­ mentation of this Regulation.
2. For the purpose of action taken pursuant to paragraph 1, the prohibitions in Articles 8 and 9, point (c) of Article 11(2), and Articles 16(2), 21 and 26 shall not apply.

B 270 VERŻJONI ELETTRONIKA

3. Member States shall inform each other in advance of action pursuant to paragraph 1.

Article 34

The Commission and Member States shall immediately inform each other of the measures taken under this Regulation and shall supply each other with any other relevant information at their disposal in connection with this Regulation, in particular information in respect of violations and enforcement problems and judgments issued by national courts.
6. The list in Annex VIII shall be reviewed in regular intervals and at least every 12 months.

Article 37

1. Member States shall lay down the rules on penalties applicable to infringements of this Regulation and shall take all measures necessary to ensure that they are implemented. The penalties provided for shall be effective, proportionate and dissuasive.
The Commission shall:

Article 35

2. Member States shall notify the Commission of those rules without delay after the entry into force of this Regulation and shall notify it of any subsequent amendment.
(a) amend Annex II on the basis of determinations made by either the United Nations Security Council or the Sanctions Committee or on the basis of information supplied by Member States;
(b) amend Annex IV on the basis of information supplied by
Member States;
(c) amend Annex V on the basis of information supplied by
Member States.

Article 36

1. Where the Security Council or the Sanctions Committee lists a natural or legal person, entity or body, the Council shall include such natural or legal person, entity or body in Annex VII.
2. Where the Council decides to subject a natural or legal person, entity or body to the measures referred to in Article 16(2), it shall amend Annex VIII accordingly.
3. The Council shall communicate its decision, including the grounds for listing, to the natural or legal person, entity or body referred to in paragraphs 1 and 2, either directly, if the address is known, or through the publication of a notice, providing such natural or legal person, entity or body with an opportunity to present observations.
4. Where observations are submitted, or where substantial new evidence is presented, the Council shall review its decision and inform the natural or legal person, entity or body accordingly.
5. Where the United Nations decides to delist a natural or legal person, entity or body, or to amend the identifying data of a listed natural or legal person, entity or body, the Council shall amend Annex VII accordingly.

Article 38

1. Member States shall designate the competent authorities referred to in this Regulation and identify them on the websites listed in Annex V. Member States shall notify the Commission of any changes in the addresses of their websites listed in Annex V.
2. Member States shall notify the Commission of their competent authorities, including the contact details of those competent authorities, without delay after the entry into force of this Regulation, and shall notify it of any subsequent amendment.
3. Where this Regulation sets out a requirement to notify, inform or otherwise communicate with the Commission, the address and other contact details to be used for such communi­ cation shall be those indicated in Annex V.

Article 39

This Regulation shall apply:
(a) within the territory of the Union, including its airspace;
(b) on board any aircraft or any vessel under the jurisdiction of a Member State;
(c) to any person inside or outside the territory of the Union who is a national of a Member State;
(d) to any legal person, entity or body which is incorporated or constituted under the law of a Member State;
(e) to any legal person, entity or body in respect of any business done in whole or in part within the Union.

VERŻJONI ELETTRONIKA

B 271

Article 40

Regulation (EC) No 423/2007 is hereby repealed. References to the repealed regulation shall be construed as references to this Regulation.

Article 41

This Regulation shall enter into force on the day of its publication in the Official Journal of the European

Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 25 October 2010

For the Council The President C. ASHTON

B 272 VERŻJONI ELETTRONIKA

ANNEX I

PART A

Goods and technology referred to in point (a) of Article 2(1), Articles 2(2) and 4, and points (b) and (d) ofArticle 5(1)

This Annex comprises all goods and technology listed in Annex I to Regulation (EC) No 428/2009, as defined therein, except the following:

Item from Annex I to Regulation (EC) No 428/2009

Description

5A001 Telecommunications systems, equipment, components and accessories as follows:

a. Any type of telecommunications equipment having any of the following characteristics, functions or features:

1. Specially designed to withstand transitory electronic effects or electromagnetic pulse effects, both arising from a nuclear explosion;

2. Specially hardened to withstand gamma, neutron or ion radiation; or

3. Specially designed to operate outside the temperature range from 218 K (– 55 °C) to

397 K (124 °C);

Note: 5A001.a.3. applies only to electronic equipment.

Note: 5A001.a.2. and 5A001.a.3. do not control equipment designed or modified for use on board satellites.

b. Telecommunication systems and equipment, and specially designed components and accessories therefor, having any of the following characteristics, functions or features:

1. Being underwater untethered communications systems having any of the following:

a. An acoustic carrier frequency outside the range from 20 kHz to 60 kHz;

b. Using an electromagnetic carrier frequency below 30 kHz;

c. Using electronic beam steering techniques; or

d. Using ‘lasers’ or light-emitting diodes (LEDs) with an output wavelength greater than

400 nm and less than 700 nm, in a ‘local area network’;

2. Being radio equipment operating in the 1,5 MHz to 87,5 MHz band and having all of the following:

a. Automatically predicting and selecting frequencies and ‘total digital transfer rates’ per channel to optimise the transmission; and

b. Incorporating a linear power amplifier configuration having a capability to support multiple signals simultaneously at an output power of 1 kW or more in the frequency range of 1,5 MHz or more but less than 30 MHz, or 250 W or more in the frequency range of 30 MHz or more but not exceeding 87,5 MHz, over an

‘instantaneous bandwidth’ of one octave or more and with an output harmonic and distortion content of better than – 80 dB;

3. Being radio equipment employing ‘spread spectrum’ techniques, including ‘frequency hopping’ techniques, other than those specified in 5A001.b.4. and having any of the following:

a. User programmable spreading codes; or

b. A total transmitted bandwidth which is 100 or more times the bandwidth of any one information channel and in excess of 50 kHz;

Note: 5A001.b.3.b. does not control radio equipment specially designed for use with civil cellular radio-communications systems.

Note: 5A001.b.3 does not control equipment designed to operate at an output power of 1 W or less.

VERŻJONI ELETTRONIKA

B 273

Item from Annex I to Regulation (EC) No 428/2009

Description

4. Being radio equipment employing ultra-wideband modulation techniques, having user programmable channelising codes, scrambling codes or network identification codes and having any of the following:

a. A bandwidth exceeding 500 MHz; or

b. A ‘fractional bandwidth’ of 20 % or more;

5. Being digitally controlled radio receivers having all of the following:

a. More than 1,000 channels;

b. A ‘frequency switching time’ of less than 1 ms;

c. Automatic searching or scanning of a part of the electromagnetic spectrum; and d. Identification of the received signals or the type of transmitter; or

Note: 5A001.b.5. does not control radio equipment specially designed for use with civil cellular radio-communications systems.

6. Employing functions of digital ‘signal processing’ to provide ‘voice coding’ output at rates of less than 2,400 bit/s:

Technical Notes:

1. For variable rate ‘voice coding’, 5A001.b.6. applies to the ‘voice coding’ output of continuous speech.

2. For the purposes of 5A001.b.6., ‘voice coding’ is defined as the technique to take samples of human voice and then convert these samples into a digital signal, taking into account specific characteristics of human speech.

c. Optical fibre communication cables, optical fibres and accessories, as follows:

1. Optical fibres of more than 500 m in length, and specified by the manufacturer as being capable of withstanding a ‘proof test’ tensile stress of 2 x 109 N/m2 or more;

Technical Note:

‘Proof Test’: on-line or off-line production screen testing that dynamically applies a prescribed tensile stress over a 0,5 to 3 m length of fibre at a running rate of 2 to 5 m/ s while passing between capstans approximately 150 mm in diameter. The ambient temperature is a nominal 293 K (20 °C) and relative humidity 40 %. Equivalent national standards may be used for executing the proof test.

2. Optical fibre cables and accessories, designed for underwater use;

Note: 5A001.c.2. does not control standard civil telecommunication cables and accessories.

N.B. 1: For underwater umbilical cables, and connectors therefor, see 8A002.a.3.

N.B. 2: For fibre-optic hull penetrators or connectors, see 8A002.c.

d. ‘Electronically steerable phased array antennae’ operating above 31,8 GHz;

B 274 VERŻJONI ELETTRONIKA

Item from Annex I to Regulation (EC) No 428/2009

Description

Note: 5A001.d. does not control ‘electronically steerable phased array antennae’ for landing systems with instruments meeting ICAO standards covering Microwave Landing Systems (MLS).

e. Radio direction finding equipment operating at frequencies above 30 MHz and having all of the following, and specially designed components therefor:

1. ‘Instantaneous bandwidth’ of 10 MHz or more; and

2. Capable of finding a Line Of Bearing (LOB) to non-cooperating radio transmitters with a signal duration of less than 1 ms;

f. Jamming equipment specially designed or modified to intentionally and selectively interfere with, deny, inhibit, degrade or seduce mobile telecommunications services and perform any of the following, and specially designed components therefore:

1. Simulate the functions of Radio Access Network (RAN) equipment;

2. Detect and exploit specific characteristics of the mobile telecommunications protocol employed (e.g., GSM); or

3. Exploit specific characteristics of the mobile telecommunications protocol employed

(e.g., GSM);

N.B.: For GNSS jamming equipment see Military Goods Controls.

g. Passive Coherent Location (PCL) systems or equipment, specially designed for detecting and tracking moving objects by measuring reflections of ambient radio frequency emissions, supplied by non-radar transmitters:

Technical Note:

Non-radar transmitters may include commercial radio, television or cellular telecommuni­

cations base stations.

Note: 5A001.g. does not control any of the following:

a. Radio-astronomical equipment; or

b. Systems or equipment, that require any radio transmission from the target.

h. Electronic equipment designed or modified to prematurely activate or prevent the initiation of Radio Controlled Improvised Explosive Devices (RCIED):

N.B.: SEE ALSO MILITARY GOODS CONTROLS.

5A002

‘Information security’ systems, equipment and components therefor, as follows:

a. Systems, equipment, application specific ‘electronic assemblies’, modules and integrated circuits for ‘information security’, as follows and other specially designed components therefor:

N.B.: For the control of Global Navigation Satellite Systems (GNSS) receiving equipment containing or employing decryption (i.e., GPS or GLONASS), see 7A005.

1. Designed or modified to use ‘cryptography’ employing digital techniques performing any cryptographic function other than authentication or digital signature and having any of the following:

VERŻJONI ELETTRONIKA

B 275

Item from Annex I to Regulation (EC) No 428/2009

Description

Technical Notes:

1. Authentication and digital signature functions include their associated key management function.

2. Authentication includes all aspects of access control where there is no encryption of files or text except as directly related to the protection of passwords, Personal Identification Numbers (PINs) or similar data to prevent unauthorised access.

3. ‘Cryptography’ does not include ‘fixed’ data compression or coding techniques.

Note: 5A002.a.1. includes equipment designed or modified to use ‘cryptography’

employing analogue principles when implemented with digital techniques.

a. A ‘symmetric algorithm’ employing a key length in excess of 56 bits; or b. An ‘asymmetric algorithm’ where the security of the algorithm is based on

any of the following:

1. Factorisation of integers in excess of 512 bits (e.g., RSA);

2. Computation of discrete logarithms in a multiplicative group of a finite field of size greater than 512 bits (e.g., Diffie-Hellman over Z/pZ); or

3. Discrete logarithms in a group other than mentioned in 5A002.a.1.b.2. in excess of 112 bits (e.g., Diffie-Hellman over an elliptic curve);

2. Designed or modified to perform cryptanalytic functions;

3. Not used;

4. Specially designed or modified to reduce the compromising emanations of information- bearing signals beyond what is necessary for health, safety or electromagnetic inter­ ference standards;

5. Designed or modified to use cryptographic techniques to generate the spreading code for ‘spread spectrum’ systems, other than those specified in 5A002.a.6., including the hopping code for ‘frequency hopping’ systems;

6. Designed or modified to use cryptographic techniques to generate channelising codes, scrambling codes or network identification codes, for systems using ultra-wideband modulation techniques and having any of the following:

a. A bandwidth exceeding 500 MHz; or

b. A ‘fractional bandwidth’ of 20 % or more;

7. Non-cryptographic information and communications technology (ICT) security systems and devices evaluated to an assurance level exceeding class EAL-6 (evaluation assurance level) of the Common Criteria (CC) or equivalent;

8. Communications cable systems designed or modified using mechanical, electrical or electronic means to detect surreptitious intrusion;

9. Designed or modified to use ‘quantum cryptography’.

Technical Note:

‘Quantum cryptography’ is also known as Quantum Key Distribution (QKD).

Note: 5A002 does not control any of the following:

a. ‘Personalised smart cards’ having any of the following:

1. Where the cryptographic capability is restricted for use in equipment or systems excluded from control under entries b. to g. of this Note; or

B 276 VERŻJONI ELETTRONIKA

Item from Annex I to Regulation (EC) No 428/2009

Description

2. For general public-use applications where the cryptographic capability is not user- accessible and it is specially designed and limited to allow protection of personal data stored within;

N.B. If a ‘personalised smart card’ has multiple functions, the control status of each function is assessed individually.

b. Receiving equipment for radio broadcast, pay television or similar restricted audience broadcast of the consumer type, without digital encryption except that exclusively used for sending the billing or programme-related information back to the broadcast providers;

c. Equipment where the cryptographic capability is not user-accessible and which is specially designed and limited to allow any of the following:

1. Execution of copy-protected ‘software’;

2. Access to any of the following:

a. Copy-protected contents stored on read-only media; or

b. Information stored in encrypted form on media (e.g., in connection with the protection of intellectual property rights) when the media is offered for sale in identical sets to the public;

3. Copying control of copyright protected audio/video data; or

4. Encryption and/or decryption for protection of libraries, design attributes, or associated data for the design of semiconductor devices or integrated circuits;

d. Cryptographic equipment specially designed and limited for banking use or ‘money transactions’;

Technical Note:

‘Money transactions’ in 5A002 Note d. includes the collection and settlement of fares or credit functions.

e. Portable or mobile radiotelephones for civil use (e.g., for use with commercial civil cellular radio communication systems) that are not capable of transmitting encrypted data directly to another radiotelephone or equipment (other than Radio Access Network (RAN) equipment), nor of passing encrypted data through RAN equipment (e.g., Radio Network Controller (RNC) or Base Station Controller (BSC));

f. Cordless telephone equipment not capable of end-to-end encryption where the maximum effective range of unboosted cordless operation (i.e. a single, unrelayed hop between terminal and home base station) is less than 400 metres according to the manufacturer's specifications; or

g. Portable or mobile radiotelephones and similar client wireless devices for civil use, that implement only published or commercial cryptographic standards (except for anti-piracy functions, which may be non-published) and also meet the provisions of paragraphs b. to d. of the Cryptography Note (Note 3 in Category 5 - Part 2), that have been customised for a specific civil industry application with features that do not affect the cryptographic functionality of these original non-customised devices;

h. Equipment specially designed for the servicing of portable or mobile radiotelephones and similar client wireless devices that meet all the provisions of the Cryptography Note (Note 3 in Category 5, Part 2), where the servicing equipment meets all of the following:

1. The cryptographic functionality of the servicing equipment cannot easily be changed by the user of the equipment;

VERŻJONI ELETTRONIKA

B 277

Item from Annex I to Regulation (EC) No 428/2009

Description

2. The servicing equipment is designed for installation without further substantial support by the supplier; and

3. The servicing equipment cannot change the cryptographic functionality of the device being serviced;

i. Wireless ‘personal area network’ equipment that implement only published or commercial cryptographic standards and where the cryptographic capability is limited to a nominal operating range not exceeding 30 metres according to the manufacturer's specifications.

5B001

Telecommunications test, inspection and production equipment, components and accessories, as follows:

a. Equipment and specially designed components or accessories therefor, specially designed for the ‘development’, ‘production’ or ‘use’ of equipment, functions or features, specified in

5A001;

Note: 5B001.a. does not control optical fibre characterization equipment.

b. Equipment and specially designed components or accessories therefor, specially designed for the ‘development’ of any of the following telecommunication transmission or switching equipment:

1. Equipment employing digital techniques designed to operate at a ‘total digital transfer rate’ exceeding 15 Gbit/s;

Technical Note:

For switching equipment the ‘total digital transfer rate’ is measured at the highest speed port or line.

2. Equipment employing a ‘laser’ and having any of the following:

a. A transmission wavelength exceeding 1 750 nm;

b. Performing ‘optical amplification’ using praseodymium-doped fluoride fibre amplifiers (PDFFA);

c. Employing coherent optical transmission or coherent optical detection techniques

(also called optical heterodyne or homodyne techniques); or

d. Employing analogue techniques and having a bandwidth exceeding 2,5 GHz;

Note: 5B001.b.2.d. does not control equipment specially designed for the ‘development’

of commercial TV systems.

3. Equipment employing ‘optical switching’;

4. Radio equipment employing Quadrature-Amplitude-Modulation (QAM) techniques above level 256; or

5. Equipment employing ‘common channel signalling’ operating in non-associated mode of operation.

5B002

‘Information security’ test, inspection and ‘production’ equipment, as follows:

a. Equipment specially designed for the ‘development’ or ‘production’ of equipment specified in 5A002 or 5B002.b.;

b. Measuring equipment specially designed to evaluate and validate the ‘information security’

functions of the equipment specified in 5A002 or ‘software’ specified in 5D002.a. or

5D002.c.

B 278 VERŻJONI ELETTRONIKA

Item from Annex I to Regulation (EC) No 428/2009

Description

5D001

‘Software’ as follows:

a. ‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment, functions or features, specified in 5A001;

b. ‘Software’ specially designed or modified to support ‘technology’ specified in 5E001;

c. Specific ‘software’ specially designed or modified to provide characteristics, functions or features of equipment, specified in 5A001 or 5B001;

d. ‘Software’ specially designed or modified for the ‘development’ of any of the following telecommunication transmission or switching equipment:

1. Equipment employing digital techniques designed to operate at a ‘total digital transfer rate’ exceeding 15 Gbit/s;

Technical Note:

For switching equipment the ‘total digital transfer rate’ is measured at the highest speed port or line.

2. Equipment employing a ‘laser’ and having any of the following:

a. A transmission wavelength exceeding 1,750 nm; or

b. Employing analogue techniques and having a bandwidth exceeding 2.5 GHz;

Note: 5D001.d.2.b. does not control ‘software’ specially designed or modified for the

‘development’ of commercial TV systems.

3. Equipment employing ‘optical switching’; or

4. Radio equipment employing Quadrature-Amplitude-Modulation (QAM) techniques above level 256.

5D002

‘Software’ as follows:

a. ‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment specified in 5A002 or ‘software’ specified in 5D002.c.;

b. ‘Software’ specially designed or modified to support ‘technology’ specified in 5E002;

c. Specific ‘software’, as follows:

1. ‘Software’ having the characteristics, or performing or simulating the functions of the equipment, specified in 5A002;

2. ‘Software’ to certify ‘software’ specified in 5D002.c.1.

Note: 5D002 does not control ‘software’ as follows:

a. ‘Software’ required for the ‘use’ of equipment excluded from control by the Note to 5A002;

b. ‘Software’ providing any of the functions of equipment excluded from control by the Note to 5A002.

VERŻJONI ELETTRONIKA

B 279

Item from Annex I to Regulation (EC) No 428/2009

Description

5E001 ‘Technology’ as follows:

a. ‘Technology’ according to the General Technology Note for the ‘development’, ‘production’

or ‘use’ (excluding operation) of equipment, functions or features specified in 5A001 or

‘software’ specified in 5D001.a.;

b. Specific ‘technology’ as follows:

1. ‘Required’ ‘technology’ for the ‘development’ or ‘production’ of telecommunications equipment specially designed to be used on board satellites;

2. ‘Technology’ for the ‘development’ or ‘use’ of ‘laser’ communication techniques with the capability of automatically acquiring and tracking signals and maintaining communi­ cations through exoatmosphere or sub-surface (water) media;

3. ‘Technology’ for the ‘development’ of digital cellular radio base station receiving equipment whose reception capabilities that allow multi-band, multi-channel, multi- mode, multi-coding algorithm or multi-protocol operation can be modified by changes in ‘software’;

4. ‘Technology’ for the ‘development’ of ‘spread spectrum’ techniques, including ‘frequency hopping’ techniques;

c. ‘Technology’ according to the General Technology Note for the ‘development’ or

‘production’ of any of the following:

1. Equipment employing digital techniques designed to operate at a ‘total digital transfer rate’ exceeding 15 Gbit/s;

Technical Note:

For switching equipment the ‘total digital transfer rate’ is measured at the highest speed port or line.

2. Equipment employing a ‘laser’ and having any of the following:

a. A transmission wavelength exceeding 1,750 nm;

b. Performing ‘optical amplification’ using Praseodymium-Doped Fluoride Fibre

Amplifiers (PDFFA);

c. Employing coherent optical transmission or coherent optical detection techniques

(also called optical heterodyne or homodyne techniques);

d. Employing wavelength division multiplexing techniques of optical carriers at less than 100 GHz spacing; or

e. Employing analogue techniques and having a bandwidth exceeding 2,5 GHz;

Note: 5E001.c.2.e. does not control ‘technology’ for the ‘development’ or

‘production’ of commercial TV systems.

N.B.: For ‘technology’ for the ‘development’ or ‘production’ of non-telecommuni­

cations equipment employing a laser, see 6E.

3. Equipment employing ‘optical switching’;

4. Radio equipment having any of the following:

a. Quadrature-Amplitude-Modulation (QAM) techniques above level 256;

b. Operating at input or output frequencies exceeding 31,8 GHz; or

Note: 5E001.c.4.b. does not control ‘technology’ for the ‘development’ or

B 280 VERŻJONI ELETTRONIKA

Item from Annex I to Regulation (EC) No 428/2009

Description

‘production’ of equipment designed or modified for operation in any frequency band which is ‘allocated by the ITU’ for radio-communications services, but not for radio- determination.

c. Operating in the 1,5 MHz to 87,5 MHz band and incorporating adaptive techniques providing more than 15 dB suppression of an interfering signal;

5. Equipment employing ‘common channel signalling’ operating in non-associated mode of operation; or

6. Mobile equipment having all of the following:

a. Operating at an optical wavelength greater than or equal to 200 nm and less than or equal to 400 nm; and

b. Operating as a ‘local area network’;

d. ‘Technology’ according to the General Technology Note for the ‘development’ or

‘production’ of Microwave Monolithic Integrated Circuit (MMIC) power amplifiers specially designed for telecommunications and having any of the following:

1. Rated for operation at frequencies exceeding 3,2 GHz up to and including 6 GHz and with an average output power greater than 4 W (36 dBm) with a ‘fractional bandwidth’ greater than 15 %;

2. Rated for operation at frequencies exceeding 6 GHz up to and including 16 GHz and with an average output power greater than 1 W (30 dBm) with a ‘fractional bandwidth’ greater than 10 %;

3. Rated for operation at frequencies exceeding 16 GHz up to and including 31,8 GHz and with an average output power greater than 0,8 W (29 dBm) with a ‘fractional bandwidth’ greater than 10 %;

4. Rated for operation at frequencies exceeding 31,8 GHz up to and including 37,5 GHz;

5. Rated for operation at frequencies exceeding 37,5 GHz up to and including 43,5 GHz and with an average output power greater than 0,25 W (24 dBm) with a ‘fractional bandwidth’ greater than 10 %; or

6. Rated for operation at frequencies exceeding 43,5 GHz;

e. ‘Technology’ according to the General Technology Note for the ‘development’ or

‘production’ of electronic devices and circuits, specially designed for telecommunications and containing components manufactured from ‘superconductive’ materials, specially

designed for operation at temperatures below the ‘critical temperature’ of at least one of the ‘superconductive’ constituents and having any of the following:

1. Current switching for digital circuits using ‘superconductive’ gates with a product of delay time per gate (in seconds) and power dissipation per gate (in watts) of less than

10-14 J; or

2. Frequency selection at all frequencies using resonant circuits with Q-values exceeding

10,000.

5E002

‘Technology’ according to the General Technology Note for the ‘development’, ‘production’ or

‘use’ of equipment specified in 5A002, 5B002 or ‘software’ specified in 5D002.a. or 5D002.c.

VERŻJONI ELETTRONIKA

B 281

PART B

Article 6 applies to the following goods:

Item from Annex I to

Regulation (EC) No 428/2009

Description

0A001

‘Nuclear reactors’ and specially designed or prepared equipment and components therefor, as follows:

a. ‘Nuclear reactors’;

b. Metal vessels, or major shop-fabricated parts therefor, including the reactor vessel head for a reactor pressure vessel, specially designed or prepared to contain the core of a ‘nuclear reactor’;

c. Manipulative equipment specially designed or prepared for inserting or removing fuel in a

‘nuclear reactor’;

d. Control rods specially designed or prepared for the control of the fission process in a

‘nuclear reactor’, support or suspension structures therefor, rod drive mechanisms and rod guide tubes;

e. Pressure tubes specially designed or prepared to contain fuel elements and the primary coolant in a ‘nuclear reactor’ at an operating pressure in excess of 5,1 MPa;

f. Zirconium metal and alloys in the form of tubes or assemblies of tubes in which the ratio of hafnium to zirconium is less than 1:500 parts by weight, specially designed or prepared for use in a ‘nuclear reactor’;

g. Coolant pumps specially designed or prepared for circulating the primary coolant of

‘nuclear reactors’;

h. ‘Nuclear reactor internals’ specially designed or prepared for use in a ‘nuclear reactor’, including support columns for the core, fuel channels, thermal shields, baffles, core grid plates, and diffuser plates;

Note: In 0A001.h. ‘nuclear reactor internals’ means any major structure within a reactor vessel which has one or more functions such as supporting the core, maintaining fuel alignment, directing primary coolant flow, providing radiation shields for the reactor vessel, and guiding in-core instrumentation.

i. Heat exchangers (steam generators) specially designed or prepared for use in the primary coolant circuit of a ‘nuclear reactor’;

j. Neutron detection and measuring instruments specially designed or prepared for deter­

mining neutron flux levels within the core of a ‘nuclear reactor’.

0C002

Low enriched uranium covered by 0C002 when it is incorporated in assembled nuclear fuels elements

B 282 VERŻJONI ELETTRONIKA

ANNEX II

Goods and technology referred to in point (a) of Article 2(1), Articles 2(3) and 4, and points (b) and (d) ofArticle 5(1)

INTRODUCTORY NOTES

1. Unless otherwise stated, reference numbers used in the column entitled ‘Description’ refer to the descriptions of dual- use items and technology set out in Annex I to Regulation (EC) No 428/2009.

2. A reference number in the column entitled ‘Related item from Annex I to Regulation (EC) No 428/2009’ means that the characteristics of the item described in the column ‘Description’ lie outside the parameters set out in the description of the dual-use entry referred to.

3. Definitions of terms between ‘single quotation marks’ are given in a technical note to the relevant item.

4. Definitions of terms between “double quotation marks” can be found in Annex I to Regulation (EC) No 428/2009.

GENERAL NOTES

1. The object of the prohibitions contained in this Annex should not be defeated by the export of any non-prohibited goods (including plant) containing one or more prohibited components when the prohibited component or components are the principal element of the goods and can feasibly be removed or used for other purposes.

N.B.: In judging whether the prohibited component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the prohibited component or components as the principal element of the goods being procured.

2. The goods specified in this Annex include both new and used goods.

GENERAL TECHNOLOGY NOTE (GTN)

(To be read in conjunction with Section II.B.)

1. The sale, supply, transfer or export of ‘technology’ which is ‘required’ for the ‘development’, ‘production’ or ‘use’ of goods the sale, supply, transfer or export of which is prohibited in Part A (Goods) below, is prohibited in accordance with the provisions of Section II.B.

2. The ‘technology’ ‘required’ for the ‘development’, ‘production’ or ‘use’ of prohibited goods remains under prohibition even when applicable to non-prohibited goods.

3. Prohibitions do not apply to that ‘technology’ which is the minimum necessary for the installation, operation, main­ tenance (checking) and repair of those goods which are not prohibited or the export of which has been authorised in accordance with Regulation (EC) No 423/2007 or this Regulation.

4. Prohibitions on ‘technology’ transfer do not apply to information ‘in the public domain’, to ‘basic scientific research’ or to the minimum necessary information for patent applications.

II.A. GOODS

A0. Nuclear Materials, Facilities, and Equipment

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A0.001

Hollow cathode lamps as follows:

a. Iodine hollow cathode lamps with windows in pure silicon or quartz b. Uranium hollow cathode lamps

II.A0.002

Faraday isolators in the wavelength range 500 nm – 650 nm

II.A0.003

Optical gratings in the wavelength range 500 nm – 650 nm

VERŻJONI ELETTRONIKA

B 283

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A0.004

Optical fibres in the wavelength range 500 nm – 650 nm coated with anti- reflecting layers in the wavelength range 500 nm – 650 nm and having a core diameter greater than 0,4 mm but not exceeding 2 mm

II.A0.005

Nuclear reactor vessel components and testing equipment, other than those specified in 0A001, as follows:

1. Seals

2. Internal components

3. Sealing, testing and measurement equipment

0A001

II.A0.006

Nuclear detection systems for detection, identification or quantification of radioactive materials and radiation of nuclear origin and specially designed components thereof other than those specified in 0A001.j. or 1A004.c.

0A001.j

1A004.c

II.A0.007

Bellows-sealed valves made of aluminium alloy or stainless steel type 304,

304L or 316L.

Note: This item does not cover bellow valves defined in 0B001.c.6 and

2A226.

0B001.c.6

2A226

II.A0.008

Laser mirrors, other than those specified in 6A005.e, consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at 20 °C (e.g. fused silica or sapphire).

Note: This item does not cover optical systems specially designed for astro­

nomical applications, except if the mirrors contain fused silica.

0B001.g.5, 6A005.e

II.A0.009

Laser lenses, other than those specified in 6A005.e.2, consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at

20 °C (e.g. fused silica).

0B001.g, 6A005.e.2

II.A0.010

Pipes, piping, flanges, fittings made of, or lined with, nickel or nickel alloy containing more than 40 % nickel by weight, other than those specified in

2B350.h.1., in respect of pipes having an inner diameter smaller than

100 mm.

2B350

II.A0.012

Shielded enclosures for the manipulation, storage and handling of radio­

active substances (Hot cells).

0B006

II.A0.013

‘Natural uranium’ or ‘depleted uranium’ or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more of the foregoing, other than those specified in 0C001.

0C001

II.A0.014

Detonation chambers having a capacity of explosion absorption of more than 2,5 kg TNT equivalent.

A1. Materials, chemicals, ‘microorganisms’ and ‘toxins’

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A1.001

Bis(2-ethylhexyl) phosphoric acid (HDEHP or D2HPA) CAS 298-07-7 solvent in any quantity, with a purity greater than 90 %.

II.A1.002

Fluorine gas (Chemical Abstract Number (CAS): 7782-41-4), with a purity of at least 95 %.

B 284 VERŻJONI ELETTRONIKA

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A1.005

Electrolytic cells for fluorine production with an output capacity greater than

100 g of fluorine per hour.

Note: This item does not cover electrolytic cells defined in item 1B225.

1B225

II.A1.006

Catalysts, other than those prohibited by 1A225, containing platinum, palladium or rhodium, usable for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water.

1B231, 1A225

II.A1.007

Aluminium and its alloys, other than those specified in 1C002.b.4 or

1C202.a, in crude or semi-fabricated form having either of the following characteristics:

a. Capable of an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); or

b. Having a tensile strength of 415 MPa or more at 298 K (25 °C).

1C002.b.4, 1C202.a

II.A1.008

Magnetic metals, of all types and of whatever form, having an initial relative permeability of 120 000 or more and a thickness between 0,05 and

0,1 mm.

1C003.a

II.A1.009

‘Fibrous or filamentary materials’ or prepregs, as follows:

a. Carbon or aramid ‘fibrous or filamentary materials’ having either of the following characteristics:

1. A ‘specific modulus’ exceeding 10 × 106 m; or

2. A ‘specific tensile strength’ exceeding 17 × 104 m;

b. Glass ‘fibrous or filamentary materials’ having either of the following characteristics:

1. A ‘specific modulus’ exceeding 3,18 × 106 m; or

2. A ‘specific tensile strength’ exceeding 76,2 × 103 m;

c. Thermoset resin-impregnated continuous ‘yarns’, ‘rovings’, ‘tows’ or ‘tapes’ with a width of 15 mm or less (once prepregs), made from carbon or glass ‘fibrous or filamentary materials’ other than those specified in II.A1.010.a. or b.

Note: This item does not cover ‘fibrous or filamentary materials’ defined in items 1C010.a, 1C010.b, 1C210.a and 1C210.b.

1C010.a

1C010.b

1C210.a

1C210.b

II.A1.010

Resin-impregnated or pitch-impregnated fibres (prepregs), metal or carbon­

coated fibres (preforms) or ‘carbon fibre preforms’, as follows:

a. Made from ‘fibrous or filamentary materials’ specified in II.A1.009 above;

b. Epoxy resin ‘matrix’ impregnated carbon ‘fibrous or filamentary materials’ (prepregs), specified in 1C010.a, 1C010.b or 1C010.c, for the repair of aircraft structures or laminates, of which the size of individual sheets does not exceed 50 cm × 90 cm;

c. Prepregs specified in 1C010.a, 1C010.b or 1C010.c, when impregnated with phenolic or epoxy resins having a glass transition temperature (Tg) less than 433 K (160 °C) and a cure temperature lower than the glass transition temperature.

Note: This item does not cover ‘fibrous or filamentary materials’ defined in item 1C010.e.

1C010.e.

1C210

VERŻJONI ELETTRONIKA

B 285

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A1.011

Reinforced silicon carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps, usable in ‘missiles’, other than those specified in

1C107.

1C107

II.A1.012

Maraging steels, other than those specified in 1C116 or 1C216, ‘capable of’

an ultimate tensile strength of 2050 MPa or more, at 293 K (20 °C).

Technical Note:

The phrase ‘maraging steel capable of’ encompasses maraging steel before or after heat treatment.

1C216

II.A1.013

Tungsten, tantalum, tungsten carbide, tantalum carbide and alloys, having both of the following characteristics:

a. In forms having a hollow cylindrical or spherical symmetry (including cylinder segments) with an inside diameter between 50 mm and

300 mm; and

b. A mass greater than 5 kg.

Note: This item does not cover tungsten, tungsten carbide and alloys defined in item 1C226.

1C226

II.A1.014

Elemental powders of cobalt, neodymium or samarium or alloys or mixtures thereof containing at least 20 % by weight of cobalt, neodymium or samarium, with a particle size less than 200 μm.

II.A1.015

Pure tributyl phosphate (TBP) [CAS No 126-73-8] or any mixture having a

TBP content of more than 5 % by weight.

II.A1.016

Maraging steel, other than those prohibited by 1C116, 1C216 or II.A1.012

Technical Note:

Maraging steels are iron alloys generally characterised by high nickel, very low carbon content and the use of substitutional elements or precipitates to produce strengthening and age-hardening of the alloy.

II.A1.017

Metals, metal powders and material as follows:

a. Tungsten and tungsten alloys, other than those prohibited by 1C117, in the form of uniform spherical or atomized particles of 500 μm diameter or less with a tungsten content of 97 % by weight or more;

b. Molybdenum and molybdenum alloys, other than those prohibited by

1C117, in the form of uniform spherical or atomized particles of

500 μm diameter or less with a molybdenum content of 97 % by weight or more;

c. Tungsten materials in the solid form, other than those prohibited by

1C226, or II.A1.013 having material compositions as follows:

1. Tungsten and alloys containing 97 % by weight or more of tungsten;

2. Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or

3. Silver infiltrated tungsten containing 80 % by weight or more of tungsten.

II.A1.018

Soft magnetic alloys having a chemical composition as follows:

a) Iron content between 30 % and 60 %, and b) Cobalt content between 40 % and 60 %.

B 286 VERŻJONI ELETTRONIKA

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A1.019

‘Fibrous or filamentary materials’ or prepregs, not prohibited by Annex I or by Annex II (under II.A1.009, II.A1.010) of this Regulation, or not specified by Annex I of Regulation (EC) No 428/2009, as follows:

a) Carbon ‘fibrous or filamentary materials’;

Note: II.A1.019a. does not cover fabrics.

b) Thermoset resin-impregnated continuous ‘yarns’, ‘rovings’, ‘tows’, or

‘tapes’, made from carbon ‘fibrous or filamentary materials’;

c) Polyacrylonitrile (PAN) continuous ‘yarns’, ‘rovings’, ‘tows’ or ‘tapes’

A2. Materials Processing

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A2.001

Vibration test systems, equipment and components thereof, other than those specified in 2B116:

a. Vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at an acceleration equal to or greater than 0,1 g rms between 0,1 Hz and

2 kHz and imparting forces equal to or greater than 50 kN, measured

‘bare table’;

b. Digital controllers, combined with specially designed vibration test

‘software’, with a real-time bandwidth greater than 5 kHz designed for use with vibration test systems specified in a.;

c. Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force equal to or greater than 50 kN, measured

‘bare table’, and usable in vibration test systems specified in a.;

d. Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured ‘bare table’, and usable in vibration systems specified in a.

Technical Note:

‘Bare table’ means a flat table, or surface, with no fixture or fittings.

2B116

II.A2.002

Machine tools and components and numerical controls for machine tools, as follows:

a. Machine tools for grinding having positioning accuracies with ‘all compensations available’ equal to or less (better) than 15 μm according to ISO 230/2 (1988) (1) or national equivalents along any linear axis;

Note: This item does not cover machine tools for grinding defined in items 2B201.b and 2B001.c.

b. Components and numerical controls, specially designed for machine tools specified in 2B001, 2B201, or under a.

2B201.b

2B001.c

II.A2.003

Balancing machines and related equipment as follows:

a. Balancing machines, designed or modified for dental or other medical equipment, having all the following characteristics:

1. Not capable of balancing rotors/assemblies having a mass greater than

3 kg;

2. Capable of balancing rotors/assemblies at speeds greater than

12 500 rpm;

2B119

VERŻJONI ELETTRONIKA

B 287

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

3. Capable of correcting imbalance in two planes or more; and

4. Capable of balancing to a residual specific imbalance of 0,2 g × mm per kg of rotor mass;

b. Indicator heads designed or modified for use with machines specified in a. above.

Technical Note:

Indicator heads are sometimes known as balancing instrumentation.

II.A2.004

Remote manipulators that can be used to provide remote actions in radio­

chemical separation operations or hot cells, other than those specified in

2B225, having either of the following characteristics:

a. A capability of penetrating a hot cell wall of 0,3 m or more (through the wall operation); or

b. A capability of bridging over the top of a hot cell wall with a thickness of 0,3 m or more (over the wall operation).

2B225

II.A2.006

Oxidation furnaces capable of operation at temperatures above 400 °C

Note: This item does not cover tunnel kilns with roller or car conveyance, tunnel kilns with conveyor belt, pusher type kilns or shuttle kilns, specially designed for the production of glass, tableware ceramics or structural ceramics.

2B226

2B227

II.A2.007

‘Pressure transducers’, other than those defined in 2B230, capable of measuring absolute pressures at any point in the range 0 to 200 kPa and having both of the following characteristics:

a. Pressure sensing elements made of or protected by ‘Materials resistant to corrosion by uranium hexafluoride (UF6)’, and

b. Having either of the following characteristics:

1. A full scale of less than 200 kPa and an ‘accuracy’ of better than ± 1 %

of full scale; or

2. A full scale of 200 kPa or greater and an ‘accuracy’ of better than

2 kPa.

2B230

II.A2.011

Centrifugal separators, capable of continuous separation without the propa­

gation of aerosols and manufactured from:

1. Alloys with more than 25 % nickel and 20 % chromium by weight;

2. Fluoropolymers;

3. Glass (including vitrified or enamelled coating or glass lining);

4. Nickel or alloys with more than 40 % nickel by weight;

5. Tantalum or tantalum alloys;

6. Titanium or titanium alloys; or

7. Zirconium or zirconium alloys.

Note: This item does not cover centrifugal separators defined in item

2B352.c.

2B352.c

II.A2.012

Sintered metal filters made of nickel or nickel alloy with more than 40 %

nickel by weight.

Note: This item does not cover filters defined in item 2B352.d.

2B352.d

B 288 VERŻJONI ELETTRONIKA

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A2.013

Spin-forming machines and flow-forming machines, other than those controlled by 2B009, 2B109 or 2B209, having a roller force of more than 60 kN and specially designed components therefor.

Technical Note:

For the purpose of II.A2.013, machines combining the functions of spin- forming and flow-forming are regarded as flow-forming machines.

A3. Electronics

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A3.001

High voltage direct current power supplies having both of the following characteristics:

a. Capable of continuously producing, over a time period of eight hours,

10 kV or more, with output power of 5 kW or more with or without sweeping; and

b. Current or voltage stability better than 0,1 % over a time period of four hours.

Note: This item does not cover power supplies defined in items 0B001.j.5 and 3A227.

3A227

II.A3.002

Mass spectrometers, other than those specified in 3A233 or 0B002.g, capable of measuring ions of 200 atomic mass units or more and having a resolution of better than 2 parts in 200, as follows, and ion sources thereof:

a. Inductively coupled plasma mass spectrometers (ICP/MS);

b. Glow discharge mass spectrometers (GDMS);

c. Thermal ionisation mass spectrometers (TIMS);

d. Electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with ‘materials resistant to corrosion by uranium hexafluoride UF6’;

e. Molecular beam mass spectrometers having either of the following char­

acteristics:

1. A source chamber constructed from, lined with or plated with stainless steel or molybdenum and equipped with a cold trap capable of cooling to 193 K (– 80 °C) or less; or

2. A source chamber constructed from, lined with or plated with

‘materials resistant to corrosion by uranium hexafluoride (UF6)’;

f. Mass spectrometers equipped with a microfluorination ion source designed for actinides or actinide fluorides.

3A233

II.A3.003

Frequency changers or generators, other than those prohibited by 0B001 or

3A225, having all of the following characteristics, and specially designed components and software therefor:

a. Multiphase output capable of providing a power of 40 W or greater;

b. Capable of operating in the frequency range between 600 and 2 000 Hz;

and

c. Frequency control better (less) than 0,1 %.

Technical Note:

Frequency changers in II.A3.003 are also known as converters or inverters.

VERŻJONI ELETTRONIKA

A6. Sensors and Lasers

B 289

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A6.001

Yttrium aluminium garnet (YAG) rods

II.A6.002

Optical equipment and components, other than those specified in 6A002,

6A004.b as follows:

Infrared optics in the wavelength range 9 000 nm – 17 000 nm and components thereof, including cadmium telluride (CdTe) components.

6A002

6A004.b

II.A6.003

Wave front corrector systems for use with a laser beam having a diameter exceeding 4 mm, and specially designed components thereof, including control systems, phase front sensors and ‘deformable mirrors’ including bimorph mirrors.

Note: This item does not cover mirrors defined in 6A004.a, 6A005.e and

6A005.f.

6A003

II.A6.004

Argon ion ‘lasers’ having an average output power equal to or greater than

5 W.

Note: This item does not cover argon ion ‘lasers’ defined in items 0B001.g.5,

6A005 and 6A205.a.

6A005.a.6

6A205.a

II.A6.005

Semiconductor ‘lasers’ and components thereof, as follows:

a. Individual semiconductor ‘lasers’ with an output power greater than

200 mW each, in quantities larger than 100;

b. Semiconductor ‘laser’ arrays having an output power greater than 20 W.

Notes:

1. Semiconductor ‘lasers’ are commonly called ‘laser’ diodes.

2. This item does not cover ‘lasers’ defined in items 0B001.g.5, 0B001.h.6 and 6A005.b.

3. This item does not cover ‘laser’ diodes with a wavelength in the range

1 200 nm – 2 000 nm.

6A005.b

II.A6.006

Tunable semiconductor ‘lasers’ and tunable semiconductor ‘laser’ arrays, of a wavelength between 9 μm and 17 μm, as well as array stacks of semicon­ ductor ‘lasers’ containing at least one tunable semiconductor ‘laser’ array of such wavelength.

Notes:

1. Semiconductor ‘lasers’ are commonly called ‘laser’ diodes.

2. This item does not cover semiconductor ‘lasers’ defined in items

0B001.h.6 and 6A005.b

6A005.b

II.A6.007

Solid state ‘tunable’ ‘lasers’ and specially designed components thereof as follows:

a. Titanium-sapphire lasers, b. Alexandrite lasers.

Note: This item does not cover titanium-sapphire and alexandrite lasers defined in items 0B001.g.5, 0B001.h.6 and 6A005.c.1.

6A005.c.1

II.A6.008

Neodymium-doped (other than glass) ‘lasers’, having an output wavelength greater than 1 000 nm but not exceeding 1 100 nm and output energy exceeding 10 J per pulse.

Note: This item does not cover neodymium-doped (other than glass) ‘lasers’

defined in item 6A005.c.2.b.

6A005.c.2

B 290 VERŻJONI ELETTRONIKA

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A6.009

Components of acousto-optics, as follows:

a. Framing tubes and solid-state imaging devices having a recurrence frequency equal to or exceeding 1 kHz;

b. Recurrence frequency supplies;

c. Pockels cells.

6A203.b.4.c

II.A6.010

Radiation-hardened cameras, or lenses thereof, other than those specified in

6A203.c., specially designed, or rated as radiation-hardened, to withstand a total radiation dose greater than 50 × 103 Gy(silicon) (5 × 106 rad (silicon)) without operational degradation.

Technical Note:

The term Gy(silicon) refers to the energy in Joules per kilogram absorbed by an unshielded silicon sample when exposed to ionising radiation.

6A203.c

II.A6.011

Tunable pulsed dye laser amplifiers and oscillators, having all of the following characteristics:

1. Operating at wavelengths between 300 nm and 800 nm;

2. An average output power greater than 10 W but not exceeding 30 W;

3. A repetition rate greater than 1 kHz; and

4. Pulse width less than 100 ns.

Notes:

1. This item does not cover single mode oscillators.

2. This item does not cover tunable pulsed dye laser amplifiers and oscillators defined in item 6A205.c, 0B001.g.5 and 6A005.

6A205.c

II.A6.012

Pulsed carbon dioxide ‘lasers’ having all of the following characteristics:

1. Operating at wavelengths between 9 000 nm and 11 000 nm;

2. A repetition rate greater than 250 Hz;

3. An average output power greater than 100 W but not exceeding 500 W;

and

4. Pulse width less than 200 ns.

Note: This item does not cover pulsed carbon dioxide laser amplifiers and oscillators defined in item 6A205.d., 0B001.h.6. and 6A005.d.

6A205.d

A7. Navigation and Avionics

No

Description

3Related item from Annex I

to Regulation (EC) No 428/2009

II.A7.001

Inertial navigation systems and specially designed components thereof, as follows:

I. Inertial navigation systems which are certified for use on ‘civil aircraft’ by civil authorities of a State participating in the Wassenaar Arrangement, and specially designed components thereof, as follows:

a. Inertial navigation systems (INS) (gimballed or strapdown) and inertial equipment designed for ‘aircraft’, land vehicle, vessels (surface or underwater) or ‘spacecraft’ for attitude, guidance or control, having any of the following characteristics, and specially designed components thereof:

1. Navigation error (free inertial) subsequent to normal alignment of

0,8 nautical mile per hour (nm/hr) ‘Circular Error Probable’ (CEP)

or less (better); or

7A003

7A103

VERŻJONI ELETTRONIKA

B 291

No

Description

3Related item from Annex I

to Regulation (EC) No 428/2009

2. Specified to function at linear acceleration levels exceeding 10 g;

b. Hybrid Inertial Navigation Systems embedded with Global Navigation Satellite Systems(s) (GNSS) or with ‘Data-Based Referenced Navi­ gation’ (‘DBRN’) System(s) for attitude, guidance or control, subsequent to normal alignment, having an INS navigation position accuracy, after loss of GNSS or ‘DBRN’ for a period of up to four minutes, of less (better) than 10 metres ‘Circular Error Probable’ (CEP);

c. Inertial Equipment for Azimuth, Heading, or North Pointing having any of the following characteristics, and specially designed components thereof:

1. Designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc/minutes RMS at 45 degrees latitude; or

2. Designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec.

Note: The parameters of I.a. and I.b. are applicable with any of the following environmental conditions:

1. Input random vibration with an overall magnitude of 7,7 g rms in the first half hour and a total test duration of one and a half hours per axis in each of the three perpendicular axes, when the random vibration meets the following:

a. A constant power spectral density (PSD) value of 0,04 g2/ Hz over a frequency interval of 15 to 1 000 Hz; and

b. The PSD attenuates with a frequency from 0,04 g2/Hz to

0,01 g2/Hz over a frequency interval from 1 000 to

2 000 Hz;

2. A roll and yaw rate equal to or greater than + 2,62 radian/s

(150 deg/s); or

3. According to national standards equivalent to 1. or 2. above.

Technical Notes:

1. I.b. refers to systems in which an INS and other independent navigation aids are built into a single unit (embedded) in order to achieve improved performance.

2. ‘Circular Error Probable’ (CEP) – In a circular normal distribution, the radius of the circle containing 50 percent of the individual measurements being made, or the radius of the circle within which there is a 50 percent probability of being located.

II. Theodolite systems incorporating inertial equipment specially designed for civil surveying purposes and designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude, and specially designed components thereof.

III. Inertial or other equipment using accelerometers specified in 7A001 or

7A101, where such accelerometers are specially designed and developed as MWD (Measurement While Drilling) sensors for use in downhole well

services operations.

B 292 VERŻJONI ELETTRONIKA

A9. Aerospace and Propulsion

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.A9.001

Explosive bolts.

II.B. TECHNOLOGY

No

Description

Related item from Annex I

to Regulation (EC) No 428/2009

II.B.001

Technology required for the development, production, or use of the items in

Part II.A. (Goods) above.

II.B.002

Technology required for the development or production of the items in Part

IV A. (Goods) of Annex IV.

Technical Note:

The term ‘technology’ includes software.

VERŻJONI ELETTRONIKA

ANNEX III

B 293

List of equipment which might be used for internal repression as referred to in point (b) of Article 2(1), point (c)of Article 5(1) and point (e) of Article 5(1)

1. Fire-arms, ammunition and related accessories therefor, as follows:

1.1 Firearms not controlled by ML 1 and ML 2 of the Common Military List of the European Union (‘Common

Military List’) (1);

1.2 Ammunition specially designed for the firearms listed in item 1.1 and specially designed components therefor;

1.3 Weapon-sights not controlled by the Common Military List.

2. Bombs and grenades not controlled by the Common Military List.

3. Vehicles as follows:

3.1 Vehicles equipped with a water cannon, specially designed or modified for the purpose of riot control;

3.2 Vehicles specially designed or modified to be electrified to repel borders;

3.3 Vehicles specially designed or modified to remove barricades, including construction equipment with ballistic protection;

3.4 Vehicles specially designed for the transport or transfer of prisoners and/or detainees;

3.5 Vehicles specially designed to deploy mobile barriers;

3.6 Components for the vehicles specified in items 3.1 to 3.5 specially designed for the purposes of riot control.

Note 1 This item does not control vehicles specially designed for the purposes of fire-fighting.

Note 2 For the purposes of item 3.5 the term ‘vehicles’ includes trailers.

4. Explosive substances and related equipment as follows:

4.1 Equipment and devices specially designed to initiate explosions by electrical or non-electrical means, including firing sets, detonators, igniters, boosters and detonating cord, and specially designed components therefor; except those specially designed for a specific commercial use consisting of the actuation or operation by explosive means of other equipment or devices the function of which is not the creation of explosions (e.g., car air-bag inflaters, electric-surge arresters of fire sprinkler actuators);

4.2 Linear cutting explosive charges not controlled by the Common Military List;

4.3 Other explosives not controlled by the Common Military List and related substances as follows:

a. amatol;

b. nitrocellulose (containing more than 12,5 % nitrogen);

c. nitroglycol;

d. pentaerythritol tetranitrate (PETN);

e. picryl chloride;

f. 2,4,6-trinitrotoluene (TNT).

(1) OJ L 88, 29.3.2007, p. 58.

B 294 VERŻJONI ELETTRONIKA

5. Protective equipment not controlled by ML 13 of the Common Military List as follows:

5.1 Body armour providing ballistic and/or stabbing protection;

5.2 Helmets providing ballistic and/or fragmentation protection, anti-riot helmets, antiriot shields and ballistic shields.

Note: This item does not control:

— equipment specially designed for sports activities;

— equipment specially designed for safety of work requirements.

6. Simulators, other than those controlled by ML 14 of the Common Military List, for training in the use of firearms, and specially designed software therefor.

7. Night vision, thermal imaging equipment and image intensifier tubes, other than those controlled by the Common

Military List.

8. Razor barbed wire.

9. Military knives, combat knives and bayonets with blade lengths in excess of 10 cm.

10. Production equipment specially designed for the items specified in this list.

11. Specific technology for the development, production or use of the items specified in this list.

VERŻJONI ELETTRONIKA

ANNEX IV

Goods and technology referred to in Articles 3 and 5(2)

INTRODUCTORY NOTES

B 295

1. Unless otherwise stated, reference numbers used in the column below entitled ‘Description’ refer to the descriptions of dual use items and technology set out in Annex I to Regulation (EC) No 428/2009.

2. A reference number in the column below entitled ‘Related item from Annex I to Regulation (EC) No 428/2009’ means that the characteristics of the item described in the ‘Description’ column lie outside the parameters set out in the description of the dual use entry referred to.

3. Definitions of terms between ‘single quotation marks’ are given in a technical note to the relevant item.

4. Definitions of terms between “double quotation marks” can be found in Annex I to Regulation (EC) No 428/2009.

GENERAL NOTES

1. The object of the controls contained in this Annex should not be defeated by the export of any non-controlled goods (including plant) containing one or more controlled components when the controlled component or components is/are the principal element of the goods and can feasibly be removed or used for other purposes.

N.B.: In judging whether the controlled component or components is/are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the controlled component or components as the principal element of the goods being procured.

2. The goods specified in this Annex include both new and used goods.

GENERAL TECHNOLOGY NOTE (GTN) (To be read in conjunction with Section IV.B)

1. The sale, supply, transfer or export of ‘technology’ which is ‘required’ for the ‘development’, ‘production’ or ‘use’ of goods the sale, supply, transfer or export of which is controlled in Part A (Goods) below, is controlled in accordance with the provisions of Section IV.B.

2. The ‘technology’ ‘required’ for the ‘development’, ‘production’ or ‘use’ of goods under control remains under control even when it is applicable to non-controlled goods.

3. Controls do not apply to that ‘technology’ which is the minimum necessary for the installation, operation, main­ tenance (checking) and repair of those goods which are not controlled or the export of which has been authorised in accordance with Regulation (EC) No 423/2007 or This Regulation.

4. Controls on ‘technology’ transfer do not apply to information ‘in the public domain’, to ‘basic scientific research’ or to the minimum necessary information for patent applications.

B 296 VERŻJONI ELETTRONIKA

IV.A. GOODSA0. Nuclear Materials, Facilities, and Equipment

No

Description

Related item from Annex I

to Regulation

(EC) No 428/2009

IV.A0.010

Pipes, piping, flanges, fittings made of, or lined with, nickel or nickel alloy containing more than 40 % nickel by weight, other than those specified in

2B350.h.1., in respect of pipes having an inner diameter larger than 100 mm.

2B350

IV.A0.011

Vacuum pumps other than those specified in 0B002.f.2 or 2B231, as follows: Turbomolecular pumps having a flowrate equal to or greater than 400 l/s, Roots type vacuum roughing pumps having a volumetric aspiration flowrate

greater than 200 m3/h.

Bellows-sealed, scroll, dry compressor, and bellows-sealed, scroll, dry vacuum pumps.

0B002.f.2, 2B231

A1. Materials, chemicals, ‘micro-organisms’ and ‘toxins’

No

Description

Related item from Annex I

to Regulation

(EC) No 428/2009

IV.A1.003

Ring-shaped seals and gaskets, having an inner diameter of 400 mm or less, made of any of the following materials:

a. Copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching;

b. Fluorinated polyimides containing 10 % by weight or more of combined fluorine;

c. Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine;

d. Polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®);

e. Fluoro-elastomers (e.g., Viton ®, Tecnoflon ®);

f. Polytetrafluoroethylene (PTFE).

IV.A1.004

Personal equipment for detecting radiation of nuclear origin, including personal dosimeters.

Note: This item does not cover nuclear detection systems defined in item 1A004.c.

1A004.c

VERŻJONI ELETTRONIKA

B 297

A2. Materials Processing

No

Description

Related item from Annex I

to Regulation

(EC) No 428/2009

IV.A2.005

Controlled atmosphere heat treatment furnaces, as follows: Furnaces capable of operation at temperatures above 400 °C.

2B226

2B227

IV.A2.008

Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:

1. Alloys with more than 25 % nickel and 20 % chromium by weight;

2. Fluoropolymers;

3. Glass (including vitrified or enamelled coating or glass lining);

4. Graphite or ‘carbon graphite’;

5. Nickel or alloys with more than 40 % nickel by weight;

6. Tantalum or tantalum alloys;

7. Titanium or titanium alloys;

8. Zirconium or zirconium alloys; or

9. Stainless steel.

Technical Note:

‘Carbon graphite’ is a composition consisting of amorphous carbon and graphite, in which the graphite content is 8 % or more by weight.

2B350.e

IV.A2.009

Industrial equipment and components, other than those specified in 2B350.d, as follows:

Heat exchangers or condensers with a heat transfer surface area greater than

0,05 m2, and less than 30 m2; and tubes, plates, coils or blocks (cores)

designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from any of the following materials:

1. Alloys with more than 25 % nickel and 20 % chromium by weight;

2. Fluoropolymers;

3. Glass (including vitrified or enamelled coating or glass lining);

4. Graphite or ‘carbon graphite’;

5. Nickel or alloys with more than 40 % nickel by weight;

6. Tantalum or tantalum alloys;

7. Titanium or titanium alloys;

8. Zirconium or zirconium alloys;

9. Silicon carbide;

10. Titanium carbide; or

11. Stainless steel.

Note: This item does not cover vehicle radiators.

Technical Note:

The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger.

2B350.d

B 298 VERŻJONI ELETTRONIKA

No

Description

Related item from Annex I

to Regulation

(EC) No 428/2009

IV.A2.010

Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, with manufacturer's specified maximum flow- rate greater than 0,6 m3/hour, or vacuum pumps with manufacturer's specified maximum flow-rate greater than 5 m3/hour [measured under standard temperature (273 K or 0 °C) and pressure (101,3 k Pa) conditions]; and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:

1. Alloys with more than 25 % nickel and 20 % chromium by weight;

2. Ceramics;

3. Ferrosilicon;

4. Fluoropolymers;

5. Glass (including vitrified or enamelled coatings or glass lining);

6. Graphite or ‘carbon graphite’;

7. Nickel or alloys with more than 40 % nickel by weight;

8. Tantalum or tantalum alloys;

9. Titanium or titanium alloys;

10. Zirconium or zirconium alloys;

11. Niobium (columbium) or niobium alloys;

12. Stainless steel; or

13. Aluminium alloys.

Technical Note:

The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the pump.

2B350.d

A3. Electronics

No

Description

Related item from Annex I

to Regulation

(EC) No 428/2009

IV.A3.004

Spectrometers and diffractometers, designed for the indicative test or quanti­ tative analysis of the elemental composition of metals or alloys without chemical decomposition of the material.

IV.B. TECHNOLOGY

No

Description

Related item from Annex I

to Regulation

(EC) No 428/2009

IV.B.001

Technology required for the use of the items in Part IV.A. (Goods) above.

Technical Note:

The term ‘technology’ includes software.

VERŻJONI ELETTRONIKA

ANNEX V

B 299

Web sites for information on the competent authorities referred to in Articles 3(5) and (6), 5(3), 7(1), 10, 12(2),13, 17, 18, 19(1) and (2), 21(1) and (4), 22(1), 23(1), 31(1) and 38(1), and address for notifications to theEuropean Commission

BELGIUM

http://www.diplomatie.be/eusanctions

BULGARIA

http://www.mfa.government.bg

CZECH REPUBLIC

http://www.mfcr.cz/mezinarodnisankce

DENMARK

http://www.um.dk/da/menu/Udenrigspolitik/FredSikkerhedOgInternationalRetsorden/Sanktioner/

GERMANY

http://www.bmwi.de/BMWi/Navigation/Aussenwirtschaft/Aussenwirtschaftsrecht/embargos.html

ESTONIA

http://www.vm.ee/est/kat_622/

IRELAND

http://www.dfa.ie/home/index.aspx?id=28519

GREECE

http://www.ypex.gov.gr/www.mfa.gr/en-US/Policy/Multilateral+Diplomacy/International+Sanctions/

SPAIN

http://www.maec.es/es/MenuPpal/Asuntos/Sanciones%20Internacionales/Paginas/Sanciones_%20Internacionales.aspx

FRANCE

http://www.diplomatie.gouv.fr/autorites-sanctions/

ITALY

http://www.esteri.it/UE/deroghe.html

CYPRUS

http://www.mfa.gov.cy/sanctions

LATVIA

http://www.mfa.gov.lv/en/security/4539

LITHUANIA

http://www.urm.lt

LUXEMBOURG

http://www.mae.lu/sanctions

HUNGARY

http://www.kulugyminiszterium.hu/kum/hu/bal/Kulpolitikank/nemzetkozi_szankciok/

B 300 VERŻJONI ELETTRONIKA

MALTA

http://www.doi.gov.mt/EN/bodies/boards/sanctions_monitoring.asp

NETHERLANDS

http://www.minbuza.nl/sancties

AUSTRIA

http://www.bmeia.gv.at/view.php3?f_id=12750&LNG=en&version=

POLAND

http://www.msz.gov.pl

PORTUGAL

http://www.min-nestrangeiros.pt

ROMANIA

http://www.mae.ro/index.php?unde=doc&id=32311&idlnk=1&cat=3

SLOVENIA

http://www.mzz.gov.si/si/zunanja_politika/mednarodna_varnost/omejevalni_ukrepi/

SLOVAKIA

http://www.foreign.gov.sk

FINLAND

http://formin.finland.fi/kvyhteistyo/pakotteet

SWEDEN

http://www.ud.se/sanktioner

UNITED KINGDOM

www.fco.gov.uk/competentauthorities

Address for notifications to the European Commission:

European Commission

DG External Relations

Directorate A Crisis Platform — Policy Coordination in Common Foreign and Security Policy (CFSP) Unit A.2. Crisis Response and Peace Building

CHAR 12/106

B-1049 Bruxelles/Brussel (Belgium)

E-mail: relex-sanctions@ec.europa.eu

Tel.: (32-2) 295 55 85

Fax: (32-2) 299 08 73

VERŻJONI ELETTRONIKA

ANNEX VI

List of key equipment and technology referred to in Article 8

GENERAL NOTES

B 301

1. The object of the prohibitions contained in this Annex should not be defeated by the export of any non-prohibited goods (including plant) containing one or more prohibited components when the prohibited component or components are the principal element of the goods and can feasibly be removed or used for other purposes.

N.B.: In judging whether the prohibited component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the prohibited component or components as the principal element of the goods being procured.

2. The goods specified in this Annex include both new and used goods.

3. Definitions of terms between ‘single quotation marks’ are given in a technical note to the relevant item.

4. Definitions of terms between “double quotation marks” can be found in Annex I to Regulation (EC) No 428/2009.

GENERAL TECHNOLOGY NOTE (GTN)

1. The ‘technology’ ‘required’ for the ‘development’, ‘production’ or ‘use’ of prohibited goods remains under prohibition even when applicable to non-prohibited goods.

2. Prohibitions do not apply to that ‘technology’ which is the minimum necessary for the installation, operation, main­ tenance (checking) and repair of those goods which are not prohibited or the export of which has been authorised in accordance with Regulation (EC) No 423/2007 or this Regulation.

3. Prohibitions on ‘technology’ transfer do not apply to information ‘in the public domain’, to ‘basic scientific research’ or to the minimum necessary information for patent applications.

EXPLORATION AND PRODUCTION OF CRUDE OIL AND NATURAL GAS

1.A Equipment

1. Geophysical survey equipment, vehicles, vessels and aircraft specially designed or adapted to acquire data for oil and gas exploration and specially designed components therefor.

2. Sensors specially designed for downhole well operations in oil and gas wells, including sensors used for measurement whilst drilling and the associated equipment specially designed to acquire and store data from such sensors.

3. Drilling equipment designed to drill rock formations, specifically for the purpose of exploring for, or producing oil, gas and other naturally occurring, hydrocarbon materials.

4. Drill bits, drill pipes, drill collars, centralisers and other equipment, specially designed for use in and with oil and gas well drilling equipment.

5. Drilling wellheads, ‘blowout preventers’ and ‘Christmas or production trees’ and the specially designed components thereof, meeting the ‘API and ISO specifications’ for use with oil and gas wells.

Technical Notes:

a. A ‘blowout preventer’ is a device typically used at ground level (or if drilling underwater, at the seabed) during drilling to prevent the uncontrolled escape of oil and/or gas from the well.

b. A ‘Christmas tree or production tree’ is a device typically used to control flow of fluids from the well when it is complete and oil and/or gas production has started.

B 302 VERŻJONI ELETTRONIKA

c. For the purpose of this item, ‘API and ISO specifications’refers to the American Petroleum Institute specifications 6A, 16A,

17D and 11IW and/or the International Standards Organisation specifications 10423 and 13533 for blowout preventers, wellhead and Christmas trees for use on oil and/or gas wells.

6. Drilling and production platforms for crude oil and natural gas.

7. Vessels and barges incorporating drilling and/or petroleum processing equipment used for producing oil, gas and other naturally occurring flammable materials.

8. Liquid/gas separators meeting API specification 12J, specially designed to process the production from an oil or gas well, to separate the petroleum liquids from any water and any gas from the liquids.

9. Gas compressor with a design pressure of 40 bar (PN 40 and/or ANSI 300) or more and having a suction volume capacity of 300 000 Nm3/h or more, for the initial processing and transmission of natural gas, excluded gas compressors for CNG (Compressed Natural Gas) filling stations, and specially designed components therefor.

10. Subsea production control equipment and the components thereof meeting ‘API and ISO specifications’ for use with oil and gas wells.

Technical Note:

For the purposes of this entry, ‘API and ISO specifications’ refers to the American Petroleum Institute specification 17 F and/or the International Standards Organisation specification 13268 for subsea production control systems.

11. Pumps, typically high capacity and/or high pressure (in excess of 0.3 m3 per minute and/or 40 bar), specially designed to pump drilling muds and/or cement into oil and gas wells.

1.B Test and inspection equipment

1. Equipment specially designed for sampling, testing and analysing the properties of drilling mud, oil well cements and other materials specially designed and/or formulated for use in oil and gas wells.

2. Equipment specially designed for sampling, testing and analysing the properties of rock samples, liquid and gaseous samples and other materials taken from an oil and/or gas well either during or after drilling, or from the initial processing facilities attached thereto.

3. Equipment specially designed for collecting and interpreting information about the physical and mechanical condition of an oil and/or gas well, and for determining the in situ properties of the rock and reservoir formation.

1.C Materials

1. Drilling mud, drilling mud additives and the components thereof, specially formulated to stabilise oil and gas wells during drilling, to recover drill cuttings to the surface and to lubricate and cool the drilling equipment in the well.

2. Cements and other materials meeting the ‘API and ISO specifications’ for use in oil and gas wells.

Technical Note:

‘API and ISO specification’ refers to the American Petroleum Institute specification 10A or the International Standards Organi­ sation specification 10426 for oil well cements and other materials specially formulated for use in the cementing of oil and gas wells.

3. Corrosion inhibiting, emulsion treatment, defoaming agents and other chemicals specially formulated to be used in the drilling for, and the initial processing of, petroleum produced from an oil and/or gas well.

1.D Software

1. ‘Software’ specially designed to collect and interpret data acquired from seismic, electromagnetic, magnetic or gravity surveys for the purpose of establishing oil or gas prospectivity.

VERŻJONI ELETTRONIKA

B 303

2. ‘Software’ specially designed for storing, analysing and interpreting information acquired during drilling and production to assess the physical characteristics and behaviour of oil or gas reservoirs.

3. ‘Software’ specially designed for the ‘use’ of petroleum production and processing facilities or specific sub-units of such facilities.

1.E Technology

1. ‘Technology’ ‘required’ for the ‘development’, ‘production’ and ‘use’ of equipment specified in 1.A.01 – 1.A.11.

REFINING OF CRUDE OIL AND LIQUEFACTION OF NATURAL GAS

2.A Equipment

1. Heat exchangers as follows and specially designed components therefor:

a. Plate-fin heat exchangers with a surface/volume ratio greater than 500 m2/m3, specially designed for pre-cooling of natural gas;

b. Coil-wound heat exchangers specially designed for liquefaction or sub-cooling of natural gas.

2. Cryogenic pumps for the transport of media at a temperature – 120 °C having a transport capacity of more than

500 m3/h and specially designed components therefor.

3. ‘Coldbox’ and ‘coldbox’ equipment not specified by 2.A.1.

Technical Note:

‘Coldbox’ equipment’ refers to a specially designed construction, which is specific for LNG plants and incorporates the process stage of liquefaction. The ‘coldbox’ comprises heat exchangers, piping, other instrumentation and thermal insulators. The temperature inside the ‘coldbox’ is below – 120 °C (conditions for condensation of natural gas). The function of the ‘coldbox’ is the thermal insulation of the above described equipment.

4. Equipment for shipping terminals of liquefied gases having a temperature below – 120 °C and specially designed components therefor.

5. Flexible and non-flexible transfer line having a diameter greater than 50 mm for the transport of media below – 120 °C.

6. Maritime vessels specially designed for the transport of LNG.

7. Electrostatic desalters specially designed to remove contaminants such as salts, solids and water from crude oil and specially designed components therefor.

8. All crackers, including hydrocrackers, and cokers, specially designed for conversion of vacuum gas oils or vacuum residuum, and specially designed components therefor.

9. Hydrotreaters specially designed for desulphurisation of gasoline, diesel cuts and kerosene and specially designed components therefor.

10. Catalytic reformers specially designed for conversion of desulphurised gasoline into high-octane gasoline, and specially designed components therefor.

11. Refinery units for C5-C6 cuts isomerisation, and refinery units for alkylation of light olefins, to improve the octane index of the hydrocarbon cuts.

12. Pumps specially designed for the transport of crude oil and fuels, having a capacity of 50 m3/h or more and specially designed components therefor.

B 304 VERŻJONI ELETTRONIKA

13. Tubes with an outer diameter of 0,2 m or more and made from any of the following materials:

a. Stainless steels with 23 % chromium or more by weight;

b. Stainless steels and nickel bases alloys with a ‘Pitting resistance equivalent’ number higher than 33.

Technical Note:

‘Pitting resistance equivalent’ (PRE) number characterises the corrosion resistance of stainless steels and nickel alloys to pitting or crevice corrosion. The pitting resistance of stainless steels and nickel alloys is primarily determined by their compositions, primarily: chromium, molybdenum, and nitrogen. The formula to calculate the PRE number is: PRE = Cr + 3,3 % Mo + 30 % N

14. ‘Pigs’ (Pipeline Inspection Gauge(s)) and specially designed components therefor

Technical Note:

‘Pig’ is a device typically used for cleaning or inspection of a pipeline from inside (corrosion state or crack formation) and is propelled by the pressure of the product in the pipeline.

15. Pig launchers and pig catchers for the integration or removing of pigs.

16. Tanks for the storage of crude oil and fuels with a volume greater than 1 000 m3 (1 000 000 litres) as follows, and specially designed components therefor:

a. fixed roof tanks;

b. floating roof tanks.

17. Subsea flexible pipes specially designed for the transportation of hydrocarbons and injection fluids, water or gas, having a diameter greater than 50 mm.

18. Flexible pipes used for high pressure for topside and subsea application.

19. Isomeration equipment specially designed for production of high-octane gasoline based on light hydrocarbons as feed, and specially designed components therefor.

2.B Test and inspection equipment

1. Equipment specially designed for testing and analysing of quality (properties) of crude oil and fuels.

2. Interface control systems specially designed for controlling and optimising of the desalting process.

2.C Materials

1. Diethyleneglycol (CAS 111-46-6), Triethylene glycol (CAS 112-27-6)

2. N-Methylpyrrolidon (CAS 872-50-4), Sulfolane (CAS 126-33-0)

3. Zeolites, of natural or synthetic origin, specially designed for fluid catalytic cracking or for the purification and/or dehydration of gases, including natural gases.

4. Catalysts for the cracking and conversion of hydrocarbons as follows:

a. Single metal (platinum group) on alumina type or on zeolite, specially designed for catalytic reforming process;

b. Mixed metal species (platinum in combination with other noble metals) on alumina type or on zeolite, specially designed for catalytic reforming process;

VERŻJONI ELETTRONIKA

B 305

c. Cobalt and nickel catalysts doped with molybdenum on alumina type or on zeolite, specially designed for catalytic desulphurisation process;

d. Palladium, nickel, chromium and tungsten catalysts on alumina type or on zeolite, specially designed for catalytic hydrocracking process.

5. Gasoline additives specially formulated for increasing the octane number of gasoline.

Note:

This entry includes Ethyl tertiary butyl ether(ETBE) (CAS 637-92-3) and Methyl tertiary butyl ether (MTBE) CAS 1634-04-4).

2.D Software

1. ‘Software’ specially designed for the ‘use’ of LNG plants or specific sub-units of such plants.

2. ‘Software’ specially designed for the ‘development’, ‘production’ or ‘use’ of plants (including their sub-units) for oil refining.

2.E Technology

1. ‘Technology’ for the conditioning and purification of raw natural gas (dehydration, sweetening, removal of impurities).

2. ‘Technology’ for the liquefaction of natural gas, including ‘technology’ required for the ‘development’, ‘production’ or

‘use’ of LNG plants.

3. ‘Technology’ for the shipment of liquefied natural gas.

4. ‘Technology’ ‘required’ for the ‘development’, ‘production’ or ‘use’ of maritime vessels specially designed for the transport of liquefied natural gas.

5. ‘Technology’ for storage of crude oil and fuels.

6. ‘Technology’ ‘required’ for the ‘development’, ‘production’ or ‘use’ of a refinery plant, such as:

6.1. ‘Technology’ for conversion of light olefin to gasoline;

6.2. Catalytic reforming and isomerisation technology;

6.3. Catalytic and thermal cracking technology.

B 306 VERŻJONI ELETTRONIKA

ANNEX VII

List of persons, entities and bodies referred to in Article 16(1)

A. Legal persons, entities and bodies

Name

Identifying information

Reasons

Date of listing

1.

Abzar Boresh Kaveh Co. (alias

BK Co.)

Involved in the production of centrifuge components.

Date of UN

designation:

3.3.2008

2.

Amin Industrial Complex (alias (a) Amin Industrial­ Compound, (b) Amin Industrial Company)

Address:

(a) P.O. Box 91735-549, Mashad, Iran;

(b) Amin Industrial Estate, Khalage Rd., Seyedi District, Mashad, Iran;

(c) Kaveh Complex, Khalaj Rd., Seyedi St., Mashad, Iran.

(a) Amin Industrial Complex sought temperature controllers which may be used in nuclear research and operational/production facilities;

(b) Amin Industrial Complex is owned or controlled by, or acts on behalf of, the Defense Industries Organ­ ization (DIO), which was designated in UN Security Council Resolution 1737 (2006).

Date of UN

designation:

9.6.2010

3.

Ammunition and Metallurgy Industries Group (alias (a) AMIG, (b) Ammunition Industries Group)

(a) AMIG controls 7th of Tir; (b) AMIG is owned and

controlled by the Defence Industries Organisation (DIO).

Date of UN

designation:

4.3.2007

4.

Armament Industries Group

Address:

(a) Sepah Islam Road, Karaj

Special Road Km 10, Iran;

(b) Pasdaran Ave., P.O. Box

19585/777, Tehran, Iran.

(a) Armament Industries Group (AIG) manufacturers and services a variety of small arms and light weapons, including large- and medium-calibre guns and related technology;

(b) AIG conducts the majority of its procurement activity through Hadid Industries

Complex.

Date of EU

designation:

24.4.2007

(UN: 9.6.2010)

5.

Atomic Energy Organization of Iran (AEOI)

Involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006

6.

Bank Sepah and Bank Sepah

International

Bank Sepah provides support for the Aerospace Industries Organisation (AIO) and subor­ dinates, including Shahid Hemmat Industrial Group (SHIG) and Shahid Bagheri Industrial Group (SBIG).

Date of UN

designation:

24.3.2007

7.

Barzagani Tejarat Tavanmad

Saccal companies

(a) subsidiary of Saccal System companies;

(b) this company tried to

purchase sensitive goods for an entity listed in resolution 1737 (2006).

Date of UN

designation:

3.3.2008

VERŻJONI ELETTRONIKA

B 307

Name

Identifying information

Reasons

Date of listing

8.

Cruise Missile Industry Group (alias Naval Defence Missile Industry Group)

Date of UN

designation:

24.3.2007

9.

Defence Industries Organi­

sation (DIO)

(a) Overarching MODAFL- controlled entity, some of whose subordinates have been involved in the centrifuge programme making components, and in the missile programme;

(b) Involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006

10.

Defense Technology and

Science Research Center

Address:

Pasdaran Ave, PO Box

19585/777, Tehran, Iran.

Defense Technology and Science Research Center (DTSRC) is owned or controlled by, or acts on behalf of, Iran's Ministry of Defense and Armed Forces Logistics (MODAFL), which oversees Iran's defence R&D, production, maintenance, exports, and procurement.

Date of EU

designation:

24.4.2007

(UN: 9.6.2010)

11.

Doostan International

Company

Doostan International Company (DICO) supplies elements to Iran's ballistic missile program.

Date of UN

designation:

9.6.2010

12.

Electro Sanam Company (alias

(a) E. S. Co., (b) E. X. Co.)

AIO front-company, involved in the ballistic missile programme.

Date of UN

designation:

3.3.2008

13.

Esfahan Nuclear Fuel Research and Production Centre (NFRPC) and Esfahan Nuclear Technology Centre (ENTC)

They are parts of the Atomic Energy Organisation of Iran's (AEOI) Nuclear Fuel Production and Procurement Company.

Date of UN

designation:

24.3.2007

14.

Ettehad Technical Group

AIO front-company, involved in the ballistic missile programme.

Date of UN

designation:

3.3.2008

15.

Fajr Industrial Group

(a) Formerly Instrumentation

Factory Plant;

(b) Subordinate entity of AIO; (c) Involved in Iran's ballistic

missile programme.

Date of UN

designation:

23.12.2006

16.

Farasakht Industries

Address:

P.O. Box 83145-311, Kilometer 28, Esfahan- Tehran Freeway, Shahin Shahr, Esfahan, Iran.

Farasakht Industries is owned or controlled by, or acts on behalf of, the Iran Aircraft Manufac­ turing Company, which in turn is owned or controlled by MODAFL.

Date of UN

designation:

9.6.2010

B 308 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

17.

Farayand Technique

(a) Involved in Iran's nuclear programme (centrifuge programme);

(b) Identified in IAEA reports.

Date of UN

designation:

23.12.2006

18.

Fater (or Faater) Institute

(a) Khatam al-Anbiya (KAA)

subsidiary;

(b) Fater has worked with foreign suppliers, likely on

behalf of other KAA companies on IRGC projects in Iran;

(c) Owned or controlled by, or

acting on behalf of, the Islamic Revolutionary Guard Corps.

Date of UN

designation:

9.6.2010

19.

First East Export Bank, P.L.C.

Address:

Unit Level 10 (B1), Main Office Tower, Financial Park Labuan, Jalan Merdeka,

87000 WP Labuan,

Malaysia.

(a) First East Export Bank, PLC is owned or controlled by, or acts on behalf of, Bank Mellat;

(b) Over the last seven years, Bank Mellat has facilitated

hundreds of millions of dollars in transactions for Iranian nuclear, missile,

and defense entities;

(c) Business Registration Number LL06889 (Malaysia).

Date of UN

designation:

9.6.2010

20.

Gharagahe Sazandegi Ghaem

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Gharagahe Sazandegi Ghaem is owned or controlled by KAA (see below).

Date of UN

designation:

9.6.2010

21.

Ghorb Karbala

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Ghorb Karbala is owned or controlled by KAA (see below).

Date of UN

designation:

9.6.2010

22.

Ghorb Nooh

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Ghorb Nooh is owned or controlled by KAA (see below).

Date of UN

designation:

9.6.2010

23.

Hara Company

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Owned or controlled by Ghorb Nooh.

Date of UN

designation:

9.6.2010

VERŻJONI ELETTRONIKA

B 309

Name

Identifying information

Reasons

Date of listing

24.

Imensazan Consultant

Engineers Institute

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Owned or controlled by, or acts on behalf of, KAA (see below).

Date of UN

designation:

9.6.2010

25.

Industrial Factories of Precision (IFP) Machinery (alias Instrumentation Factories Plant)

Used by AIO for some acquisition attempts.

Date of UN

designation:

3.3.2008

26.

Irano Hind Shipping

Company

Address:

(a) 18 Mehrshad Street, Sadaghat Street, Opposite of Park Mellat, Vali-e-Asr Ave., Tehran, Iran;

(b) 265, Next to Mehrshad, Sedaghat St., Opposite of Mellat Park, Vali Asr

Ave., Tehran 1A001, Iran.

Owned or controlled by, or acting on behalf of the Islamic Republic of Iran Shipping Lines.

Date of UN

designation:

9.6.2010

27.

IRISL Benelux NV

Address:

Noorderlaan 139, B-2030, Antwerp, Belgium V.A.T. Number BE480224531 (Belgium).

Owned or controlled by, or acting on behalf of the Islamic Republic of Iran Shipping Lines.

Date of UN

designation:

9.6.2010

28.

Jabber Ibn Hayan

AEOI laboratory involved in fuel cycle acitivties.

Date of EU

designation:

24.4.2007

(UN: 3.3.2008)

29.

Joza Industrial Co.

AIO front-company, involved in the ballistic missile programme.

Date of UN

designation:

3.3.2008

30.

Kala-Electric (alias Kalaye

Electric)

(a) Provider for PFEP — Natanz;

(b) Involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006

31.

Karaj Nuclear Research Centre

Part of AEOI's research division.

Date of UN

designation:

24.3.2007

32.

Kaveh Cutting Tools

Company

Address:

(a) 3rd Km of Khalaj Road, Seyyedi Street, Mashad

91638, Iran;

(b) Km 4 of Khalaj Road, End of Seyedi Street,

Mashad, Iran;

(c) P.O. Box 91735-549, Mashad, Iran;

(d) Khalaj Rd., End of

Seyyedi Alley, Mashad, Iran;

(e) Moqan St., Pasdaran St.,

Pasdaran Cross Rd., Tehran, Iran.

Kaveh Cutting Tools Company is owned or controlled by, or acts on behalf of, the DIO.

Date of UN

designation:

9.6.2010

B 310 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

33.

Kavoshyar Company

Subsidiary company of AEOI.

Date of UN

designation:

24.3.2007

34.

Khatam al-Anbiya

Construction Headquarters

Khatam al-Anbiya Construction Headquarters (KAA) is an Islamic Revolutionary Guard Corps (IRGC)-owned company involved in large scale civil and military construction projects and other engineering activities. It undertakes a significant amount of work on Passive Defense Organization projects. In particular, KAA subsidiaries were heavily involved in the construction of the uranium enrichment site at Qom/Fordow.

Date of EU

designation:

24.6.2008

(UN: 9.6.2010)

35.

Khorasan Metallurgy

Industries

(a) Subsidiary of the Ammunition Industries Group (AMIG) which depends on DIO;

(b) involved in the production of centrifuge components.

Date of UN

designation:

3.3.2008

36.

M. Babaie Industries

Address:

P.O. Box 16535-76, Tehran,

16548, Iran.

(a) M. Babaie Industries is subordinate to Shahid Ahmad Kazemi Industries Group (formally the Air Defense Missile Industries Group) of Iran's Aerospace Industries Organization (AIO);

(b) AIO controls the missile organizations Shahid Hemmat Industrial Group (SHIG) and the Shahid Bakeri Industrial Group (SBIG), both of which were designated in resolution

1737.

Date of UN

designation:

9.6.2010.

37.

Makin

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Makin is owned or controlled by or acting on behalf of KAA, and is a subsidiary of KAA.

Date of UN

designation:

9.6.2010.

38.

Malek Ashtar University

Address:

Corner of Imam Ali Highway and Babaei Highway, Tehran, Iran.

(a) a subordinate of the DTRSC

within MODAFL;

(b) this includes research groups previously falling under the Physics Research

Center (PHRC);

(c) IAEA inspectors have not been allowed to interview staff or see documents

under the control of this organization to resolve the outstanding issue of the possible military dimension

to Iran's nuclear program.

Date of EU

designation:

24.6.2008

(UN: 9.6.2010)

VERŻJONI ELETTRONIKA

B 311

Name

Identifying information

Reasons

Date of listing

39.

Mesbah Energy Company

(a) Provider for A40 research reactor — Arak;

(b) Involved in Iran's nuclear

programme.

Date of UN

designation:

23.12.2006

40.

Ministry of Defense Logistics

Export.

Address:

(a) PO Box 16315-189, Tehran, Iran;

(b) located on the west side

of Dabestan Street, Abbas Abad District, Tehran, Iran.

Ministry of Defense Logistics Export (MODLEX) sells Iranian- produced arms to customers around the world in contra­ vention of UN Security Council Resolution 1747 (2007), which prohibits Iran from selling arms or related materiel.

Date of EU

designation:

24.6.2008

(UN: 9.6.2010)

41.

Mizan Machinery Manufac­

turing (alias 3MG).

Address:

O. Box 16595-365, Tehran, Iran.

Mizan Machinery Manufacturing (3M) is owned or controlled by, or acts on behalf of, SHIG.

Date of EU

designation:

24.6.2008

(UN: 9.6.2010)

42.

Modern Industries Technique Company (alias (a) Rahkar Company,(b) Rahkar Industries, (c) Rahkar Sanaye Company, (d) Rahkar Sanaye Novin).

Address: Arak, Iran.

(a) Modern Industries Technique Company (MITEC) is responsible for design and construction of the IR-40 heavy water reactor in Arak;

(b) MITEC has spearheaded procurement for the construction of the IR-40 heavy water reactor.

Date of UN

designation:

9.6.2010

43.

Niru Battery Manufacturing

Company

(a) subsidiary of the DIO;

(b) its role is to manufacture power units for the Iranian military including missile systems.

Date of UN

designation:

3.3.2008

44.

Novin Energy Company (alias

Pars Novin)

It operates within AEOI.

Date of UN

designation:

24.3.2007

45.

Nuclear Research Center for Agriculture and Medicine (alias (a) Center for Agri­ cultural Research and Nuclear Medicine, (b) Karaji Agri­ cultural and Medical Research Center).

Address:

P.O. Box 31585-4395, Karaj, Iran.

(a) the Nuclear Research Center for Agriculture and Medicine (NFRPC) is a large research component of the Atomic Energy Organization of Iran (AEOI), which was designated in UN Security Council Resolution 1737 (2006);

(b) the NFRPC is AEOI's center for the development of

nuclear fuel and is involved in enrichment-related activities

Date of UN

designation:

9.6.2010

46.

Omran Sahel

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Owned or controlled by Ghorb Nooh.

Date of UN

designation:

9.6.2010

47.

Oriental Oil Kish

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Oriental Oil Kish is owned or controlled by or acting on behalf of KAA.

Date of UN

designation:

9.6.2010

B 312 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

48.

Parchin Chemical Industries

Branch of DIO

Date of UN

designation:

24.3.2007

49.

Pars Aviation Services

Company

Maintains aircraft

Date of UN

designation:

24.3.2007

50.

Pars Trash Company

(a) Involved in Iran's nuclear programme (centrifuge programme);

(b) Identified in IAEA reports

Date of UN

designation:

23.12.2006

51.

Pejman Industrial Services

Corporation

Address:

P.O. Box 16785-195, Tehran, Iran

Pejman Industrial Services Corporation is owned or controlled by, or acts on behalf of, SBIG

Date of UN

designation:

9.6.2010

52.

Pishgam (Pioneer) Energy

Industries

Has participated in construction of the Uranium Conversion Facility at Esfahan

Date of UN

designation:

3.3.2008

53.

Qods Aeronautics Industries

It produces unmanned aerial vehicles (UAVs), parachutes, paragliders, paramotors, etc.

Date of UN

designation:

24.3.2007

54.

Rah Sahel

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Rah Sahel is owned or controlled by or acting on behalf of KAA.

Date of UN

designation:

9.6.2010

55.

Rahab Engineering Institute

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Rahab is owned or controlled by or acting on behalf of KAA, and is a subsidiary of KAA.

Date of UN

designation:

9.6.2010

56.

Sabalan Company

Address:

Damavand Tehran Highway, Tehran, Iran.

Sabalan is a cover name for

SHIG.

Date of UN

designation:

9.6.2010

57.

Sanam Industrial Group

Subordinate to AIO.

Date of UN

designation:

24.3.2007

58.

Safety Equipment

Procurement (SEP)

AIO front-company, involved in the ballistic missile programme.

Date of UN

designation:

3.3.2008

59.

Sahand Aluminum Parts

Industrial Company (SAPICO)

Address:

Damavand Tehran Highway, Tehran, Iran.

SAPICO is a cover name for

SHIG.

Date of UN

designation:

9.6.2010

VERŻJONI ELETTRONIKA

B 313

Name

Identifying information

Reasons

Date of listing

60.

Sahel Consultant Engineers

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Owned or controlled by Ghorb Nooh.

Date of UN

designation:

9.6.2010

61.

Sepanir

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Sepanir is owned or controlled by or acting on behalf of KAA

Date of UN

designation:

9.6.2010

62.

Sepasad Engineering

Company

Owned or controlled by, or acting on behalf of, the Islamic Revolutionary Guard Corps. Sepasad Engineering Company is owned or controlled by or acting on behalf of KAA.

Date of UN

designation:

9.6.2010

63.

7th of Tir.

(a) Subordinate of DIO, widely recognised as being directly involved in Iran's nuclear programme;

(b) Involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006.

64.

Shahid Bagheri Industrial

Group (SBIG)

(a) Subordinate entity of AIO; (b) Involved in Iran's ballistic

missile programme.

Date of UN

designation:

23.12.2006.

65.

Shahid Hemmat Industrial

Group (SHIG)

(a) subordinate entity of AIO; (b) Involved in Iran's ballistic

missile programme.

Date of UN

designation:

23.12.2006.

66.

Shahid Karrazi Industries.

Address: Tehran, Iran.

Shahid Karrazi Industries is owned or controlled by, or act on behalf of, SBIG.

Date of UN

designation:

9.6.2010

67.

Shahid Satarri Industries (alias Shahid Sattari Group Equipment Industries)

Address:

Southeast Tehran, Iran.

Shahid Sattari Industries is owned or controlled by, or acts on behalf of, SBIG.

Date of UN

designation:

9.6.2010

68.

Shahid Sayyade Shirazi

Industries

Address:

(a) Next to Nirou Battery

Mfg. Co, Shahid Babaii Expressway, Nobonyad Square, Tehran, Iran;

(b) Pasdaran St., P.O. Box

16765, Tehran 1835, Iran,

(c) Babaei Highway — Next

to Niru M.F.G, Tehran, Iran.

Shahid Sayyade Shirazi Industries (SSSI) is owned or controlled by, or acts on behalf of, the DIO.

Date of UN

designation:

9.6.2010

69.

Sho’a’ Aviation

It produces microlights.

Date of UN

designation:

24.3.2007

B 314 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

70.

South Shipping Line Iran

(SSL)

Address:

(a) Apt. No. 7, 3rd Floor, No. 2, 4th Alley, Gandi

Ave., Tehran, Iran;

(b) Qaem Magham Farahani

St., Tehran, Iran.

Owned or controlled by, or acting on behalf of, the Islamic Republic of Iran Shipping Lines.

Date of UN

designation:

9.6.2010

71.

Special Industries Group

Address:

Pasdaran Avenue, PO Box

19585/777, Tehran, Iran.

Special Industries Group (SIG) is a subordinate of DIO.

Date of EU

designation:

24.4.2007

(UN: 9.6.2010)

72.

TAMAS Company

(a) involved in enrichment- related activities;

(b) TAMAS is an overarching

body, under which four subsidiaries have been established, including one for uranium extraction to concentration and another in charge of uranium processing, enrichment and waste.

Date of EU

designation:

24.4.2007

(UN: 3.3.2008)

73.

Tiz Pars

Address:

Damavand Tehran Highway, Tehran, Iran.

(a) Tiz Pars is a cover name for

SHIG;

(b) Between April and July

2007, Tiz Pars attempted to procure a five axis laser

welding and cutting machine, which could make a material contribution to Iran's

missile program, on behalf of SHIG.

Date of UN

designation:

9.6.2010

74.

Ya Mahdi Industries Group

Subordinate to AIO.

Date of UN

designation:

24.3.2007

75.

Yazd Metallurgy Industries (alias (a) Yazd Ammunition Manufacturing and Metallurgy Industries, (b) Directorate of Yazd Ammunition and Metallurgy Industries.)

Address:

(a) Pasdaran Avenue, Next to Telecommunication

Industry, Tehran 16588, Iran;

(b) Postal Box 89195/878,

Yazd, Iran,

(c) P.O. Box 89195-678, Yazd, Iran,

(d) Km 5 of Taft Road,

Yazd, Iran.

Metallurgy Industries (YMI) is a subordinate of DIO.

Date of UN

designation:

9.6.2010

B. Natural persons

Name

Identifying information

Reasons

Date of listing

1.

Fereidoun ABBASI-DAVANI

Senior Ministry of Defence and Armed Forces Logistics (MODAFL) scientist with links to the Institute of Applied Physics. Working closely with Mohsen Fakhrizadeh-Mahabadi.

Date of UN

designation:

24.3.2007

VERŻJONI ELETTRONIKA

B 315

Name

Identifying information

Reasons

Date of listing

2.

Dawood AGHA-JANI

Function: Head of the PFEP – Natanz.

Person involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006

3.

Ali Akbar AHMADIAN

Title: Vice Admiral.

Function: Chief of Iranian

Revolutionary Guard Corps

(IRGC) Joint Staff

Date of UN

designation:

24.3.2007

4.

Amir Moayyed ALAI

Involved in managing the assembly and engineering of centrifuges.

Date of EU

designation:

24.4.2007

(UN: 3.3.2008)

5.

Behman ASGARPOUR

Function: Operational Manager

(Arak)

Person involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006

6.

Mohammad Fedai ASHIANI

Involved in the production of ammonium uranyl carbonate and management of the Natanz enrichment complex.

Date of EU

designation:

24.4.2007

(UN: 3.3.2008)

7.

Abbas Rezaee ASHTIANI

A senior official at the AEOI Office of Exploration and Mining Affairs.

Date of UN

designation:

3.3.2008

8.

Bahmanyar Morteza

BAHMANYAR

Function: Head of Finance & Budget Dept, Aerospace Industries Organisation (AIO). Person involved in Iran's ballistic missile programme.

Date of UN

designation:

23.12.2006

9.

Haleh BAKHTIAR

Involved in the production of magnesium at a concentration of 99,9 %.

Date of EU

designation:

24.4.2007

UN: 3.3.2008)

10.

Morteza BEHZAD

Involved in making centrifuge components.

Date of EU

designation:

24.4.2007

(UN: 3.3.2008)

11.

Ahmad Vahid DASTJERDI

Function: Head of the Aerospace Industries Organi­ sation (AIO).

Person involved in Iran's ballistic missile programme.

Date of UN

designation:

23.12.2006

12.

Ahmad DERAKHSHANDEH

Function: Chairman and Managing Director of Bank Sepah.

Date of UN

designation:

24.3.2007

13.

Mohammad ESLAMI

Title: Dr.

Head of Defence Industries

Training and Research Institute.

Date of UN

designation:

3.3.2008

B 316 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

14.

Reza-Gholi ESMAELI

Function: Head of Trade & International Affairs Dept, Aerospace Industries Organi­ sation (AIO).

Person involved in Iran's ballistic missile programme.

Date of UN

designation:

23.12.2006

15.

Mohsen FAKHRIZADEH- MAHABADI

Senior MODAFL scientist and former head of the Physics Research Centre (PHRC).

Date of UN

designation:

24.3.2007

16.

Mohammad HEJAZI

Title: Brigadier General. Function: Commander of Bassij resistance force.

Date of UN

designation:

24.3.2007

17.

Mohsen HOJATI

Function: Head of Fajr Industrial

Group.

Date of UN

designation:

24.3.2007

18.

Seyyed Hussein HOSSEINI

AEOI official involved in the heavy water research reactor project at Arak.

Date of EU

designation:

24.4.2007

(UN: 3.3.2008)

19.

M. Javad KARIMI SABET

Head of Novin Energy Company, which is designated under resolution 1747 (2007).

Date of EU

designation:

24.4.2007

(UN: 3.3.2008)

20.

Mehrdada Akhlaghi

KETABACHI

Function: Head of Shahid

Bagheri Industrial Group (SBIG).

Date of UN

designation:

24.3.2007

21.

Ali Hajinia LEILABADI

Function: Director General of Mesbah Energy Company. Person involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006

22.

Naser MALEKI

Function: Head of Shahid Hemmat Industrial Group (SHIG).

Naser Maleki is also a MODAFL official overseeing work on the Shahab-3 ballistic missile programme. The Shahab-3 is

Iran's long-range ballistic missile currently in service.

Date of UN

designation:

24.3.2007

23.

Hamid-Reza MOHAJERANI

Involved in production management at the Uranium Conversion Facility (UCF) at Esfahan.

Date of EU

designation:

24.4.2007

(UN: 3.3.2008)

24.

Jafar MOHAMMADI

Function: Technical Adviser to the Atomic Energy Organisation of Iran (AEOI) (in charge of managing the production of valves for centrifuges).

Person involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006

VERŻJONI ELETTRONIKA

B 317

Name

Identifying information

Reasons

Date of listing

25.

Ehsan MONAJEMI

Function: Construction Project Manager, Natanz. Person involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006

26.

Mohammad Reza NAQDI

Title: Brigadier General.

Former Deputy Chief of Armed Forces General Staff for Logistics and Industrial Research/Head of State Anti- Smuggling Headquarters, engaged in efforts to get round the sanctions imposed by resolutions 1737 (2006) and

1747 (2007).

Date of UN

designation:

3.3.2008

27.

Houshang NOBARI

Involved in the management of the Natanz enrichment complex.

Date of EU

designation:

24.4.2007

(UN: 3.3.2008)

28.

Mohammad Mehdi Nejad

NOURI

Title: Lt Gen.

Function: Rector of Malek Ashtar University of Defence Technology. The chemistry department of Ashtar University of Defence Technology is affiliated to MODALF and has conducted experiments on beryllium. Person involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006

29.

Mohammad QANNADI

Function: AEOI Vice President for Research & Devel­ opment.Person involved in Iran's nuclear programme.

Date of UN

designation:

23.12.2006

30.

Amir RAHIMI

Function: Head of Esfahan Nuclear Fuel Research and Production Center. Esfahan Nuclear Fuel Research and Production Center is part of the AEOI's Nuclear Fuel Production and Procurement Company, which is involved in enrichment-related activities.

Date of UN

designation:

24.3.2007

31.

Javad RAHIQI

Date of birth:

24.4.1954. Place of birth:

Marshad.

Function: Head of the Atomic Energy Organization of Iran (AEOI) Esfahan Nuclear Tech­ nology Center

Date of EU

designation:

24.4.2007

(UN: 9.6.2010)

32.

Abbas RASHIDI

Involved in enrichment work at

Natanz.

Date of EU

designation:

24.4.2007

(UN: 3.3.2008)

33.

Morteza REZAIE

Title: Brigadier General. Function: Deputy Commander of IRGC.

Date of UN

designation:

24.3.2007

B 318 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

34.

Morteza SAFARI

Title: Rear Admiral.

Function: Commander of IRGC Navy.

Date of UN

designation:

24.3.2007

35.

Yahya Rahim SAFAVI

Title: Maj Gen.

Function: Commander, IRGC (Pasdaran). Person involved in both Iran's nuclear and ballistic missile programmes.

Date of UN

designation:

23.12.2006

36.

Seyed Jaber SAFDARI

Manager of the Natanz

Enrichment Facilities.

Date of UN

designation:

24.3.2007

37.

Hosein SALIMI

Title: General.

Function: Commander of the Air Force, IRGC (Pasdaran). Person involved in Iran's ballistic missile programme.

Date of UN

designation:

23.12.2006

38.

Qasem SOLEIMANI

Title: Brigadier General.

Function: Commander of Qods force.

Date of UN

designation:

24.3.2007

39.

Ghasem SOLEYMANI

Director of Uranium Mining Operations at the Saghand Uranium Mine.

Date of UN

designation:

3.3.2008

40.

Mohammad Reza ZAHEDI

Title: Brigadier General.

Function: Commander of IRGC Ground Forces.

Date of UN

designation:

24.3.2007

41.

General ZOLQADR

Function: Deputy Interior Minister for Security Affairs, IRGC officer.

Date of UN

designation:

24.3.2007

VERŻJONI ELETTRONIKA

B 319

ANNEX VIII

List of persons, entities and bodies referred to in Article 16(2)

A. Natural persons

Name

Identifying information

Reasons

Date of listing

1.

Reza AGHAZADEH

DoB: 15/3/1949 Passport number: S4409483 valid

26/4/2000 – 27/4/2010: Issued: Tehran, Diplomatic passport

number: D9001950, issued on

22/1/2008 valid until

21/1/2013, Place of birth: Khoy

Former Head of the Atomic Energy Organisation of Iran (AEOI). The AEOI oversees Iran's nuclear programme and is designated under UNSCR 1737 (2006).

23.4.2007

2.

Javad DARVISH-VAND

IRGC Brigadier-General. MODAFL Deputy for Inspection. Responsible for all MODAFL facilities and installations

23.6.2008

3.

Ali DIVANDARI (a.k.a DAVANDARI)

Head of Bank Mellat (see Part B, no 4)

26.7.2010

4.

Rear Admiral Ali FADAVI

Commander of IRGC Navy

26.7.2010

5.

Dr Hoseyn (Hossein) FAQIHIAN

Address of NFPC: AEOI-NFPD, P.O.Box: 11365-8486, Tehran/Iran

Deputy and Director-General of the Nuclear Fuel Production and Procurement Company (NFPC) (see Part B, no 30), part of the AEOI. The AEOI oversees Iran's nuclear programme and is designated under UNSCR 1737 (2006). The NFPC is involved in enrichment-related activities that Iran is required by the IAEA Board and Security Council to suspend.

23.4.2007

6.

Seyyed Mahdi FARAHI

IRGC Brigadier-General. Managing Director of the Defence Industries Organisation (DIO) which is designated under UNSCR 1737 (2006)

23.6.2008

7.

Parviz FATAH

born 1961

Khatam al Anbiya's number two

26.7.2010

8.

Engineer Mojtaba HAERI

MODAFL Deputy for Industry. Supervisory role over

AIO and DIO

23.6.2008

9.

Ali HOSEYNITASH

IRGC Brigadier-General. Head of the General Department of the Supreme National Security Council and involved in formulating policy on the nuclear issue

23.6.2008

10.

Mohammad Ali JAFARI

Commander of the IRGC

23.6.2008

11.

Mahmood JANNATIAN

DoB 21/4/1946, passport number: T12838903

Deputy Head of the Atomic Energy Organisation of

Iran

23.6.2008

12.

Said Esmail KHALILIPOUR (a.k.a.: LANGROUDI)

DoB: 24/11/1945, PoB: Langroud

Deputy Head of AEOI. The AEOI oversees Iran's nuclear programme and is designated under UNSCR 1737 (2006).

23.4.2007

13.

Ali Reza KHANCHI

Address of NRC: AEOI-NRC P.O.Box: 11365-8486 Tehran/Iran; Fax: (+9821) 8021412

Head of AEOI's Tehran Nuclear Research Centre. The IAEA is continuing to seek clarification from Iran about plutonium separation experiments carried out at the TNRC, including about the presence of HEU particles in environmental samples taken at the Karaj Waste Storage Facility where containers used to store depleted uranium targets used in those experiments are located. The AEOI oversees Iran's nuclear programme and is designated under UNSCR 1737 (2006).

23.4.2007

B 320 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

14.

Fereydoun MAHMOUDIAN

Born on 7/11/1943 in Iran. Passport no 05HK31387 issued on 1/1/2002 in Iran, valid until

7/8/2010.

Acquired French nationality on

7/5/2008

Director of Fulmen (see Part B, No 13)

26.7.2010

15.

Ebrahim MAHMUDZADEH

Managing Director of Iran Electronic Industries (see

Part B, no 20)

23.6.2008

16.

Brigadier-General

Beik MOHAMMADLU

MODAFL Deputy for Supplies and Logistics (see Part

B, no 29)

23.6.2008

17.

Mohammad MOKHBER

4th Floor, No 39 Ghandi street

Tehran

Iran 1517883115

President of the Setad Ejraie foundation, an investment fund linked to Ali Khameneï, the Supreme Leader. Member of the Management Board of Sina Bank.

26.7.2010

18.

Mohammad Reza MOVASAGHNIA

Head of Samen Al A’Emmeh Industries Group (SAIG), also known as the Cruise Missile Industry Group. This organisation was designated under UNSCR 1747 and listed in Annex I to Common Position 2007/140/CFSP.

26.7.2010

19.

Anis NACCACHE

Administrator of Barzagani Tejarat Tavanmad Saccal companies; his company has attempted to procure sensitive goods for entities designated under Resolution 1737 (2006).

23.6.2008

20.

Brigadier-General Mohammad

NADERI

Head of Aerospace Industries Organisation (AIO) (see Part B, no 1). AIO has taken part in sensitive Iranian programmes.

23.6.2008

21.

Mostafa Mohammad NAJJAR

IRGC Brigadier-General. Minister for the Interior and former Minister of MODAFL, responsible for all military programmes, including ballistic missiles programmes.

23.6.2008

22.

Mohammad Reza NAQDI

Born in 1953, Nadjaf (Iraq)

Brigadier General, Commander of Basij Resistance

Force

26.7.2010

23.

Mohammad PAKPUR

Brigadier General, Commander of IRGC Ground

Forces

26.7.2010

24.

Rostam QASEMI (a.k.a. Rostam

GHASEMI)

Born in 1961

Commander of Khatam al-Anbiya

26.7.2010

25.

Hossein SALAMI

Brigadier General, Deputy Commander of the IRGC

26.7.2010

26.

Ali Akbar SALEHI

Head of the Atomic Energy Organisation of Iran (AEOI). The AEOI oversees Iran's nuclear programme and is designated under UNSCR 1737 (2006).

17.11.2009

27.

Rear Admiral Mohammad SHAFI'I RUDSARI

Former MODAFL Deputy for Coordination (see Part

B, no 29).

23.6.2008

28.

Ali SHAMSHIRI

IRGC Brigadier-General. MODAFL Deputy for Counter-Intelligence, responsible for security of MODAFL personnel and Installations

23.6.2008

VERŻJONI ELETTRONIKA

B 321

Name

Identifying information

Reasons

Date of listing

29.

Abdollah SOLAT SANA

Managing Director of the Uranium Conversion Facility (UCF) in Esfahan. This is the facility that produces the feed material (UF6) for the enrichment facilities at Natanz. On 27 August 2006, Solat Sana received a special award from President Ahma­ dinejad for his role.

23.4.2007

30.

Ahmad VAHIDI

IRGC Brigadier-General, Minister of the MODAFL

and former Deputy Head of MODAFL

23.6.2008

B. Legal persons, entities and bodies

Name

Identifying information

Reasons

Date of listing

1.

Aerospace Industries Organisation, AIO

AIO, 28 Shian 5, Lavizan, Tehran, Iran

Langare Street,

Nobonyad Square, Tehran, Iran

AIO oversees Iran's production of missiles, including Shahid Hemmat Industrial Group, Shahid Bagheri Industrial Group and Fajr Industrial Group, which were all designated under UNSCR 1737 (2006). The head of AIO and two other senior officials were also designated under UNSCR 1737 (2006)

23.4.2007

2.

Armed Forces Geographical

Organisation

Assessed to provide geospatial data for the Ballistic

Missile programme

23.6.2008

3.

Azarab Industries

Ferdowsi Ave, PO Box 11365-171, Tehran, Iran

Energy sector firm that provides manufacturing support to the nuclear programme, including designated proliferation sensitive activities. Involved in the construction of the Arak heavy-water reactor.

26.7.2010

4.

Bank Mellat (including all branches) and subsidiaries

(a) Mellat Bank SB CJSC

(b) Persia International Bank Plc

Head Office Building, 327

Takeghani (Taleghani) Avenue, Tehran 15817, Iran;

P.O. Box 11365-5964, Tehran

15817, Iran

P.O. Box 24, Yerevan 0010, Republic of Armenia

Number 6 Lothbury, Post Code: EC2R 7HH, United Kingdom

Bank Mellat engages in a pattern of conduct which supports and facilitates Iran’s nuclear and ballistic missile programmes. It has provided banking services to UN and EU listed entities or to entities acting on their behalf or at their direction, or to entities owned or controlled by them. It is the parent bank of First East Export Bank which is designated under UNSCR 1929.

100 % owned by Bank Mellat

60 % owned by Bank Mellat

26.7.2010

26.7.2010

26.7.2010

5.

Bank Melli,

Bank Melli Iran (including all branches) and subsidiaries

Ferdowsi Avenue,

PO Box 11365-171, Tehran, Iran

Providing or attempting to provide financial support for companies which are involved in or procure goods for Iran's nuclear and missile programmes (AIO, SHIG, SBIG, AEOI, Novin Energy Company, Mesbah Energy Company, Kalaye Electric Company and DIO). Bank Melli serves as a facilitator for Iran's sensitive activities. It has facilitated numerous purchases of sensitive materials for Iran's nuclear and missile programmes. It has provided a range of financial services on behalf of entities linked to Iran's nuclear and missile industries, including opening letters of credit and maintaining accounts. Many of the above companies have been designated by UNSCRs 1737 (2006) and 1747 (2007).

Bank Melli continues in this role, by engaging in a pattern of conduct which supports and facilitates Iran's sensitive activities. Using its banking rela­ tionships, it continues to provide support for, and financial services to, UN and EU listed entities in relation to such activities. It also acts on behalf of, and at the direction of such entities, including Bank Sepah, often operating through their subsidiaries and associates.

23.6.2008

B 322 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

(a) Arian Bank (a.k.a. Aryan Bank) (b) Assa Corporation

(c) Assa Corporation Ltd

(d) Bank Kargoshaie ( a.k.a. Bank Kargoshaee, a.k.a Kargosai Bank, a.k.a Kargosa'i Bank)

(e) Bank Melli Iran Investment

Company (BMIIC)

(f) Bank Melli Iran

(g) Bank Melli Printing and

Publishing Company (BMPPC)

(h) Cement Investment and Devel­ opment Company (CIDCO) (a.k.a.: Cement Industry Investment and Development Company, CIDCO, CIDCO Cement Holding)

(i) First Persian Equity Fund

House 2, Street Number 13, Wazir

Akbar Khan, Kabul, Afghanistan

ASSA CORP, 650 (or 500) Fifth

Avenue, New York, USA;

Tax ID No. 1368932 (United

States)

6 Britannia Place, Bath Street, St Helier JE2 4SU, Jersey Channel Islands

587 Mohammadiye Square, Mowlavi St., Tehran 11986, Iran

No 1 - Didare Shomali Haghani Highway 1518853115 Tehran Iran;

Alt. Location: No.2, Nader Alley, Vali-Asr Str., Tehran, Iran, P.O. Box 3898-15875;

Alt. Location: Bldg 2, Nader Alley after Beheshi Forked Road, P.O. Box 15875-3898, Tehran, Iran

15116;

Alt., Location: Rafiee Alley, Nader Alley, 2 After Serahi Shahid Beheshti, Vali E Asr Avenue,

Tehran, Iran; Business Registration

Number: 89584.

Number 9/1, Ulitsa Mashkova, Moscow, 130064, Russia Alternative addr:

Mashkova st. 9/1 Moscow 105062

Russia

18th Km Karaj Special Road,

1398185611 Tehran, Iran, P.O. Box 37515-183;

Alt. Location: Km 16 Karaj Special

Road, Tehran, Iran;

Business Registration Number

382231

No 20, West Nahid Blvd. Vali Asr

Ave. Tehran, Iran, 1967757451

No. 241, Mirdamad Street, Tehran, Iran

Walker House, 87 Mary Street, George Town, Grand Cayman, KY1-9002, Cayman Islands;

Alt. Location: Clifton House, 7z5

Fort Street, P.O. Box 190, Grand

Cayman, KY1-1104; Cayman

Islands;

Alt. Location: Rafi Alley, Vali Asr

Avenue, Nader Alley, Tehran,

15116, Iran, P.O.Box 15875-3898

Arian Bank is a joint-venture between Bank Melli and Bank Saderat.

Assa Corporation is a front company created and controlled by Bank Melli. It was set up by Bank Melli to channel money from the United States to Iran.

Assa Corporation Ltd is the parent organization of Assa Corporation. Owned or controlled by Bank Melli

Bank Kargoshaee is owned by Bank Melli.

Affiliated with entities sanctioned by the United States, the European Union or the United Nations since 2000. Designated by the United States for being owned or controlled by Bank Melli.

Designated by the United States for being owned or controlled by Bank Melli

Wholly owned by Bank Melli Investment Co. Holding Company to manage all cement companies owned by BMIIC

Cayman-based fund licensed by the Iranian Government for foreign investment in the Tehran Stock Exchange

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

23.6.2008

26.7.2010

26.7.2010

26.7.2010

VERŻJONI ELETTRONIKA

B 323

Name

Identifying information

Reasons

Date of listing

(j) Mazandaran Cement Company

(k) Mehr Cayman Ltd.

(l) Melli Agrochemical Company PJS (a.k.a: Melli Shimi Keshavarz)

(m) Melli Bank plc

(n) Melli Investment Holding Inter­

national

(o) Shemal Cement Company (a.k.a: Siman Shomal, a.k.a Shomal Cement Company )

No 51, sattari st. Afric Ave. Tehran

Iran

Alt. Loc.: Africa Street, Sattari

Street No. 40, P.O. Box 121, Tehran, Iran 19688;

Alt Location: 40 Satari Ave.

Afrigha Highway, P.O. Box

19688, Tehran, Iran

Cayman Islands; Commercial Registry Number 188926 (Cayman Islands)

5th Floor No 23 15th Street, Gandi Ave. Vanak Sq., Tehran, Iran Alt. Loc.: Mola Sadra Street, 215

Khordad, Sadr Alley No. 13, Vanak Sq., P.O. Box 15875-1734,

Tehran, Iran

London Wall, 11th floor, London

EC2Y 5EA, United Kingdom

514 Business Avenue Building, Deira, P.O. Box 181878, Dubai, United Arab Emirates;

Registration Certificate Number

(Dubai) 0107 issued 30. Nov

2005.

No 269 Dr Beheshti Ave. P.O. Box

15875/4571 Tehran - 15146 Iran Alt. Loc.: Dr Beheshti Ave No. 289, Tehran, Iran 151446;

Alt. Location: 289 Shahid Baheshti

Ave., P.O. Box 15146, Tehran, Iran

Controlled by Bank Melli Iran

Owned or controlled by Bank Melli

Owned or controlled by Bank Melli

Owned or controlled by Bank Melli

Controlled by Bank Melli Iran

26.7.2010

26.7.2010

26.7.2010

23.6.2008

26.7.2010

26.7.2010

6.

Bank Refah

40, North Shiraz Street, Mollasadra

Ave., Vanak Sq., Tehran, 19917

Iran

Bank Refah has taken over ongoing operations from Bank Melli in the wake of the sanctions imposed on the latter by the European Union.

26.7.2010

7.

Bank Saderat Iran (including all branches) and subsidiaries:

(a) Bank Saderat PLC (London)

Bank Saderat Tower, 43 Somayeh

Ave, Tehran, Iran.

5 Lothbury, London, EC2R

7 HD, UK

Bank Saderat is an Iranian bank partlyowned by the Iranian government. Bank Saderat has provided financial services for entities procuring on behalf of Iran’s nuclear and ballistic missile programmes, including entities designated under UNSCR 1737. Bank Saderat handled DIO (sanctioned in UNSCR

1737) and Iran Electronics Industries payments and letters of credit as recently as March 2009. In

2003 Bank Saderat handled letter of credit on behalf of Iranian nuclear-related Mesbah Energy Company (subsequently sanctioned in UNSR 1737).

100 % owned subsidiary of Bank Saderat

26.7.2010

8.

Sina Bank

187, Avenue Motahari, Teheran, Iran

This bank is very closely linked to the interests of

‘Daftar’ (Office of the Supreme Leader, with an administration of some 500 collaborators). It

contributes in this way to funding the regime's strategic interests.

26.7.2010

B 324 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

9.

ESNICO (Equipment Supplier for

Nuclear Industries Corporation)

No 1, 37th Avenue, Asadabadi

Street, Tehran, Iran

Procures industrial goods, specifically for the nuclear programme activities carried out by AEOI, Novin Energy and Kalaye Electric Company (all designated under UNSCR 1737). ESNICO’s Director is Haleh Bakhtiar (designated in UNSCR 1803).

26.7.2010

10.

Etemad Amin Invest Co Mobin

Pasadaran Av. Tehran, Iran

Close to Naftar and to Bonyad-e Mostazafan, Etemad Amin Invest Co Mobin contributes to funding the strategic interests of the regime and of the parallel Iranian state.

26.7.2010

11.

Export Development Bank of Iran (EDBI) (including all branches) and subsidiaries:

(a) EDBI Exchange Company (a.k.a.

Export Development Exchange

Broker Co.)

(b) EDBI Stock Brokerage

Company

(c) Banco Internacional De

Desarrollo CA

Export Development Building,

21th floor, Tose'e tower, 15th st, Ahmad Qasir Ave, Tehran - Iran,

15138-35711

next to the 15th Alley, Bokharest Street, Argentina Square, Tehran, Iran;

Tose'e Tower, corner of 15th St,

Ahmad Qasir Ave., Argentine

Square, Tehran, Iran;

No. 129, 21 's Khaled Eslamboli, No. 1 Building, Tehran, Iran;

C.R. No. 86936 (Iran)

No 20, 13th St., Vozara Ave., Tehran, Iran 1513753411, P.O. Box: 15875-6353

Alt. Loc.: Tose'e Tower, corner of

15th St., Ahmad Qasir Ave.; Argentine Square, Tehran, Iran

Tose'e Tower, corner of 15th St., Ahmad Qasir Ave.; Argentine Square, Tehran, Iran

Urb. El Rosal, Avenida Francesco de Miranda, Edificio Dozsa, Piso

8, Caracas C.P. 1060, Venezuela

The Export Development Bank of Iran (EDBI) has been involved in the provision of financial services to companies connected to Iran’s programmes of proliferation concern and has helped UN-designated entities to circumvent and breach sanctions. It provides financial services to MODAFL-subordinate entities and to their front companies which support Iran’s nuclear and ballistic missile programmes. It has continued to handle payments for Bank Sepah, post-designation by the UN, including payments related to Iran’s nuclear and ballistic missile programmes. EDBI has handled transactions linked to Iran’s defence and missile entities, many of which have been sanctioned by UNSC. EDBI served as a leading intermediary handling Bank Sepah’s (sanc­ tioned by UNSC since 2007) financing, including WMD-related payments. EDBI provides financial services to various MODAFL entities and has facilitated ongoing procurement activities of front companies associated with MODAFL entities.

Tehran-based EDBI Exchange Company is 70 %- owned by Export Development Bank of Iran (EDBI). It was designated by the United States in October 2008 for being owned or controlled by EDBI.

Tehran-based EDBI Stock Brokerage Company is a wholly owned subsidiary of Export Development Bank of Iran (EDBI). It was designated by the United States in October 2008 for being owned or controlled by EDBI.

Banco Internacional De Desarrollo CA is owned by the Export Development Bank of Iran.

26.7.2010

26.7.2010

26.7.2010

26.7.2010

12.

Fajr Aviation Composite Industries

Mehrabad Airport, PO Box

13445-885, Tehran, Iran

A subsidiary of the IAIO within MODAFL (see no

29), which primarily produces composite materials for the aircraft industry, but also linked to the devel­

opment of carbon fibre capabilities for nuclear and missile applications. Linked to the Technology Cooperation Office. Iran has recently announced its intention to mass produce new generation

centrifuges which will require FACI carbon fibre production capabilities.

26.7.2010

13.

Fulmen

(a) Arya Niroo Nik

167 Darya boulevard - Shahrak

Ghods, 14669 - 8356 Tehran.

Fulmen was involved in the installation of electrical equipment on the Qom/Fordoo site before its existence had been revealed.

Arya Niroo Nik is a front company used by Fulmen for some of its operations.

26.7.2010

26.7.2010

VERŻJONI ELETTRONIKA

B 325

Name

Identifying information

Reasons

Date of listing

14.

Future Bank BSC

Block 304. City Centre Building. Building 199, Government Avenue, Road 383, Manama, Bahrain. PO Box 785; Business Registration 2k Document:

54514-1 (Bahrain) expires 9 Jun

2009; Trade License No 13388 (Bahrain)

Two-thirds of Bahrain-based Future Bank are owned by Iranian banks. EU-designated Bank Melli and Bank Saderat each own one-third of the shares, the remaining third being held by Ahli United Bank (AUB) of Bahrain. Although AUB still owns its shares of Future Bank, according to its 2007 annual report, AUB no longer exercises significant influence over the bank which is effectively controlled by its Iranian parents both of which are singled out in UNSCR 1803 as Iranian banks requiring particular ‘vigilance’. The tight links between Future Bank and Iran are further evidenced by the fact that the Chairman of Bank Melli has also held concurrently the position of Chairman of Future Bank.

26.7.2010

15.

Industrial Development & Reno­

vation Organization (IDRO)

Government body responsible for acceleration of Iran’s industrialisation. Controls various companies involved in work for the nuclear and missile programmes and involved in the foreign procurement advanced manufacturing technology in order to support them.

26.7.2010

16.

Iran Aircraft Industries (IACI)

A subsidiary of the IAIO within MODAFL (see no

29). Manufactures, repairs, and conducts overhauls of airplanes and aircraft engines and procures

aviation-related parts often of US-origin typically via foreign intermediaries. IACI and its subsidiaries have also been detected using a worldwide network of brokers seeking to procure aviation-related goods.

26.7.2010

17.

Iran Aircraft Manufacturing Company (a.k.a: HESA, HESA Trade Center, HTC, IAMCO, IAMI, Iran Aircraft Manufacturing Company, Iran Aircraft Manufac­ turing Industries, Karkhanejate Sanaye Havapaymaie Iran, Hava Peyma Sazi-e Iran, Havapeyma Sazhran, Havapeyma Sazi Iran, Hevapeimasazi)

P.O. Box 83145-311, 28 km Esfahan – Tehran Freeway, Shahin Shahr, Esfahan, Iran;

P.O. Box 14155-5568, No. 27

Ahahamat Ave., Vallie Asr Square, Tehran 15946, Iran;

P.O. Box 81465-935, Esfahan,

Iran;

Shahih Shar Industrial Zone, Isfahan, Iran; P.O. Box 8140, No.

107 Sepahbod Gharany Ave.,

Tehran, Iran

Owned or controlled by, or acts on behalf of; MODAFL (see no 29).

26.7.2010

18.

Iran Centrifuge Technology

Company (a.k.a. TSA or TESA)

TESA has taken over the activities of Farayand Technique (designated under UNSCR 1737). It manufactures uranium enrichment centrifuge parts, and is directly supporting proliferation sensitive activity that Iran is required to suspend by UNSCRs. Carries out work for Kalaye Electric Company (designated under UNSCR 1737).

26.7.2010

19.

Iran Communications Industries

(ICI)

PO Box 19295-4731, Pasdaran

Avenue, Tehran, Iran;

Alternative address: PO Box

19575-131, 34 Apadana Avenue, Tehran, Iran;

Alternative address: Shahid Langary Street, Nobonyad Square Ave, Pasdaran, Tehran

Iran Communications Industries, a subsidiary of Iran Electronics Industries (see no 20), produces various items including communication systems, avionics, optics and electro-optics devices, micro-electronics, information technology, test and measurement, tele­ communication security, electronic warfare, radar tube manufacture and refurbishment, and missile launchers. These items can be used in programmes that are under sanction per UNSCR 1737.

26.7.2010

B 326 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

20.

Iran Electronics Industries (including all branches) and subsidiaries:

(a) Isfahan Optics

P. O. Box 18575-365, Tehran, Iran

P.O. Box 81465-313 Kaveh Ave. Isfahan - Iran

P.O. Box 81465-117, Isfahan, Iran

Wholly-owned subsidiary of MODAFL (and therefore a sister-organisation to AIO, AvIO and DIO). Its role is to manufacture electronic components for Iranian weapons systems.

Owned, controlled by, or acts on behalf of Iran

Electronics Industries

23.6.2008

26.7.2010

21.

Iran Insurance Company (a.k.a. Bimeh Iran)

121 Fatemi Ave., P.O. Box 14155-

6363 Tehran, Iran

P.O. Box 14155-6363, 107 Fatemi

Ave., Tehran, Iran

Iran Insurance Company has insured the purchase of various items that can be used in programmes that are sanctioned by UNSCR 1737. Purchased items insured include helicopter spare parts, electronics, and computers with applications in aircraft and missile navigation.

26.7.2010

22.

Iranian Aviation Industries Organ­

ization (IAIO)

Ave. Sepahbod Gharani P.O. Box

15815/1775 Tehran, Iran

Ave. Sepahbod Gharani P.O. Box

15815/3446 Tehran, Iran

107 Sepahbod Gharani Avenue, Tehran, Iran

A MODAFL (see no 29) organisation responsible for planning and managing Iran’s military aviation industry.

26.7.2010

23.

IRGC Air Force

Operates Iran's inventory of short and medium range ballistic missiles. The head of the IRGC air force was designated by UNSCR 1737 (2006)

23.6.2008

24.

IRGC-Air Force Al-Ghadir Missile

Command

The IRGC-Air Force Al-Ghadir Missile Command is a specific element within the IRGC Air Force that has been working with SBIG (designated under UNSCR

1737) with the FATEH 110, short range ballistic missile as well as the Ashura medium range ballistic missile. This command appears to be the entity that actually has the operational control of

the missiles.

26.7.2010

25.

IRGC Qods Force

Tehran, Iran

Iran's Islamic Revolutionary Guard Corps (IRGC) Qods Force is responsible for operations outside Iran and is Tehran's principal foreign policy tool for special operations and support to terrorists and Islamic militants abroad. Hizballah used Qods Force- supplied rockets, anti-ship cruise missiles (ASCMs), man-portable air defense systems (MANPADS), and unmanned aerial vehicles (UAVs) in the 2006 conflict with Israel and benefited from Qods Force training on these systems, according to press reporting. According to a variety of reports, the Qods Force continues to re-supply and train Hizballah on advanced weaponry, anti-aircraft missiles, and long-range rockets. The Qods Force continues to provide limited lethal support, training, and funding to Taliban fighters in southern and western Afghanistan including small arms, ammunition, mortars, and short-range battlefield rockets. Commander has been sanctioned under UNSCR

26.7.2010

26.

Islamic Republic of Iran Shipping Lines (IRISL) (including all branches) and subsidiaries:

No. 37, Aseman Tower, Sayyade Shirazee Square, Pasdaran Ave., PO Box 19395-1311. Tehran. Iran; No. 37,. Corner of 7th Narenjestan, Sayad Shirazi Square, After Noboyand Square, Pasdaran Ave., Tehran, Iran

IRISL has been involved in the shipment of military- related cargo, including proscribed cargo from Iran. Three such incidents involved clear violations that were reported to the UN Security Council Iran Sanctions Committee. IRISL's connection to prolif­ eration was such that the UNSC called on states to conduct inspections of IRISL vessels, provided there are reasonable grounds to believe that the vessel is transporting proscribed goods, in UNSCRs 1803 and

1929.

26.7.2010

VERŻJONI ELETTRONIKA

B 327

Name

Identifying information

Reasons

Date of listing

(a) Bushehr Shipping Company

Limited (Tehran)

(b) Hafize Darya Shipping Lines

(HDSL) (a.k.a HDS Lines)

(c) Hanseatic Trade Trust & Shipping (HTTS) GmbH

(d) Irano Misr Shipping Company

(e) Irinvestship Ltd

(f) IRISL (Malta) Ltd

(g) IRISL Club

(h) IRISL Europe GmbH (Hamburg)

(i) IRISL Marine Services and

Engineering Company

143/1 Tower Road Sliema, Slm

1604, Malta; c/o Hafiz Darya

Shipping Company, Ehteshamiyeh Square 60, Neyestani 7, Pasdaran, Tehran, Iran

No 35 Ehteshamieh SQ. Neyestan

7, Pasdaran, Tehran, Iran P.O. Box:

1944833546

Alt. Loc.: No. 60 Ehteshamiyeh

Square, 7th Neyestan Street, Pasdaran Avenue,

Tehran, Iran;

Alternative Address: Third Floor of

IRISL’s Aseman Tower

Schottweg 7, 22087 Hamburg, Germany;

Opp 7th Alley, Zarafshan St, Eivanak St, Qods Township; HTTS GmbH,

No 37 Asseman tower, Shahid Lavasani (Farmanieh) Junction, Pasdaran Ave. Tehran - Iran P.O. Box: 19395- 1311

Alt. Loc.: No 41, 3rd Floor, Corner of 6th Alley, Sunaei Street, Karim Khan Zand Ave, Tehran;

265, Next to Mehrshad, Sedaghat

St., Opposite of Mellat Park, Vali

Asr Ave., Tehran 1A001, Iran;

18 Mehrshad Street, Sadaghat St., Opposite of Mellat Park, Vali Asr

Ave., Tehran 1A001, Iran

Global House, 61 Petty France, London SW1H 9EU, United Kingdom;

Business Registration Document #

4110179 (United Kingdom)

Flat 1, 181 Tower Road, Sliema

SLM 1605, Malta

No 60 Ehteshamiyeh Square, 7th Neyestan Street, Pasdaran Avenue, Tehran

Schottweg 5, 22087 Hamburg, Germany

V.A.T. Number DE217283818 (Germany)

Sarbandar Gas Station PO Box

199, Bandar Imam Khomeini, Iran; Karim Khan Zand Ave, Iran Shahr Shomai, No 221, Tehran, Iran;

No 221, Northern Iranshahr Street,

Karim Khan Ave, Tehran, Iran

Owned or controlled by IRISL

Acts on behalf of IRISL performing container operations using vessels owned by IRISL.

Controlled and/or acting on behalf of IRISL.

Acts on behalf of IRISL, along the Suez Canal and in

Alexandria and Port Said. 51 %-owned by IRISL.

Owned by IRISL. Provides financial, legal, and insurance services for IRISL as well as marketing, chartering, and crew management.

Acts on behalf of IRISL in Malta. A joint venture with German and Maltese shareholding. IRISL has been using the Malta route since 2004 and uses Freeport as a trans-shipment hub between the Persian Gulf and Europe.

Owned by IRISL.

IRISL's agent in Germany.

Owned by IRISL. Provides fuel, bunkers, water, paint, lubricating oil and chemicals required by IRISL’s vessels. The company also provides main­ tenance supervision of ships as well as facilities and services for the crew members. IRISL subsidiaries have used US dollar-denominated bank accounts registered under cover-names in Europe and the Middle East to facilitate routine fund transfers. IRISL has facilitated repeated violations of provisions of UNSCR 1747.

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

B 328 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

(j) IRISL Multimodal Transport

Company

(k) IRITAL Shipping SRL

(l) ISI Maritime Limited (Malta)

(m) Khazer Shipping Lines (Bandar

Anzali)

(n) Leading Maritime Pte Ltd (a.k.a Leadmarine, a.k.a. Asia Marine Network Pte Ltd a.k.a. IRISL Asia Pte Ltd; a.k.a. Lead­ maritime)

(o) Marble Shipping Limited

(Malta)

(p) Oasis Freight Agency

(q) Safiran Payam Darya (a.k.a.

Safiran Payam Darya Shipping Lines, a.k.a SAPID Shipping Company)

(r) Santexlines (a.k.a. IRISL China Shipping Company Ltd, a.k.a. Yi Hang Shipping Company)

No 25, Shahid Arabi Line, Sanaei St, Karim Khan Zand Zand St Tehran. Iran

Commercial Registry Number: GE

426505 (Italy); Italian Fiscal Code:

03329300101 (Italy); V.A.T. Number: 12869140157 (Italy)

Ponte Francesco Morosini 59,

16126 Genova (GE), Italy;

147/1 St. Lucia Street, Valetta, Vlt

1185, Malta; c/o IranoHind Shipping Co. Ltd., Mehrshad Street, PO Box 15875, Tehran, Iran

No. 1; End of Shahid Mostafa Khomeini St., Tohid Square, O.O. Box 43145, Bandar Anzali 1711-

324, Iran; M. Khomeini St., Ghazian, Bandar Anzali, Gilan, Iran

200 Middle Road #14-01 Prime

Centre Singapore 188980 (alt.

199090)

143/1 Tower Road, Sliema, Slm

1604, Malta

Al Meena Street, Opposite Dubai Ports & Customs, 2nd Floor, Sharaf Building, Dubai UAE;

Sharaf Building, 1st Floor, Al Mankhool St., Bur Dubai, P.O. Box 5562, Dubai, United Arab

Emirates;

Sharaf Building, No. 4, 2nd Floor, Al Meena Road, Opposite

Customs, Dubai, United Arab

Emirates,

Kayed Ahli Building, Jamal Abdul

Nasser Road (Parallel to Al

Wahda St.), P.O. Box 4840, Sharjah, United Arab Emirates

No 1 Eighth Narengestan, Artesh

Street, Farmanieh, PO Box 19635-

1116, Tehran, Iran;

Alternative address: 33 Eighth

Narenjestan, Artesh Street, PO Box 19635-1116, Tehran, Iran; Alternative Address: Third Floor of IRISL’s Aseman Tower

Suite 1501, Shanghai Zhongrong Plaza, 1088, Pudong(S) road, Shanghai 200122, Shanghai, China Alternative Address: F23A-D, Times Plaza No. 1, Taizi Road, Shekou, Shenzhen 518067, China

Owned by IRISL. Responsible for the transporting of cargo by rail. It is a wholly controlled subsidiary of IRISL.

Point of contact for ECL and PCL services. Used by the DIO subsidiary Marine Industries Group (MIG; now known as Marine Industries Organization, MIO) which is responsible for the design and construction of various marine structures and both military and non- military vessels. DIO was designated under UNSCR 1737.

Owned or controlled by IRISL

100 % owned subsidiary of IRISL. Total fleet of six vessels. Operates in the Caspian Sea. Has facilitated shipments involving UN- and US-designated entities, such as Bank Mellli, by shipping cargo of prolif­ eration concern from countries like Russia and Kazakhstan to Iran.

Leadmarine, acts on behalf of HDSL in Singapore. Previously known as Asia Marine Network Pte Ltd and IRISL Asia Pte Ltd, and acted on behalf of IRISL in Singapore.

Owned or controlled by IRISL.

Acts on behalf of IRISL in the UAE providing fuel and stores, equipment, spare parts, and ship repairs. Also acts on behalf of HDSL.

Acts on behalf of IRISL performing bulk services

Santexlines act on behalf of HDSL. Previously known as IRISL China shipping Company, it acted on behalf of IRISL in China.

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

VERŻJONI ELETTRONIKA

B 329

Name

Identifying information

Reasons

Date of listing

(s) Shipping Computer Services

Company (SCSCOL)

(t) SISCO Shipping Company Ltd

(a.k.a IRISL Korea Ltd)

(u) Soroush Saramin Asatir (SSA)

(v) South Way Shipping Agency

Co Ltd

(w) Valfajr 8th Shipping Line Co. (a.k.a. Valfajr)

No 37 Asseman Shahid Sayyad Shirazee sq., Pasdaran ave., P.O. Box 1587553 1351, Tehran, Iran; No 13, 1st Floor, Abgan Alley, Aban ave., Karimkhan Zand Blvd, Tehran 15976, Iran.

Has offices in Seoul and Busan, South Korea.

No 5, Shabnam Alley, Golriz St., Shahid Motahhari Ave., Tehran- Iran, P.O. Box 19635- 114

No 14 (alt. 5) Shabnam Alley, Fajr Street, Shahid Motahhari Avenue, PO Box 196365-1114, Tehran Iran

No. 101, Shabnam Alley, Ghaem

Magham Street, Tehran, Iran

No 119, Corner Shabnam Ally, Shoaa Square Ghaem-Magam Farahani, Tehran - Iran P.O. Box

15875/4155

Alt. Loc.: Abyar Alley, Corner of Shahid Azodi St. & Karim Khan Zand Ave. Tehran, Iran;

Shahid Azodi St. Karim Khan Zand Zand Ave., Abiar Alley. PO Box 4155, Tehran, Iran

Owned or controlled by, or acts on behalf of, IRISL

Acts on behalf of IRISL in South Korea

Acts on behalf of IRISL. A Tehran-based ship management company acts as technical manager for many of SAPID’s vessels

Controlled by IRISL and acts for IRISL in Iranian ports overseeing such tasks as loading and unloading.

A 100 % owned subsidiary of IRISL. It conducts transfers between Iran and the Gulf States such as Kuwait, Qatar, Bahrain, UAE, and Saudi Arabia. Valfajr is a Dubai-based subsidiary of Islamic Republic of Iran Shipping Lines (IRISL) that provides ferry and feeder services, and sometimes couriers freight and passengers across the Persian Gulf. Valfajr in Dubai booked ship crews, booked supply vessel services, prepared ships for arrival and departure and for loading and unloading in port. Valfajr has port calls in the Persian Gulf and India. As of mid-June 2009, Valfajr shared the same building with IRISL in Port Rashid in Dubai, United Arab Emirates (UAE), and also shared the same building with IRISL in Tehran, Iran.

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

27.

Islamic Revolutionary Guard Corps

(IRGC)

Tehran, Iran

Responsible for Iran’s nuclear programme. Has oper­ ational control for Iran’s ballistic missile programme. Has undertaken procurement attempts to support Iran's ballistic missiles and nuclear programmes

26.7.2010

28.

Javedan Mehr Toos

Engineering firm that procures for the Atomic Energy Organisation of Iran which was designated under UNSCR 1737.

26.7.2010

29.

Kala Naft

Kala Naft Tehran Co, P.O. Box

15815/1775, Gharani Avenue, Tehran, Iran;

No 242 Shahid Kalantri Street -

Near Karim Khan Bridge - Sepahbod Gharani Avenue, Teheran;

Kish Free Zone, Trade Center, Kish

Island, Iran;

Kala Ltd., NIOC House, 4 Victoria

Street, London Sw1H1

Trades equipment for oil and gas sector that can be used for Iran’s nuclear programme. Attempted to procure material (very hard-wearing alloy gates) which have no use outside the nuclear industry. Has links to companies involved in Iran’s nuclear programme.

26.7.2010

B 330 VERŻJONI ELETTRONIKA

Name

Identifying information

Reasons

Date of listing

30.

Machine Sazi Arak

4th km Tehran Road, PO Box 148, Arak, Iran

Energy sector firm affiliated with IDRO that provides manufacturing support to the nuclear programme, including designated proliferation sensitive activities. Involved in the construction of the Arak heavy- water reactor. UK distributed an export denial notice in July 2009 against Machine Sazi Arak for an ‘alumina graphite stopper rod.’ In May 2009

Sweden denied the export to Machine Sazi Arak of

‘'cladding of dish ends for pressure vessels’.

26.7.2010

31.

Marine Industries

Pasdaran Av., PO Box 19585/ 777, Tehran

A subsidiary of the DIO

23.4.2007

32.

MASNA (Moierat Saakht Niroogahye Atomi Iran) Managing Company for the Construction of Nuclear Power Plants

Subordinate to AEOI and Novin Energy (both designated under UNSCR 1737). Involved in the development of nuclear reactors.

26.7.2010

33.

Mechanic Industries Group

Took part in the production of components for the ballistics programme.

23.6.2008

34.

Ministry of Defence and Armed

Forces Logistics (MODAFL)

West side of Dabestan Street, Abbas Abad District, Tehran

Responsible for Iran's defence research, development and manufacturing programmes, including support to missile and nuclear programmes.

23.6.2008

35.

Naserin Vahid

Naserin Vahid produces weapons parts on behalf of the IRGC. An IRGC front company.

26.7.2010

36.

Nuclear Fuel Production and

Procurement Company (NFPC)

AEOI-NFPD, P.O.Box: 11365-

8486, Tehran/Iran

P.O. Box 14144-1339, Endof

North Karegar Ave., Tehran, Iran

Nuclear Fuel Production Division (NFPD) of AEOI runs research and development in the field of nuclear fuel cycle including uranium exploration, mining, milling, conversion and nuclear waste management. The NFPC is the successor to the NFPD, the subsidiary company under the AEOI that runs research and development in the nuclear fuel cycle including conversion and enrichment.

23.4.2007

37.

Parchin Chemical Industries

Worked on propulsion techniques for the Iranian ballistics programme.

23.6.2008

38.

Parto Sanat Co

No. 1281 Valiasr Ave., Next to

14th St., Tehran, 15178 Iran.

Manufacturer of frequency changers and it is capable of developing/modifying imported foreign frequency changers in a way that makes them usable in gas centrifuge enrichment. It is deemed to be involved in nuclear proliferation activities.

26.7.2010

39.

Passive Defense Organization

Responsible for the selection and construction of strategic facilities, including – according to Iranian statements - the uranium enrichment site at Fordow (Qom) built without being declared to the IAEA contrary to Iran’s obligations (affirmed in a resolution by the IAEA Board of Governors). Brigadier General Gholam-Reza Jalali, former IRGC is PDO’s chairman.

26.7.2010

40.

Post Bank

237, Motahari Ave., Tehran, Iran

1587618118

Post Bank has evolved from being an Iranian domestic bank to a bank which facilitates Iran’s international trade. Acts on behalf of Bank Sepah (designated under UNSCR 1747), carrying out Bank Sepah’s transactions and hiding Bank Sepah’s connection with transactions in order to circumvent sanctions. In 2009 Post Bank facilitated business on behalf of Bank Sepah between Iran’s defence industries and overseas beneficiaries. Has facilitated business with front company for DPRK's Tranchon Commercial Bank, known for facilitating prolif­ eration-related-related business between Iran and the DPRK.

26.7.2010

VERŻJONI ELETTRONIKA

B 331

Name

Identifying information

Reasons

Date of listing

41.

Raka

A department of Kalaye Electric Company (designated under UNSCR 1737). Established in late 2006, it was responsible for the construction of the Uranium enrichment plant at Fordow (Qom).

26.7.2010

42.

Research Institute of Nuclear Science & Technology (a.k.a. Nuclear Science & Technology Research Institute)

Subordinate to the AEOI and continuing the work of its former Research Division. Its managing director is AEOI Vice President Mohammad Ghannadi (designated in UNSCR 1737).

26.7.2010

43.

Schiller Novin

Gheytariyeh Avenue - no 153 -

3rd Floor - PO BOX 17665/153

6 19389 Teheran

Acting on behalf of Defense Industries Organisation

(DIO).

26.7.2010

44.

Sepanir Oil and Gas Energy Engin­

eering Company (a.k.a. Sepah Nir)

A subsidiary of Khatam al-Anbya Construction

Headquarters which was designated under UNSCR

1929. Sepanir Oil and Gas Engineering Company is participating in Iran's South Pars offshore Phase

15-16 gas field development project.

26.7.2010

45.

Shahid Ahmad Kazemi Industrial

Group

SAKIG develops and produces surface-to-air missiles systems for Iran's military. It maintains military, missile, and air defense projects and procures goods from Russia, Belarus, and North Korea.

26.7.2010

46.

Shakhese Behbud Sanat

Involved in the production of equipment and parts for the nuclear fuel cycle.

26.7.2010

47.

State Purchasing Organisation

(SPO)

The SPO appears to facilitate the import of whole weapons. It appears to be a subsidiary of MODAFL

23.6.2008

48.

Technology Cooperation Office (TCO) of the Iranian President's Office

Tehran, Iran

Responsible for Iran's technological advancement through relevant foreign procurement and training links. Supports the nuclear and missile programmes.

26.7.2010

49.

Yasa Part, (including all branches)

and subsidiaries:

(a) Arfa Paint Company

(b) Arfeh Company

(c) Farasepehr Engineering

Company

(d) Hosseini Nejad Trading Co.

(e) Iran Saffron Company or Iran­

saffron Co.

(f) Shetab G.

(g) Shetab Gaman (h) Shetab Trading (i) Y.A.S. Co. Ltd

Company dealing with procurement activities related to the purchase of materials and technologies necessary to nuclear and ballistic programmes.

Acting on behalf of Yasa Part. Acting on behalf of Yasa Part. Acting on behalf of Yasa Part.

Acting on behalf of Yasa Part. Acting on behalf of Yasa Part.

Acting on behalf of Yasa Part. Acting on behalf of Yasa Part. Acting on behalf of Yasa Part.

Acting on behalf of Yasa Part.

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010

26.7.2010


WorldLII: Copyright Policy | Disclaimers | Privacy Policy | Feedback
URL: http://www.worldlii.org/mt/legis/laws/nipa365eoeusr201015o2011961