![]() |
Home
| Databases
| WorldLII
| Search
| Feedback
Maltese Laws |
PRODUCT SAFETY ACT (CAP. 427)
Motor Vehicles (EC Type Approval) (Amendment) ) Regulations,
2006
IN exercise of the powers conferred by articles 38 to 40 of the Product Safety Act, 2001, the Minister for Competitiveness and Communications, on the advice of the Malta Standards Authority, has made the following regulations>–
1. (1) The title of these regulations is the Motor Vehicles (EC Type Approval) (Amendment) Regulations, 2006, and they shall be read and construed as one with the Motor Vehicles (EC Type Approval) Regulations, 2002, hereinafter referred to as “the principal regulations”.
(2) These regulations implement the requirements of Directive 2004#104#EC of 14 October 2004 which adapts to technical progress Council directive 72#245#EEC relating to the radio interference (electromagnetic compatibility) of vehicles and amends Directive
70#156#EEC on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers.
Citation.
L.N. 95 of 2002
.
2006.
(3) These regulations have entered into force on 1st January,
2. For the List of Schedules and Schedules I to XV of the principal regulations, there shall be substituted the following>–
Substitutes Schedules to the principal regulations.
B 942
“ LIST OF SCHEDULES
Schedule I Complete list of Information for the purposes of vehicle EC type- approval
Schedule II Definition of vehicle categories and vehicle types
Schedule III Information document for the purpose of vehicle EC type-approval Schedule IV List of requirements for the purposes of vehicle EC type-approval Schedule V Procedures to be followed during vehicle EC type-approval Schedule VI Vehicle EC type-approval certificate
Schedule VII EC type-approval certificate numbering system
Schedule VIII Test results
Schedule IX EC Certificate of conformity
Schedule X Conformity of production procedures
Schedule XI Nature of and provisions for special purpose vehicles
Schedule XII Small series and end-of-series limits
Schedule XIII List of EC type-approvals issued pursuant to separate Directives
Schedule XIV Procedures to be followed during multi-stage EC type-approval
Schedule XV Certificate of origin of the vehicle - Manufacturer’s declaration of base/
incomplete vehicle of category other than M
Schedule XVI National Conditions and date of coming into force of separate directives and their amendments
B 943
SCHEDULE I (a)(Based on Annex I of the directive)COMPLETE LIST OF INFORMATION FOR THE PURPOSES OF EC VEHICLE TYPE-APPROVALAll information documents in this Directive and in separate Directives must consist only of extracts from, and adhere to the item numbering system of, this total list.
The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, must show sufficient detail.
If the systems, components or separate technical units have electronic controls information concerning their performance must be supplied.
(For explanatory notes, please refer to last page of this Annex)
0. GENERAL0.1. Make (trade name of manufacturer):……………………………………………………
0.2. Type:………………………………………………………………………………………...
0.2.0.1. Chassis:……………………………………………………………………………………
0.2.0.2. Bodywork/complete vehicle:……………………………………………………………...
0.2.1. Commercial name(s) (if available):……………………………………………………...
0.3. Means of identification of type, if marked on the vehicle(b):………………………………
0.3.0.1. Chassis:…………………………………………………………………………………….
0.3.0.2. Bodywork/complete vehicle:……………………………………………………………...
0.3.1. Location of that marking: ………………………………………………………………...
0.3.1.1. Chassis:…………………………………………………………………………………….
0.3.1.2. Bodywork/complete vehicle:……………………………………………………………...
0.4. Category of vehicle (c):…………………………………………………………………..
0.4.1. Classification(s) according to the dangerous goods which the vehicle
is intended to transport: ..……………………………………………………………...
0.5. Name and address of manufacturer:………………………………………………….
Name and address of authorized representative, if any:………………………………..
0.6. Location and method of attachment of statutory plates and location of vehicle identification number: …………………………………………………………….
0.6.1. On the chassis:………………………………………………………………………….
0.6.2. On the bodywork: ………………………………………………………………………
0.7. In the case of components and separate technical units, location and method of affixing of the EC approval mark: …………………………………………………..
0.8. Address(es) of assembly plant(s):……………………………………………………
B 944
<.. image removed ..>
B 945
<.. image removed ..>
B 946
<.. image removed ..>
B 947
<.. image removed ..>
B 948
<.. image removed ..>
B 949
<.. image removed ..>
B 950
<.. image removed ..>
B 951
<.. image removed ..>
B 952
<.. image removed ..>
B 953
<.. image removed ..>
B 954
<.. image removed ..>
B 955
<.. image removed ..>
B 956
<.. image removed ..>
B 957
<.. image removed ..>
B 958
<.. image removed ..>
B 959
<.. image removed ..>
B 960
<.. image removed ..>
B 961
<.. image removed ..>
B 962
<.. image removed ..>
B 963
<.. image removed ..>
B 964
<.. image removed ..>
B 965
<.. image removed ..>
B 966
<.. image removed ..>
B 967
<.. image removed ..>
B 968
<.. image removed ..>
B 969
<.. image removed ..>
B 970
<.. image removed ..>
B 971
<.. image removed ..>
B 972
<.. image removed ..>
B 973
<.. image removed ..>
B 974
<.. image removed ..>
B 975
<.. image removed ..>
B 976
<.. image removed ..>
B 977
<.. image removed ..>
B 978
<.. image removed ..>
B 979
<.. image removed ..>
B 980
<.. image removed ..>
B 981
<.. image removed ..>
B 982
<.. image removed ..>
B 983
<.. image removed ..>
B 984
<.. image removed ..>
B 985
<.. image removed ..>
B 986
<.. image removed ..>
B 987
<.. image removed ..>
B 988
<.. image removed ..>
B 989
<.. image removed ..>
B 990
<.. image removed ..>
B 991
Schedule II(Based on Annex II of the Directive)DEFINITION OF VEHICLE CATEGORIES AND VEHICLE TYPES A. DEFINITION OF VEHICLE CATEGORY
Vehicle categories are defined according to the following classification:
(Where reference is made to "maximum mass" in the following definitions, this means technically permissible maximum laden mass as specified in Point 2.8 of Annex I.)
1.
Category M: Motor vehicles with at least four wheels designed and constructed for the carriage of passengers.
Category M1: Vehicles designed and constructed for the carriage of passengers
and comprising no more than eight seats in addition to the driver's seat.
Category M2: Vehicles designed and constructed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having a maximum mass not exceeding 5t.
Category M3: Vehicles designed and constructed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having a maximum mass exceeding 5t.
The types of bodywork and codifications pertinent to vehicles of Category M are defined in Part C of this Annex Paragraph 1 (vehicles of Category M1) and Paragraph 2 (vehicles of Categories M2 and M3) to be used for the purpose specified in that Part.
2.
Category N: Motor vehicles with at least four wheels designed and constructed for the carriage of goods.
Category N1 Vehicles designed and constructed for the carriage of goods and having a maximum mass not exceeding 3,5t.
Category N2: Vehicles designed and constructed for the carriage of goods and having a maximum mass exceeding 3,5t but not exceeding 12t.
Category N3: Vehicles designed and constructed for the carriage of goods and having a maximum mass exceeding 12t.
In the case of a towing vehicle designed to be coupled to a semi-trailer or centre-axle trailer, the mass to be considered for classifying the vehicle is the mass of the tractor vehicle in running order, increased by the mass corresponding to the maximum static vertical load transferred to the tractor vehicle by the semi-trailer or centre-axle trailer and, where applicable, by the maximum mass of the tractor vehicle's own load.
The types of bodywork and codifications pertinent to vehicles of Category N are defined in Part
C of this Annex Paragraph 3 to be used for the purpose specified in that Part.
B 992
<.. image removed ..>
B 993
<.. image removed ..>
B 994
<.. image removed ..>
B 995
<.. image removed ..>
B 996
<.. image removed ..>
B 997
<.. image removed ..>
B 998
<.. image removed ..>
B 999
<.. image removed ..>
B 1000
<.. image removed ..>
B 1001
<.. image removed ..>
B 1002
<.. image removed ..>
B 1003
<.. image removed ..>
B 1004
(Based on Annex III of the Directive)INFORMATION DOCUMENT FOR THE PURPOSE OF VEHICLE EC TYPE-APPROVAL (For explanatory notes, please refer to last page of Annex I)
PART I
The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied
in appropriate scale and in sufficient detail on size A4, or on a folder of A4 format. Photographs, if any, must show sufficient
detail.
If the systems, components or separate technical units have electronic controls, information concerning their performance must be
supplied.
A: For Categories M and N
0. GENERAL
0.1. Make (trade name of manufacturer): ........................................................................................
0.2. Type: .........................................................................................................................................
0.2.1. Commercial name(s) (if available): ...........................................................................................
0.3. Means of identification of type, if marked on the vehicle(b): .....................................................
0.3.1. Location of that marking:...........................................................................................................
0.4. Category of vehicle (c): ..............................................................................................................
0.4.1. Classification(s) according to the dangerous goods which the vehicle is intended to transport: ...................................................................................................................................
0.5. Name and address of manufacturer: ........................................................................................
Name and address of authorized representative, if any:……………………………………………
0.8. Address(es) of assembly plant(s): ............................................................................................
1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE
1.1. Photographs and/or drawings of a representative vehicle:.......................................................
1.3. Number of axles and wheels:....................................................................................................
1.3.2. Number and position of steered axles: .....................................................................................
1.3.3. Powered axles (number, position, interconnection):.................................................................
1.4. Chassis (if any) (overall drawing):.............................................................................................
1.6. Position and arrangement of the engine:..................................................................................
1.8. Driving position: left/right (1)
1.8.1. Vehicle is equipped to be driven in right/left(1) hand traffic
B 1005
<.. image removed ..>
B 1006
<.. image removed ..>
B 1007
<.. image removed ..>
B 1008
<.. image removed ..>
B 1009
<.. image removed ..>
B 1010
7. . STEERING7.2. Transmission control…………………………………………………….………..………
7.2.1. Type of steering transmission (specify for front and rear if applicable):.…………………………..
7.2.2. Linkage to wheels (including other than mechanical means; specify for front and rear, if applicable):…………………………………………………………………………………………..
7.2.3. Method of assistance, if any:……………………………………………………..………………….
8. Brakes8.5. Anti-lock braking system: yes/no/optional (1)
8.9. Brief description of the braking system (according to item 1.6 of the Addendum to Appendix 1 of Annex IX to Directive 71/320/EEC):……………………………………………………………
8.11. Particulars of the type(s) of endurance braking systems(s)……………………………………..
9. Bodywork9.1. Type of bodywork………….......................................................................................................
9.3. Occupant doors, latches and hinges
9.3.1. Door configuration and number of doors……………………………………………………………
9.9. Devices for indirect vision
9.9.1. Mirrors (state for each mirror):……………………………………………………………………….
9.9.1.1. Make:………………………………………………………………………………………................
9.9.1.2. EC type-approval mark:…………………………………………………………..............................
9.9.1.3. Variant: ....................................................................................................................................
9.9.1.4. Drawing(s) for the identification of the mirror showing the position of the mirror relative to the vehicle structure:…………………………………………………………………………………….
9.9.1.5. Details of the method of attachment including that part of the vehicle structure to which it is attached:……………………………………………………………………………………………..
9.9.1.6. Optional equipment which may affect the rearward field of vision:……………………………...
9.9.1.7. A brief description of the electronic components (if any) of the adjustment system:………….
9.9.2. Devices for indirect vision other than mirrors:……………………………………………………..
9.9.2.1. Type and characteristics (such as a complete description of the device):……………………
9.9.2.1.1. In the case of a camera-monitor device, the detection distance (mm), contrast, luminance range, glare correction, display performance (black and white/colour), image repetition frequency, luminance reach of the monitor: ………………………………………………………
9.9.2.1.2. Sufficiently detailed drawings to identify the complete device, including installation instructions; the position for the EC type approval mark has to be indicated on the drawings:……………………………………………………………………………………………..
9.10. Interior fittings…………………………………………………………………………………………
9.10.3. Seats
9.10.3.1. Number:………………………………………………………………………………………………..
9.10.3.2 Position and Arrangement:………………………………………………………………………….
9.10.3.2.1. Number of seating positions:……………………………………………………………………….:
9.10.4.1. Type(s) of head restraints: integrated. Detachable/separate (1)
9.10.4.2 Type-approval number(s), if available:…………………………………………………………….
B 1011
<.. image removed ..>
B 1012
<.. image removed ..>
B 1013
<.. image removed ..>
B 1014
<.. image removed ..>
B 1015
<.. image removed ..>
B 1016
<.. image removed ..>
B 1017
<.. image removed ..>
B 1018
<.. image removed ..>
B 1019
<.. image removed ..>
B 1020
Schedule IV(Based on Annex IV of the Directive)
LIST OF REQUIREMENTS FOR THE PURPOSES OF VEHICLE EC TYPE-APPROVAL PART I
List of separate Directives
(As appropriate, taking account of the scope and latest amendment to each of the separate Directives listed below)
29.1.2004,
B 1021
Subject | Directive number | Official Journal | Applicability | |||||||||
Subject | Directive number | reference | M1 | M2 | M3 | N1 | N2 | N3 | O1 | O2 | O3 | O4 |
15. Seat strength 16. Exterior projections 17. Speedometer and reverse gear 18. Plates (statutory) 19. Seat belt anchorages 20. Installation of lighting and light signalling devices 21. Retro reflectors 22. End-outline, front-position (side), rear-position (side), stop, side marker, daytime running lamps 23. Direction indicators 24. Rear registration plate lamps 25. Headlamps (including bulbs) 26. Front fog lamps 27. Towing hooks 28. Rear fog lamps 29. Reversing lamps 30. Parking lamps 31. Seat belts | 74/408/EEC 74/483/EEC 75/443/EEC 76/114/EEC 76/115/EEC 76/756/EEC 76/757/EEC 76/758/EEC 76/759/EEC 76/760/EEC 76/761/EEC 76/762/EEC 77/389/EEC 77/538/EEC 77/539/EEC 77/540/EEC 77/541/EEC | L221, 12.8.1974, p. 1 L256, 2.10.1974, p. 4 L 196, 26.7.1975, p. 1 L 24, 30.1.1976, p. 1 L24, 30.1.1976, p. 6 L 262, 27.9.1976, p. 1 L 262, 27.9.1976, p. 32 L 262, 27.9.1976, p. 54 L262, 27.9.1976, p. 71 L 262, 27.9.1976, p. 85 L262, 27.9.1976, p. 96 L262, 27.9.1976, p. 122 L 145, 13.6.1977, p. 41 L220, 29.8.1977, p. 60 L 220, 29.8.1977, p. 72 L220, 29.8.1977, p. 83 L220, 29.8.1977, p. 95 | X X X X X X X X X X X X X X X X X | X X X X X X X X X X X X X X X X | X X X X X X X X X X X X X X X X | X X X X X X X X X X X X X X X X | X X X X X X X X X X X X X X X X | X X X X X X X X X X X X X X X X | X X X X X X X X | X X X X X X X X | X X X X X X X X | X X X X X X X X |
B 1022
Subject | Directive number | Official Journal | Applicability | |||||||||
Subject | Directive number | reference | M1 | M2 | M3 | N1 | N2 | N3 | O1 | O2 | O3 | O4 |
32. Forward vision 33. Identification of controls 34. Defrost/ demist 35. Wash/wipe 36. Heating systems 37. Wheel guards 38. Head restraints 39. CO2 emissions fuel consumption 40. Engine power 41. Diesel emissions 42. Lateral protection 43. Spray-suppression systems 44. Masses and dimensions (cars) 45. Safety glass 46. Tyres 47. Speed limiters 48. Masses and dimensions (other than vehicles referred to in item 44) | 77/649/EEC 78/316/EEC 78/317/EEC 78/318/EEC 2001/56/EEC 78/549/EEC 78/932/EEC 80/1268/ EEC 80/1269/ EEC 88/77/EEC 89/297/EEC 91/226/EEC 92/21/EEC 92/22/EEC 92/23/EEC 92/24/EEC 97/27/EC | L267, 19.10.1977, p. 1 L81, 28.3.1978, p. 3 L81, 28.3.1978, p. 27 L81, 28.3.1978, p. 49 L292, 9.11.2001, p. 21 L 168, 26.6.1978, p. 45 L325, 20.11.1978, p. 1 L375, 31.12.1980, p. 36 L375, 31.12.1980, p. 46 L 36, 9.2.1988, p. 33 L 124, 5.5.1989, p. 1 L 103, 23.4.1991, p. 5 L 129, 14.5.1992, p. 1 L 129, 14.5.1992, p. 11 L 129, 14.5.1992, p. 95 L 129, 14.5.1992, p. 154 L233, 28.8.1997, p. 1 | X X X X X X X X X X X X X | X (1) (2) X X X X X X | X (1) (2) X X X X X X X | X (1) (2) X X X X X X X | X (1) (2) X X X X X X X X X | X (1) (2) X X X X X X X X X | X X X X | X X X X | X X X X X X | X X X X X X |
B 1023
Subject | Directive number | Official Journal | Applicability | |||||||||
Subject | Directive number | reference | M1 | M2 | M3 | N1 | N2 | N3 | O1 | O2 | O3 | O4 |
49. External projections of cabs 50. Couplings 51. Flammability 52. Buses and coaches 53. Frontal impact 54. Side impact 56. Vehicles intended for the transport of dangerous goods 57. Front underrun protection 58. Pedestrian protection | 92/114/EEC 94/20/EC 95/28/EC / /EC 96/79/EC 96/27/EC 98/91/EC 2000/40/EC 2003/102/ EC | L409, 31.12.1992, p. 17 L 195, 29.7.1994, p. 1 L281, 23.11.1995, p. 1 L L 18, 21.1.1997, p. 7 L 169, 8.7.1996, p. 1 L 11, 16.1.1999, p. 25 L 203, 10.8.2000, p. 9 L321, 6.12.2003, p. 15 | X(3) X X 6 X( ) | X(3) X | X(3) X X | X X(3) X X(4) X(6) (7) | X X(3) X(4) X | X X(3) X(4) X | X X(4) | X X(4) | X X(4) | X X(4) |
X Directive applicable.
(1) Vehicles of this category shall be fitted with an adequate windscreen defrosting and demisting device.
(2) Vehicles of this category shall be fitted with adequate windscreen washing and wiping devices.
(3) The requirements of Directive 94/20/EC are only applicable for vehicles equipped with couplings.
(4) The requirements of Directive 98/91/EC are only applicable when the manufacturer
applies for the EC type-approval of a vehicle intended for the transport of dangerous goods
(5) In case of LPG or CNG vehicles, pending the adoption of the relevant amendments to
Directive 70/221/EEC in order to include LPG and CNG tanks, a vehicle approval according to UN/ECE Regulation 67-01 or 110 is required.
(6) not exceeding 2,5 tonnes maximum mass. (7) derived from M1 category vehicles.
B 1024
PART II
Where reference is made to a separate Directive, an approval issued under the following Regulations of the United Nations Economic Commission for Europe (taking account of the scope (1), and the amendment to each of the UN/ECE Regulations listed below) shall be recognised as an alternative to an EC type-approval granted under the relevant separate Directive in the table of Part I.
These Regulations are the ones to which the Community has adhered as a Contracting Party to the United Nations Economic Commission for Europe 'Revised 1958 Geneva Agreement' by virtue of Council Decision 97/836/EC (OJ L 346, 17.12.1997, p. 78), or subsequent Council decisions as provided for under Article 3(3) of that Decision.
Any further amendment of the UN/ECE Regulations listed below has also to be deemed to be equivalent, subject to the
Community decision provided for under Article 4(2) of Decision 97/836/EC (++).
Subject | Basic UN/ECE Regulation No | Series of amendments |
1. Sound levels | 51 | 02 |
1. Replacement silencing systems | 59 | 00 |
2. Emissions | 83 | 03 |
2. Replacement catalytic converters | 103 | 00 |
3. Rear protective device | 58 | 01 |
3. Fuel tanks | 34 | 01 |
3. Fuel tanks | 67 | 01 |
3. Fuel tanks | 110 | 00 |
5. Steering effort | 79 | 01 |
6. Door latches and hinges | 11 | 02 |
7. Audible warning | 28 | 00 |
8. Devices for indirect vision | 46 | 01 |
9. Braking | 13 | 09 |
9. Braking | 13H | 00 |
10. Radio suppression | 10 | 02 |
11. Diesel smoke | 24 | 03 |
12. Interior fittings | 21 | 01 |
13. Anti-theft | 18 | 02 |
13. Immobiliser | 97 | 00 |
13. Alarm systems | 97 | 00 |
14. Behaviour of steering device under impact | 12 | 03 |
15. Seat strength | 17 | 06 |
B 1025
Subject | Basic UN/ECE Regulation No | Series of amendments |
15. Seat strength (buses and coaches) | 80 | 01 |
16. Exterior projections | 26 | 02 |
17. Speedometer | 39 | 00 |
19. Seat belt anchorages | 14 | 04 |
20. Installation of lighting and light signalling devices | 48 | 01 |
21. Retro reflectors | 3 | 02 |
22. End-outline/front-position (side)/rear-position (side)/stop lamps | 7 | 02 |
22. Daytime running lamps | 87 | 00 |
22. Side marker lamps | 91 | 00 |
23. Direction indicators | 6 | 01 |
24. Rear registration plate lamp | 4 | 00 |
25. Headlamps (R2 and HS1) | 1 | 01 |
25. Headlamps (sealed beam) | 5 | 02 |
25. Headlamps (H1, H2, H3, HB3, HB4, H7, and/or H8) | 8 | 04 |
25. Headlamps (H4) | 20 | 02 |
25. Headlamps (halogen sealed beam) | 31 | 02 |
25. Filament lamps for use in approved lamp units | 37 | 03 |
25. Headlamps with gas-discharge light sources | 98 | 00 |
25. Gas-discharge light sources for use in approved gas-discharge lamp units | 99 | 00 |
26. Front fog lamps | 19 | 02 |
B 1026
Subject | Basic UN/ECE Regulation No | Series of amendments |
28. Rear fog lamps | 38 | 00 |
29. Reversing lamps | 23 | 00 |
30. Parking lamps | 77 | 00 |
31. Seat belts | 16 | 04 |
31. Child restraints | 44 | 03 |
38. Head restraints (combined with seats) | 17 | 06 |
38. Head restraints | 25 | 04 |
39. Fuel consumption | 101 | 00 |
40. Engine power | 85 | 00 |
41. Diesel emission | 49 | 02 |
42. Lateral protection | 73 | 00 |
45. Safety glass | 43 | 00 |
46. Tyres, motor vehicles and their trailers | 30 | 02 |
46. Tyres, commercial vehicles and their trailers | 54 | 00 |
46. Temporary-use spare wheels / tyres | 64 | 00 |
47. Speed limiters | 89 | 00 |
52. Strength of superstructure (buses) | 66 | 00 |
57. Front underrun protection | 93 | 00 |
(1) Where the separate Directives contain installation requirements, these apply also to components and separate technical units approved in accordance with the Regulations of the United Nations Economic Commission for Europe.
(++) For subsequent amendments, see UN/ECE TRANS/WP.29/343 in its latest revision.
B 1027
Schedule V(Based on Annex V of the Directive)
PROCEDURES TO BE FOLLOWED DURING VEHICLE EC TYPE-APPROVAL
1. In the case of an application for a whole vehicle type-approval, the EC type-approval authority must:
(a) verify that all separate Directive EC type-approvals are applicable to the appropriate standard in the relevant separate Directive;
(b) by reference to the documentation make sure that the vehicle specification(s) and data contained in Part I of the vehicle information document are included in the data in the information packages and/or the approval certificates of the relevant separate Directive approvals; and when an item number in Part I of the information document is not included in the information package of any of the separate Directives, confirm that the relevant part or characteristic conforms to the particulars in the information folder;
(c) on a selected sample of vehicles from the type to be approved carry out or arrange to be carried out inspections of vehicle parts and systems to verify that the vehicle(s) is/are built in accordance with the relevant data contained in the authenticated information package in respect of all separate Directive EC type-approvals;
(d) carry out or arrange to be carried out relevant installation checks in respect of separate technical units where applicable;
(e) carry out or arrange to be carried out necessary checks in respect of the presence of the devices provided for in Footnotes (1) and (2) of Part I of Annex IV where applicable.
2. The number of vehicles to be inspected for the purposes of Paragraph 1 (c) must be sufficient to permit the proper control of the various combinations to be type-approved according to the following criteria:
Vehicle category | M1 | M2 | M3 | N1 | N2 | N3 | O1 | O2 | O3 | O4 |
Criteria | ||||||||||
Engine | X | X | X | X | X | X | - | - | - | - |
Gear box | X | X | X | X | X | X | - | - | - | - |
Number of axles | - | X | X | X | X | X | X | X | X | X |
Powered axles (number, position, interconnection) | X | X | X | X | X | X | - | - | - | - |
Steered axles (number and position) | X | X | X | X | X | X | X | X | X | X |
Body styles | X | X | X | X | X | X | X | X | X | X |
Number of doors | X | X | X | X | X | X | X | X | X | X |
Hand of drive | X | X | X | X | X | X | - | - | - | - |
Number of seats | X | X | X | X | X | X | - | - | - | - |
Level of equipment | X | X | X | X | X | X | - | - | - | - |
B 1028
<.. image removed ..>
B 1029
Schedule VI(Based on Annex VI of the directive)MODEL
maximum format: A4 (210 x 297 mm)
EC TYPE-APPROVAL CERTIFICATE
Stamp of EC-type approval authority
Communication concerning: Of a type of:
— | EC type-approval(1) | — | complete vehicle (1) |
— | extension of EC type-approval (1) | — | completed vehicle (1) |
— | refusal of EC type-approvai (1) | — | incomplete vehicle (1) |
— | withdrawal of EC type-approval (1) | — | vehicle with complete and incomplete variants (1) |
— | vehicle with completed and incomplete | ||
variants (1) |
with regard to Directive 1970/156/EEC as last amended by Directive 2001/116/EC EC type-approval number:
Reason for extension:
0.1. Make (trade name of manufacturer):...................................................................................................
0.2. Type:....................................................................................................................................................
0.2.1. Commercial name(s) (2) :
....................................................................................................................
0.3. Means of identification of type, if marked on the vehicle: ..................................................................
0.3.1. Location of that marking:....................................................................................................................
0.4. Category of vehicle (3 ):.......................................................................................................................
.
(1) Delete where not applicable.
(2)
If not available at the time of granting the type-approval, this item shall be completed at the latest when the
vehicle is introduced on the market.
(3) As defined in Annex 11.A
B 1030
<.. image removed ..>
B 1031
<.. image removed ..>
B 1032
Schedule VII(Based on annex VII of the Directive)
EC TYPE-APPROVAL CERTIFICATE NUMBERING SYSTEM (1)
1. The EC type-approval number shall consist of four sections for whole vehicle type-approvals and five sections for system, component,
and separate technical unit type-approvals as detailed below. In all cases, the sections shall be separated by the "*"
character.
Section I: The lower case Letter "e" followed by the distinguishing number of the Member State issuing the EC type-approval:
1 for Germany;
2 for France;
3 for Italy;
4 for the Netherlands;
5 for Sweden;
6 for Belgium;
7 for Hungary
8 for the Czech Republic
9 for Spain;
11 for the United Kingdom;
12 for Austria;
13 for Luxembourg;
17 for Finland;
18 for Denmark;
20 for Poland
21 for Portugal;
23 for Greece;
24 for Ireland;
26 for Slovenia;
27 for Slovakia;
29 for Estonia;
32 for Latvia;
36 for Lithuania; CY for Cyprus; MT for Malta.
(1) Components and separate technical units shall be marked in accordance with the provisions of the relevant separate Directive.
B 1033
<.. image removed ..>
B 1034
Schedule VIII(Based on Annex VIII of the Directive) TEST RESULTS
(To be completed by the type-approval authority and attached to the vehicle EC type-approval certificate)
In each case, the information must make clear to which variant and version it is applicable. One version may not have more than one
result. However, a combination of several results per version indicating the worst case is permissible. In the latter case, a note
shall state that for items marked (*)only worst case results are given.
1. Results of the sound level tests
Number of the base Directive and latest amending Directive applicable to the approval. In the case of a Directive with two or more implementation stages, indicate also the implementation stage:...................................................................................................................................................
Variant/Version: | …….. | …….. | …….. |
Moving (dB(A)/E): | …….. | …….. | …….. |
Stationary (dB(A)/E): | …….. | …….. | …….. |
at (min-1): | …….. | …….. | …….. |
2. Results of the exhaust emission tests
Base Directive (1) :
— Directive 70/220/EEC concerning emissions from motor vehicles.
— Directive 88/77/EEC concerning emissions from engines for use in vehicles.
— Directive 72/306/EEC concerning diesel smoke.
2.1. Directive 70/220/EEC concerning emissions from motor vehicles.
Indicate the latest amending Directive applicable to the approval. In the case the Directive has two or more implementation stages,
indicate also the implementation stage:.......................................... Fuel(s) (2) :.................................. (diesel, petrol, LPG, NG, Bi-fuel: petrol/LPG, Bi-fuel: petrol/NG,
ethanol, etc.)
.
(1) Where applicable
(2) When restrictions for the fuel are applicable, indicate these restrictions (e.g. for natural gas the L-range or the H-range).
B 1035
<.. image removed ..>
B 1036
<.. image removed ..>
B 1037
<.. image removed ..>
B 1038
Schedule IX(Based on Annex IX of the Directive)
EC CERTIFICATE OF CONFORMITY For complete/completed (1) vehicles PART I
(Maximum format: A4 (210 x 297 mm), or a folder of A4 format)
Side 1
The undersigned:............................................................................................................................................
(Full name)
hereby certifies that the vehicle:
0.1. Make (Trade name of manufacturer): .................................................................................................
0.2. Type:....................................................................................................................................................
Variant(2) : ............................................................................................................................................
Version (2): ...........................................................................................................................................
0.2.1. Commercial name(s): ..........................................................................................................................
0.4. Category:.............................................................................................................................................
0.5. Name and address of the manufacturer of the base vehicle: .............................................................
Name and address of the manufacturer of the latest built stage of the vehicle (1): .............................
(1) Delete where not applicable.
(2) Indicate also the numerical or combined number/letter identification code. This code shall contain not more than 25 or 35 positions for a variant or version respectively.
B 1039
<.. image removed ..>
B 1040
<.. image removed ..>
B 1041
<.. image removed ..>
B 1042
<.. image removed ..>
B 1043
<.. image removed ..>
B 1044
<.. image removed ..>
B 1045
<.. image removed ..>
B 1046
<.. image removed ..>
B 1047
<.. image removed ..>
B 1048
45. Sound level:
Number of the base Directive and latest amending Directive applicable to the EC type-approval. In case of a Directive with two or more implementation stages, indicate also the implementation stage:
Stationary:............dB(A) at engine speed:.............min-1
Drive-by:...............dB(A)
46.1. Exhaust emissions (1) :
Number of the base Directive and latest amending Directive applicable to the approval. In case of a Directive with two or more implementation stages, indicate also the implementation stage:
1. test procedure:
CO:............. HC:............. NOX:................. HC + NOx:............. Smoke (corrected value of absorption coefficient (m-1)).... Particulates:.........
2 . test procedure (if applicable)
CO:........... NOx:......... NMHC:.......... CH4:............... Particulates:
46.2 CO2-emissions / fuel consumption (1) (N1 only):
Number of the base Directive and the last amending Directive applicable to the EC
type-approval:………………………………………………………………………………
………………………………………………………………………………………………….
CO2 - emissions | Fuel Consumption | |
Urban conditions | …….g/km | …….l/100km or for gaseous fuels m3 / 100km (2) |
Extra-urban conditions | ……..g/km | …….l/100km or for gaseous fuels m3 / 100km (2) |
Combined | ………g/km | …….l/100km or for gaseous fuels m3 / 100km (2) |
(1) Repeat for petrol and gaseous fuel in the case of a vehicle that can run either on petrol or on a gaseous fuel. The vehicles can be fuelled with both petrol and a gaseous fuel but, where the petrol system is fitted for emergency purposes or starting only and of which the petrol tank cannot contain more than 15 litres of petrol, will be regarded for the test, as vehicles which can only run a gaseous fuel.
(2) In the case of a vehicle that can run either on petrol or on a gaseous fuel, repeat for petrol and gaseous fuel. Vehicles where the petrol system is fitted for emergency purposes or starting only, and of which the petrol tank cannot contain more than 15 liters of petrol, will be regarded for the test as vehicles which can only run on a gaseous fuel
B 1049
47 Fiscal power or national code number(s) (if applicable):
Belgium: .............................. | Czech Republic: ………… | Denmark: ......................... |
Germany: ............................ | Estonia …………………… | Greece:............................. |
Spain:.................................. | France:................................ | Ireland: ............................. |
Italy: .................................... | Cyprus …………………… | Latvia …………………….. |
Lithuania …………………….. | Luxembourg: ...................... | Hungary ………………….. |
Malta: ………………………... | Netherlands: ...................... | Austria:............................. |
Poland: ……………………… | Portugal:.............................. | Slovenia …………………. |
Slovakia: ……………………. | Finland:............................... | Sweden:........................... |
United Kingdom: ................. |
48.1. EC type-approved according to the design requirements for transporting dangerous goods:
............ ..yes/class(es):............./no (3)
48.2. EC type-approved according to the design requirements for transporting certain animals:
yes/class(es):............./no (1)
50. Remarks:
51. Exemptions:
(3) Delete where not applicable
B 1050
<.. image removed ..>
B 1051
47. Fiscal power or national code number(s) (if applicable):
Belgium: .............................. | Czech Republic: ………… | Denmark: ......................... |
Germany: ............................ | Estonia …………………… | Greece:............................. |
Spain:.................................. | France:................................ | Ireland: ............................. |
Italy: .................................... | Cyprus …………………… | Latvia …………………….. |
Lithuania …………………….. | Luxembourg: ...................... | Hungary ………………….. |
Malta: ………………………... | Netherlands: ...................... | Austria:............................. |
Poland: ……………………… | Portugal:.............................. | Slovenia …………………. |
Slovakia: ……………………. | Finland:............................... | Sweden:........................... |
United Kingdom: ................. |
48.1. EC type-approved according to the design requirements for transporting dangerous goods:
yes/class(es):............./no (1)
48.2. EC type-approved according to the design requirements for transporting certain animals:
yes/class(es):............./no (1)
50. Remarks:………………………………………………………………………………………………
51. Exemptions: ………………………………………………………………………………………...
1
Delete where not applicable.
B 1052
<.. image removed ..>
B 1053
<.. image removed ..>
B 1054
<.. image removed ..>
B 1055
<.. image removed ..>
B 1056
<.. image removed ..>
B 1057
<.. image removed ..>
B 1058
<.. image removed ..>
B 1059
<.. image removed ..>
B 1060
<.. image removed ..>
B 1061
<.. image removed ..>
B 1062
<.. image removed ..>
B 1063
<.. image removed ..>
B 1064
<.. image removed ..>
B 1065
<.. image removed ..>
B 1066
Schedule X(Based on Annex X of the Directive) CONFORMITY OF PRODUCTION PROCEDURES
0. CONFORMITY OF PRODUCTION
Conformity of production to ensure conformity to the approved type including assessment of quality management systems referenced below
as initial assessment(1) and verification of the approval subject and product related controls referenced below as product conformity
arrangements.
1. INITIAL ASSESSMENT
1.1. The EC type-approval authority of a Member State must verify, before granting
EC type-approval, the existence of satisfactory arrangements and procedures for ensuring effective control so that components,
systems, separate technical units or vehicles when in production conform to the approved type.
1.2. The requirement in Point 1.1 must be verified to the satisfaction of the authority granting EC type-approval. That authority
shall be satisfied with the initial assessment and the initial product conformity arrangements at Section 2, taking account, as necessary,
of one of the arrangements described in Points 1.2.1 to 1.2.3, or a combination of those arrangements in full or in part as appropriate.
1.2.1. The actual initial assessment and/or verification of product conformity arrangements may be carried out by the EC type-approval authority granting EC type-approval or a technical service on behalf of the EC type-approval authority.
1.2.1.1. When considering the extent of the initial assessment to be carried out, the EC type-approval authority may take account
of available information relating to:
the manufacturer's certification described in Point 1.2.3, which has not been qualified or recognised under that paragraph,
in the case of component or separate technical unit EC type-approval, quality system assessments performed in the component or separate
technical unit manufacturer's premises by vehicle manufacturer(s), according to one or more of the industry sector specifications
satisfying the requirements in harmonised standard EN ISO 9002 — 1994, or
EN ISO 9001—2000 with the permissible exclusion of the requirements related to the concepts of design and development, Point
7.3 'Customer satisfaction and continual
improvement'.
(1) Guidance on the planning and conduct of assessment is to be found in harmonised standard ISO 10011, Parts 1, 2 and 3,1991.
B 1067
<.. image removed ..>
B 1068
<.. image removed ..>
B 1069
<.. image removed ..>
B 1070
Schedule XI(Based on Annex XI of the Directive)
NATURE OF AND PROVISIONS FOR SPECIAL-PURPOSE VEHICLES APPENDIX 1
MOTOR CARAVANS, AMBULANCES, AND HEARSES
2 3
B 1071
<.. image removed ..>
B 1072
<.. image removed ..>
B 1073
APPENDIX 2
ARMOUED VEHICLES
Item | Subject | Directive No. | M1 | M2 | M3 | N1 | N2 | N3 | O1 | O2 | O3 | O4 |
1 | Sound levels | 70/157/EEC | X | X | X | X | X | X | ||||
2 | Emissions | 70/220/EEC | A | A | A | A | A | A | ||||
3 | Fuel tanks/rear protective devices | 70/221/EEC | X | X | X | X | X | X | X | X | X | X |
4 | Rear registration plate space | 70/222/EEC | X | X | X | X | X | X | X | X | X | X |
5 | Steering effort | 70/311/EEC | X | X | X | X | X | X | X | X | X | X |
6 | Door latches and hinges | 70/387/EEC | X | X | X | X | ||||||
7 | Audible warning | 70/388/EEC | A+K | A+K | A+K | A+K | A+K | A+K | ||||
8 | Devices for indirect vision | 71/127/EEC | A | A | A | A | A | A | ||||
9 | Braking | 71/320/EEC | X | X | X | X | X | X | X | X | X | X |
10 | Suppression of radio interference | 72/245/EEC | X | X | X | X | X | X | X | X | X | X |
11 | Diesel smoke | 72/306/EEC | X | X | X | X | X | X | ||||
12 | Interior fittings | 74/60/EEC | A | |||||||||
13 | Anti-theft and immobiliser | 74/61/EEC | X | X | X | X | X | X | ||||
14 | Protective steering | 74/297/EEC | N/A | N/A | ||||||||
15 | Seat strength | 74/408/EEC | X | D | D | D | D | D | ||||
16 | Exterior projections | 74/483/EEC | A | |||||||||
17 | Speedometer and reverse gear | 75/443/EEC | X | X | X | X | X | X | ||||
18 | Plates (statutory) | 76/114/EEC | X | X | X | X | X | X | X | X | X | X |
19 | Seat belt anchorages | 76/115/EEC | A | A | A | A | A | A | ||||
20 | Installation of lighting and light-signalling devices | 76/756/EEC | A+N | A+N | A+N | A+N | A+N | A+N | A+N | A+N | A+N | A+N |
21 | Retro reflectors | 76/757/EEC | X | X | X | X | X | X | X | X | X | X |
B 1074
<.. image removed ..>
B 1075
<.. image removed ..>
B 1076
<.. image removed ..>
B 1077
Item | Subject | Directive No. | M2 | M3 | N1 | N2 | N3 | O1 | O2 | O3 | O4 |
23 | Direction indicators | 76/759/EEC | X | X | X | X | X | X | X | X | X |
24 | Rear registration plate lamps | 76/760/EEC | X | X | X | X | X | X | X | X | X |
25 | Headlamps (including bulbs) | 76/761/EEC | X | X | X | X | X | ||||
26 | Front fog lamps | 76/762/EEC | X | X | X | X | X | ||||
27 | Towing hooks | 77/389/EEC | A | A | A | A | A | ||||
28 | Rear fog lamps | 77/538/EEC | X | X | X | X | X | X | X | X | X |
29 | Reversing lamps | 77/539/EEC | X | X | X | X | X | X | X | X | X |
30 | Parking lamps | 77/540/EEC | X | X | X | X | X | ||||
31 | Seat belts | 77/541/EEC | D | D | D | D | D | ||||
33 | Identification of controls | 78/316/EEC | X | X | X | X | X | ||||
34 | Defrost/demist | 78/317/EEC | O | O | O | O | O | ||||
35 | Wash/wipe | 78/318/EEC | O | O | O | O | O | ||||
36 | Heating systems | 2001/56/EC | X | X | X | X | X | X | X | X | X |
40 | Engine power | 80/1269/EEC | X | X | X | X | X | ||||
41 | Diesel emissions | 88/77/EEC | H | H | H | H | H | ||||
42 | Lateral protection | 89/297/EEC | X | X | X | X | |||||
43 | Spray suppression systems | 91/226/EEC | X | X | X | X | |||||
45 | Safety glass | 92/22/EEC | J | J | J | J | J | J | J | J | J |
46 | Tyres | 92/23/EEC | X | X | X | X | X | X | X | X | X |
47 | Speed limiters | 92/24/EEC | X | X | X | ||||||
48 | Masses and dimensions | 97/27/EC | X | X | X | X | X | X | X | X | X |
49 | External projections of cabs | 92/114/EEC | X | X | X | ||||||
50 | Couplings | 94/20/EC | X | X | X | X | X | X | X | X | X |
51 | Flammability | 95/28/EC | X | ||||||||
52 | Buses and coaches | .../.../EC | X | X | |||||||
54 | Side impact | 96/27/EC | A | ||||||||
56 | Vehicles intended for the transport of dangerous goods | 98/91/EC | X | X | X | X | X | X | |||
57 | Front underrun protection | 2000/40/EC | X | X | |||||||
58 | Pedestrian protection | 2003/102/EC |
B 1078
<.. image removed ..>
B 1079
Item | Subject | Directive No | Mobile crane of Category N |
31 | Seat belts | 77/541/EEC | D |
33 | Identification of controls | 78/316/EEC | X |
34 | Defrost/demist | 78/317/EEC | O |
35 | Wash/wipe | 78/318/EEC | O |
36 | Heating systems | 2001/56/EC | X |
40 | Engine power | 80/1269/EEC | X |
41 | Diesel emissions | 88/77/EEC | V |
42 | Lateral protection | 89/297/EEC | X |
43 | Spray-suppression systems | 91/226/EEC | X |
45 | Safety glass | 92/22/EEC | J |
46 | Tyres | 92/23/EEC | A, provided that the requirements in ISO 10571 1995 (E) or ETRTO Standards Manual 1998 are fulfilled. |
47 | Speed limiters | 92/24/EEC | X |
48 | Masses and dimensions | 97/27/EC | X |
49 | External projections of cabs | 92/114/EEC | X |
50 | Couplings | 94/20/EC | X |
57 | Front underrun protection | 2000/40/EC | X |
B 1080
MEANING OF LETTERSX: No exemptions except those specified in the separate Directive. N/A: This Directive is not applicable to this vehicle (no requirements).
A Exemption permitted where special purposes make it impossible to fully comply. The manufacturer shall demonstrate this to the satisfaction of the type-approval authority that the vehicle cannot meet the requirements
due to its special purpose.
B Application limited to doors giving access to the seats designated for normal use when the vehicle is travelling on the road, and where the distance between the R-point of the seat and the average plane of the door surface, measured perpendicular to the longitudinal medium plane of the vehicle, does not exceed 500 mm.
C: Application limited to that part of the vehicle in front of the rearmost seat designated for normal use when the vehicle is travelling on the road and also limited to the head impact zone as defined in Directive 74/60/EEC.
D: Application limited to seats designated for normal use when the vehicle is travelling on the road. E Front only.
F: Modification to the routing and length of the refuelling duct and re-positioning of the tank inboard is permissible. G: Requirements according to the category of the base/incomplete vehicle (the chassis of which was used to build the
special purpose vehicle). In the case of incomplete/completed vehicles, it is acceptable that the requirements for vehicles of the corresponding Category N (based on maximum mass) are satisfied.
H: Modification of exhaust system length after the last silencer not exceeding 2 m is permissible without any further test.
J. For all window glazing other than driver's cab glazing (windshield and side glasses), the material may be either of safety glass or rigid plastic glazing.
K Additional panic alarm devices permitted.
L: Application limited to seats designated for normal use when the vehicle is travelling on the road. At least anchorages for lap belts are required in the rear seating positions.
M: Application limited to seats designated for normal use when the vehicle is travelling on the road. At least lap belts are required in all rear seating positions.
N: Provided that all mandatory lighting devices are installed and that the geometric visibility is not affected. O: The vehicle shall be fitted with an adequate system in the front.
Q: Modification of exhaust system length after the last silencer not exceeding 2 m is permissible without any further test. An EC type-approval issued to the most representative base vehicle remains valid irrespective of change in the reference weight.
R: Provided that the registration plates of all member states can be mounted and remain visible.
S: The light transmission factor is at least 60%, also the 'A' pillar obstruction angle is not more than 10°.
T: Test to be performed only with the complete/completed vehicle. The vehicle can be tested according to Directive 70/157/EEC as last amended by 99/101/EC. Concerning point 5.2.2.1 of Annex I to Directive
70/157/EEC the following limit values are applicable:
81 dB(A) for vehicles with an engine power of less than 75 kW
83 dB(A) for vehicles with an engine power of not less than 75 kW but less than 150 kW
84 dB(A) for vehicles with an engine power of not less than 150 kW
U: Test to be performed only with the complete/completed vehicle. Vehicles up to four axles shall comply with all the requirements laid down by Directive 1971/320/EEC. Derogations are admitted for vehicles having more than four axles, provided that:
they are justified by the particular construction
all the braking performances, related to parking, service and secondary braking laid down by Directive
1971/320/EEC are fulfilled.
V: The compliance with Directive 1997/68/EC can be accepted. Y: Provided that all mandatory lighting devices are installed.
B 1081
Schedule XII(Based on Annex XII of the Directive)
SMALL SERIES AND END-OF-SERIES LIMITS
A. SMALL SERIES LIMITS
The number of units of one family of types as defined below to be registered sold or entered into service per year in one Member State shall not exceed the figure shown below for the vehicle category in question.
Category | Units |
M1 | 500 |
M2, M3 | 250 |
N1 | 500 |
N2, N3 (*) | 250 |
O1, O2 | 500 |
O3, O4 | 250 |
(*) For mobile cranes, 20 units. |
A 'family of types' shall consist of vehicles which do not differ in the following essential respects:
1. For the purpose of Category M1
— the manufacturer,
— essential aspects of construction and design:
— chassis/floor pan (obvious and fundamental differences),
— power plant (internal combustion/electric/hybrid).
2. For the purpose of Category M2 and M3:
— the manufacturer,
— category,
— essential aspects of construction and design:
— chassis/self-supporting body (obvious and fundamental differences),
— power plant (internal combustion/electric/hybrid),
— number of axles.
B 1082
<.. image removed ..>
B 1083
Schedule XIII(Based on Annex XIII of the Directive)
LIST OF EC TYPE-APPROVALS ISSUED PURSUANT TO SEPARATE DIRECTIVES
Type-approval authority stamp
List number:.......................................................................
Covering the period................................................. to …………………………………………………………
The following information in respect of each EC type-approval granted, refused or withdrawn in the
abovementioned period must be given:
Manufacturer:..................................................................................................................................................
EC type-approval number:..............................................................................................................................
Reason for extension (where applicable):......................................................................................................
Make:..............................................................................................................................................................
Type:...............................................................................................................................................................
Date of issue:..................................................................................................................................................
First date of issue (in the case of extensions):...............................................................................................
B 1084
Schedule XIV(Based on Annex XIV of the Directive)
PROCEDURES TO BE FOLLOWED DURING MULTI-STAGE EC TYPE-APPROVAL
1. GENERAL
1.1. The satisfactory operation of the process of multi-stage EC type-approval requires joint action by all the manufacturers concerned.
To this end approval authorities must ensure, before granting first and subsequent stage approval, that suitable arrangements exist
between the relevant manufacturers for the supply and interchange of documents and information such that the completed vehicle
type meets the technical requirements of all the relevant separate Directives as prescribed in Annex IV or Annex XI. Such information
must include details of relevant system, component and separate technical unit approvals and of vehicle parts which form part of
the
incomplete vehicle but are not yet approved.
1.2. EC type-approvals in accordance with this Annex are granted on the basis of the current state of completion of the vehicle type
and must incorporate all approvals granted at earlier stages.
1.3. Each manufacturer in a multi-stage EC type-approval process is responsible for the approval and conformity of production of
all systems, components or separate technical units manufactured by him or added by him to the previously built stage. He is not
responsible for subjects which have been approved in an earlier stage except in those cases where he modifies relevant parts to
an extent that the previously granted approval becomes invalid.
2. PROCEDURES
The type-approval authority must:
(a) verify that all relevant separate Directive EC type-approvals are applicable to the appropriate standard in the separate Directive;
(b) ensure that all the relevant data, taking account of the state of completion of the vehicle, is included in the information
folder;
(c) by reference to the documentation make sure that the vehicle specification(s) and data contained in Part I of the vehicle
information folder are included in the data in the information packages and/or the approval certificates of the relevant separate
Directive
EC type-approvals; and in the case of a completed vehicle, where an item number in Part I of the information folder is not included
in the information package of any of the separate Directives, confirm that the relevant part of characteristic conforms to the particulars
in the information folder;
(d) on a selected sample of vehicles from the type to be approved carry out or arrange to be carried out inspections of vehicle
parts and systems to verify that the vehicle(s) is/are built in accordance with the relevant data contained in the authenticated
information package in respect of all relevant separate Directive EC type-approvals;
(e) carry out or arrange to be carried out relevant installation checks in respect of separate technical units where applicable.
B 1085
<.. image removed ..>
B 1086
<.. image removed ..>
B 1087
Schedule XV(Based on Annex XV of the Directive) CERTIFICATE OF ORIGIN OF THE VEHICLE
Manufacturers declaration of base/incomplete vehicle of Category other than M1
Declaration number:
I, the undersigned, hereby declare that the vehicle as specified below, has been manufactured in our own factory and that it is a
newly manufactured vehicle.
0.1. Make (trade name of manufacturer):...................................................................................................
0.2. Type of vehicle: ...................................................................................................................................
0.2.1. Commercial name(s): ..........................................................................................................................
0.3. Means of identification of type:............................................................................................................
0.6. Vehicle identification number: .............................................................................................................
0.8. Address(es) of assembly plant(s):.......................................................................................................
Moreover, the undersigned declares that the vehicle when delivered complied with the following
Directives:
Subject | Directive number | EC type-approval number | Member State granting (1) |
1. Sound level | |||
2. Emissions | |||
3. ... | |||
etc. | |||
(1) To be indicated if not obtainable from the EC type-approval numbers. |
The present declaration is issued according to the provisions established in Annex XI to this Directive.
…………………………….. | .............…………………….. | ……………………………… | ". |
(Place) | (Signature) | (Date) |
Ippubblikat mid-Dipartiment ta’ l-Informazzjoni (doi.gov.mt) — Valletta — Published by the Department of Information (doi.gov.mt) — Valletta
Mitbug[ fl-Istamperija tal-Gvern — Printed at the Government Printing Press
Prezz Lm2.96ç – Price Lm2.96c
WorldLII:
Copyright Policy
|
Disclaimers
|
Privacy Policy
|
Feedback
URL: http://www.worldlii.org/mt/legis/laws/psa427mvtar200655o2006763