P.U.(A) 351/99
INDUSTRIAL DESIGNS REGULATIONS 1999
PART II - APPLICATION AND PROCEDURE FOR REGISTRATION OF INDUSTRIAL DESIGN
Regulation 10. Size, etc. of documents.
(1) Subject to any directions that may be given by the Registrar in any particular case, all applications, notices, papers having representations thereon, and other documents filed under the Act or these Regulations -
(a) shall be in A4 size (29. 7 cm x 21 cm) strong paper;
(b) except where otherwise required, shall appear on one side only;
(c) shall be free from cracks, creases or folds; and
(d) shall be so presented as to admit of direct reproduction by photography, electrostatic process, photo offset
and microfilming, with representations appearing on one side with a left-hand margin of approximately 3 cm.
(2) Representations shall be filed in six copies.
(3) Where representations consist of specimens, the specimens shall be of a size not exceeding 20 cm x 20 cm x 20 cm.
(4) The Registrar may require the specimens to be replaced by representations comprising of drawings, tracings or photographs.
(5) The photographs and drawings shall be of a size of 12. 5 cm x 9 cm.
(6) In an application where words, letters or numerals appear in an industrial design, the Registrar may require that a disclaimer of any right to their exclusive use shall appear on each representation.
